The Aeroplane Speaks. Fifth Edition

By H. Barber

The Project Gutenberg EBook of The Aeroplane Speaks, by H. Barber

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org


Title: The Aeroplane Speaks
       Fifth Edition

Author: H. Barber

Release Date: June 10, 2007 [EBook #21791]

Language: English


*** START OF THIS PROJECT GUTENBERG EBOOK THE AEROPLANE SPEAKS ***




Produced by Jonathan Ingram, Marvin A. Hodges, David Garcia
and the Online Distributed Proofreading Team at
http://www.pgdp.net






[Illustration: THE FLIGHT FOLK.]






THE AEROPLANE SPEAKS

BY H. BARBER, A.F.Ae.S.

(CAPTAIN, ROYAL FLYING CORPS)


WITH 36 FULL PAGES OF "TYPES OF AEROPLANES" AND 87 SKETCHES AND DIAGRAMS

_FIFTH EDITION_


LONDON

McBRIDE, NAST & CO., LTD.




THE AEROPLANE SPEAKS.

  _First edition--December, 1916_
  _Second edition--February, 1917_
  _Third edition--April, 1917_
  _Fourth edition--July, 1917_
  _Fifth edition--December, 1917_


FIRST REVIEWS:

  =C. G. G. in the AEROPLANE:= "One hopes that the Subaltern
  Flying Officer will appreciate the gift which the author has
  given him out of his own vast store of experience, for the book
  contains the concentrated knowledge of many expensive years in
  tabloid form, or perhaps one should say in condensed milk form,
  seeing that it is easy to swallow and agreeable to the taste,
  as well as wholesome and nourishing. And, besides the young
  service aviator, there are thousands of young men, and women
  also, now employed in the aircraft industry, who will appreciate
  far better the value of the finicky little jobs they are doing
  if they will read this book and see how vital is their work to
  the man who flies."

  =THE FIELD:= "Entirely different from any other text-book on
  the subject, not merely in its form, but in its capacity to convey
  a knowledge of the principles and practice of flying. Undoubtedly
  it is the best book on its subject."

  =THE UNITED SERVICE GAZETTE:= "Should be in the hands of every
  person interested in aviation."

  =THE OUTLOOK:= "As amusing as it is instructive."

  =THE MORNING POST:= "Should be read and re-read by the would
  be and even the experienced pilot."



  PRINTED IN ENGLAND BY
  BILLING AND SONS, LIMITED
  GUILDFORD




  DEDICATED
  TO THE
  SUBALTERN FLYING OFFICER




MOTIVE


The reasons impelling me to write this book, the maiden effort of
my pen, are, firstly, a strong desire to help the ordinary man to
understand the Aeroplane and the joys and troubles of its Pilot; and,
secondly, to produce something of _practical_ assistance to the Pilot
and his invaluable assistant the Rigger. Having had some eight years'
experience in designing, building, and flying aeroplanes, I have hopes
that the practical knowledge I have gained may offset the disadvantage
of a hand more used to managing the "joy-stick" than the dreadful
haltings, the many side-slips, the irregular speed, and, in short,
the altogether disconcerting ways of a pen.

The matter contained in the Prologue appeared in the _Field_ of May 6th,
13th, 20th, and 27th, 1916, and is now reprinted by the kind permission
of the editor, Sir Theodore Cook.

I have much pleasure in also acknowledging the kindness of Mr. C. G.
Grey, editor of the _Aeroplane_, to whom I am indebted for the valuable
illustrations reproduced at the end of this book.




CONTENTS


  _PROLOGUE_

                                                                    PAGE

    _PART I.--THE ELEMENTARY PRINCIPLES AIR THEIR GRIEVANCES_          1
        _II.--THE PRINCIPLES, HAVING SETTLED THEIR DIFFERENCES,
                FINISH THE JOB_                                       15
       _III.--THE GREAT TEST_                                         27
        _IV.--CROSS COUNTRY_                                          38

  CHAPTER I.--FLIGHT                                                  55
         II.--STABILITY AND CONTROL                                   70
        III.--RIGGING                                                 90
         IV.--PROPELLERS                                             115
          V.--MAINTENANCE                                            126

  TYPES OF AEROPLANES                                                130

  GLOSSARY                                                           133






THE AEROPLANE SPEAKS




PROLOGUE

PART I

THE ELEMENTARY PRINCIPLES AIR THEIR GRIEVANCES


The Lecture Hall at the Royal Flying Corps School for Officers was
deserted. The pupils had dispersed, and the Officer Instructor, more
fagged than any pupil, was out on the aerodrome watching the test of
a new machine.

Deserted, did I say? But not so. The lecture that day had been upon
the Elementary Principles of Flight, and they lingered yet. Upon the
Blackboard was an illustration thus:

[Illustration]

"I am the side view of a Surface," it said, mimicking the tones of the
lecturer. "Flight is secured by driving me through the air at an angle
inclined to the direction of motion."

"Quite right," said the Angle. "That's me, and I'm the famous Angle
of Incidence."

"And," continued the Surface, "my action is to deflect the air
downwards, and also, by fleeing from the air behind, to create a
semi-vacuum or rarefied area over most of the top of my surface."

"This is where I come in," a thick, gruff voice was heard, and went
on: "I'm the Reaction. You can't have action without me. I'm a very
considerable force, and my direction is at right-angles to you," and
he looked heavily at the Surface. "Like this," said he, picking up
the chalk with his Lift, and drifting to the Blackboard.

[Illustration: The action of the surface upon the air.]

"I act in the direction of the arrow R, that is, more or less, for the
direction varies somewhat with the Angle of Incidence and the curvature
of the Surface; and, strange but true, I'm stronger on the top of the
Surface than at the bottom of it. The Wind Tunnel has proved that by
exhaustive research--and don't forget how quickly I can grow! As the
speed through the air increases my strength increases more rapidly than
you might think--approximately, as the Square of the Speed; so you see
that if the Speed of the Surface through the air is, for instance,
doubled, then I am a good deal more than doubled. That's because I am
the result of not only the mass of air displaced, but also the result of
the Speed and consequent Force with which the Surface engages the Air. I
am a product of those two factors, and at the speeds at which Aeroplanes
fly to-day, and at the altitudes and consequent density of air they at
present experience, I increase at about the Square of the Speed.

"Oh, I'm a most complex and interesting personality, I assure you--in
fact, a dual personality, a sort of aeronautical Dr. Jekyll and Mr.
Hyde. There's Lift, my vertical part or _component_, as those who prefer
long words would say; he always acts vertically upwards, and hates
Gravity like poison. He's the useful and admirable part of me. Then
there's Drift, my horizontal component, sometimes, though rather
erroneously, called Head Resistance; he's a villain of the deepest dye,
and must be overcome before flight can be secured."

[Illustration]

"And I," said the Propeller, "I screw through the air and produce the
Thrust. I thrust the Aeroplane through the air and overcome the Drift;
and the Lift increases with the Speed, and when it equals the Gravity
or Weight, then--there you are--Flight! And nothing mysterious about
it at all."

"I hope you'll excuse me interrupting," said a very beautiful young
lady, "my name is Efficiency, and, while, no doubt, all you have said is
quite true, and that, as my young man the Designer says, 'You can make a
tea-tray fly if you slap on Power enough,' I can assure you that I'm not
to be won quite so easily."

"Well," eagerly replied the Lift and the Thrust, "let's be friends. Do
tell us what we can do to help you to overcome Gravity and Drift with
the least possible Power. That obviously seems the game to play, for
more Power means heavier engines, and that in a way plays into the hands
of our enemy, Gravity, besides necessitating a larger Surface or Angle
to lift the Weight, and that increases the Drift."

"Very well," from Efficiency, "I'll do my best, though I'm so shy, and
I've just had such a bad time at the Factory, and I'm terribly afraid
you'll find it awfully dry."

[Illustration]

"Buck up, old dear!" This from several new-comers, who had just
appeared. "We'll help you," and one of them, so lean and long that
he took up the whole height of the lecture room, introduced himself.

"I'm the High Aspect Ratio," he said, "and what we have got to do to
help this young lady is to improve the proportion of Lift to Drift.
The more Lift we can get for a certain area of Surface, the greater
the Weight the latter can carry; and the less the Drift, then the less
Thrust and Power required to overcome it. Now it is a fact that, if the
Surface is shaped to have the greatest possible span, _i.e._, distance
from wing-tip to wing-tip, it then engages more air and produces both
a maximum Reaction and a better proportion of Lift to Drift.

"That being so, we can then well afford to lose a little Reaction by
reducing the Angle of Incidence to a degree giving a still better
proportion of Lift to Drift than would otherwise be the case; for you
must understand that the Lift-Drift Ratio depends very much upon the
size of the Angle of Incidence, which should be as small as possible
within certain limits. So what I say is, make the surface of Infinite
Span with no width or _chord_, as they call it. That's all I require,
I assure you, to make me quite perfect and of infinite service to Miss
Efficiency."

[Illustration]

"That's not practical politics," said the Surface. "The way you talk one
would think you were drawing £400 a year at Westminster, and working up
a reputation as an Aeronautical Expert. I must have some depth and chord
to take my Spars and Ribs, and again, I must have a certain chord to
make it possible for my Camber (that's curvature) to be just right for
the Angle of Incidence. If that's not right the air won't get a nice
uniform compression and downward acceleration from my underside, and the
rarefied 'suction' area over the top of me will not be as even and clean
in effect as it might be. That would spoil the Lift-Drift Ratio more
than you can help it. Just thrust that chalk along, will you? and the
Blackboard will show you what I mean."

"Well," said the Aspect Ratio, "have it your own way, though I'm sorry
to see a pretty young lady like Efficiency compromised so early in the
game."

"Look here," exclaimed a number of Struts, "we have got a brilliant
idea for improving the Aspect Ratio," and with that they hopped up on
to the Spars. "Now," excitedly, "place another Surface on top of us.
Now do you see? There is double the Surface, and that being so, the
proportion of Weight to Surface area is halved. That's less burden of
work for the Surface, and so the Spars need not be so strong and so
deep, which results in not so thick a Surface. That means the Chord
can be proportionately decreased without adversely affecting the Camber.
With the Chord decreased, the Span becomes relatively greater, and so
produces a splendid Aspect Ratio, and an excellent proportion of Lift
to Drift."

"I don't deny that they have rather got me there," said the Drift; "but
all the same, don't forget my increase due to the drift of the Struts
and their bracing wires."

"Yes; I dare say," replied the Surface, "but remember that my Spars are
less deep than before, and consequently I am not so thick now, and shall
for that reason also be able to go through the air with a less
proportion of Drift to Lift."

"Remember me also, please," croaked the Angle of Incidence. "Since
the Surface has now less weight to carry for its area, I may be set
at a still lesser and finer Angle. That means less Drift again. We are
certainly getting on splendidly! Show us how it looks now, Blackboard."
And the Blackboard obligingly showed them as follows:

[Illustration]

"Well, what do you think of that?" they all cried to the Drift.

"You think you are very clever," sneered the Drift. "But you are not
helping Efficiency as much as you think. The suction effect on the top
of the lower Surface will give a downward motion to the air above it and
the result will be that the bottom of the top Surface will not secure as
good a Reaction from the air as would otherwise be the case, and that
means loss of Lift; and you can't help matters by increasing the gap
between the surfaces because that means longer Struts and Wires, and
that in itself would help me, not to speak of increasing the Weight.
You see it's not quite so easy as you thought."

At this moment a hiccough was heard, and a rather fast and
rakish-looking chap, named Stagger, spoke up. "How d'ye do, miss," he
said politely to Efficiency, with a side glance out of his wicked old
eye. "I'm a bit of a knut, and without the slightest trouble I can
easily minimize the disadvantage that old reprobate Drift has been
frightening you with. I just stagger the top Surface a bit forward, and
no longer is that suction effect dead under it. At the same time I'm
sure the top Surface will kindly extend its Span for such distance as
its Spars will support it without the aid of Struts. Such extension will
be quite useful, as there will be no Surface at all underneath it to
interfere with the Reaction above." And the Stagger leaned forward and
picked up the Chalk, and this is the picture he drew:

[Illustration]

Said the Blackboard, "That's not half bad! It really begins to look
something like the real thing, eh?"

"The real thing, is it?" grumbled Drift. "Just consider that contraption
in the light of any one Principle, and I warrant you will not find one
of them applied to perfection. The whole thing is nothing but a
Compromise." And he glared fixedly at poor Efficiency.

"Oh, dear! Oh, dear!" she cried. "I'm always getting into trouble. What
_will_ the Designer say?"

"Never mind, my dear," said the Lift-Drift Ratio, consolingly. "You are
improving rapidly, and quite useful enough now to think of doing a job
of work."

"Well, that's good news," and Efficiency wiped her eyes with her Fabric
and became almost cheerful. "Suppose we think about finishing it now?
There will have to be an Engine and Propeller, won't there? And a body
to fix them in, and tanks for oil and petrol, and a tail, and," archly,
"one of those dashing young Pilots, what?"

"Well, we are getting within sight of those interesting Factors," said
the Lift-Drift Ratio, "but first of all we had better decide upon the
Area of the Surfaces, their Angle of Incidence and Camber. If we are to
ascend as quickly as possible the Aeroplane must be _slow_ in order to
secure the best possible lift-drift ratio; for the drift of the struts,
wires, body, etc., increases approximately as the square of the speed,
but it carries with it no lift as it does in the case of the Surface.
The less speed then, the less such drift, and the better the Aeroplane's
proportion of lift to drift; and, being slow, we shall require a _large
Surface_ in order to secure a large lift relative to the weight to be
carried. We shall also require a _large Angle of Incidence_ relative to
the horizontal, in order to secure a proper inclination of the Surface
to the direction of motion, for you must remember that, while we shall
fly upon an even keel and with the propeller thrust horizontal (which is
its most efficient attitude), our flight path, which is our direction of
motion, will be sloping upwards, and it will therefore be necessary to
fix the Surface to the Aeroplane at a very considerable angle relative
to the horizontal Propeller Thrust in order to secure a proper angle to
the upwards direction of motion. Apart from that, we shall require a
larger Angle of Incidence than in the case of a machine designed purely
for speed, and that means a correspondingly _large Camber_.

"On the other hand, if we are thinking merely of Speed, then a _small
Surface_, just enough to lift the weight off the ground, will be best;
also a _small Angle_ to cut the Drift down, and that, of course, means
a relatively _small Camber_.

"So you see the essentials for _Climb_ or quick ascent and for _Speed_
are diametrically opposed. Now which is it to be?"

"Nothing but perfection for me," said Efficiency. "What I want is
Maximum Climb and Maximum Speed for the Power the Engine produces."

And each Principle fully agreed with her beautiful sentiments, but work
together they would not.

The Aspect Ratio wanted infinite Span, and hang the Chord.

[Illustration: Maximum Climb. Maximum Speed.]

The Angle of Incidence would have two Angles and two Cambers in one,
which was manifestly absurd; the Surface insisted upon no thickness
whatever, and would not hear of such things as Spars and Ribs; and the
Thrust objected to anything at all likely to produce Drift, and very
nearly wiped the whole thing off the Blackboard.

There was, indeed, the makings of a very pretty quarrel when the Letter
arrived. It was about a mile long, and began to talk at once.

"I'm from the Inventor," he said, and hope rose in the heart of each
heated Principle. "It's really absurdly simple. All the Pilot has to do
is to touch a button, and at his will, VARY the area of the Surface, the
Angle of Incidence, and the Camber! And there you are--Maximum Climb or
Maximum Speed as required! How does that suit you?"

"That suits us very well," said the Surface, "but, excuse me asking,
how is it done without apparatus increasing the Drift and the Weight
out of all reason? You won't mind showing us your Calculations,
Working Drawings, Stress Diagrams, etc., will you?"

Said the Letter with dignity, "I come from an Inventor so brilliantly
clever as to be far above the unimportant matters you mention. He is no
common working man, sir! He leaves such things to Mechanics. The point
is, you press a button and----"

"Look here," said a Strut, rather pointedly, "where do you think you
are going, anyway?"

"Well," from the Letter, "as a matter of fact, I'm not addressed yet,
but, of course, there's no doubt I shall reach the very highest quarters
and absolutely revolutionize Flight when I get there."

Said the Chalk, "I'll address you, if that's all you want; now drift
along quickly!" And off went the Letter to The Technical Editor, "Daily
Mauler," London.

And a League was formed, and there were Directors with Fees, and several
out-of-service Tin Hats, and the Man-who-takes-the-credit, and a fine
fat Guinea-pig, and all the rest of them. And the Inventor paid his
Tailor and had a Hair-Cut, and is now a recognized _Press_ Expert--but
he is still waiting for those Mechanics!

"I'm afraid," said the Slide-rule, who had been busy making those
lightning-like automatic calculations for which he is so famous, "it's
quite impossible to fully satisfy all of you, and it is perfectly plain
to me that we shall have to effect a Compromise and sacrifice some of
the Lift for Speed."

Thud! What was that?

Efficiency had fainted dead away! The last blow had been too much for
her. And the Principles gathered mournfully round, but with the aid of
the Propeller Slip[1] and a friendly lift from the Surface she was at
length revived and regained a more normal aspect.

Said the Stagger with a raffish air, "My dear young lady, I assure you
that from the experiences of a varied career, I have learned that
perfection is impossible, and I am sure the Designer will be quite
satisfied if you become the Most Efficient Compromise."

"Well, that sounds so common sense," sighed Efficiency, "I suppose it
must be true, and if the Designer is satisfied, that's all I really care
about. Now do let's get on with the job."

[Illustration]

So the Chalk drew a nice long slim body to hold the Engine and the
tanks, etc., with room for the Pilot's and Passenger's seats, and placed
it exactly in the middle of the Biplane. And he was careful to make its
position such that the Centre of Gravity was a little in advance of the
Centre of Lift, so that when the Engine was not running and there was
consequently no Thrust, the Aeroplane should be "nose-heavy" just to the
right degree, and so take up a natural glide to Earth--and this was to
help the Pilot and relieve him of work and worry, should he find himself
in a fog or a cloud. And so that this tendency to glide downwards should
not be in evidence when the Engine was running and descent not desired,
the Thrust was placed a little below the Centre of Drift or Resistance.
In this way it would in a measure pull the nose of the Aeroplane up and
counter-balance the "nose-heavy" tendency.

And the Engine was so mounted that when the Propeller-Thrust was
horizontal, which is its most efficient position, the Angle of Incidence
and the Area of the surfaces were just sufficient to give a Lift a
little in excess of the Weight. And the Camber was such that, as far as
it was concerned, the Lift-Drift Ratio should be the best possible for
that Angle of Incidence. And a beautifully simple under-carriage was
added, the outstanding features of which were simplicity, strength,
light-weight, and minimum drift. And, last of all, there was the
Elevator, of which you will hear more by-and-by. And this is what
it looked like then:

[Illustration]

And Efficiency, smiling, thought that it was not such a bad compromise
after all, and that the Designer might well be satisfied.

"Now," said she, "there's just one or two points I'm a bit hazy about.
It appears that when the Propeller shaft is horizontal and so working in
its most efficient attitude, I shall have a Lift from the Surfaces
slightly in excess of the Weight. That means I shall ascend slightly, at
the same time making nearly maximum speed for the power and thrust.
Can't I do better than that?"

"Yes, indeed," spoke up the Propeller, "though it means that I must
assume a most undignified attitude, for helicopters[2] I never approved
of. In order to ascend more quickly the Pilot will deflect the Elevator,
which, by the way, you see hinged to the Tail. By that means he will
force the whole Aeroplane to assume a greater Angle of Incidence. And
with greater Angle, the Lift will increase, though I'm sorry to say the
Drift will increase also. Owing to the greater Drift, the Speed through
the air will lessen, and I'm afraid that won't be helpful to the Lift;
but I shall now be pointing upwards, and besides overcoming the Drift in
a forward direction, I shall be doing my best to haul the Aeroplane
skywards. At a certain angle known as the Best Climbing Angle, we shall
have our Maximum Margin of Lift, and I'm hoping that may be as much as
almost a thousand feet altitude a minute."

[Illustration: The angles shown above are only roughly approximate, as
they vary with different types of aeroplanes.]

"Then, if the Pilot is green, my chance will come," said the Maximum
Angle of Incidence. "For if the Angle is increased over the Best
Climbing Angle, the Drift will rush up; and the Speed, and with it the
Lift, will, when my Angle is reached, drop to a point when the latter
will be no more than the Weight. The Margin of Lift will have entirely
disappeared, and there we shall be, staggering along at my tremendous
angle, and only just maintaining horizontal flight."

"And then with luck I'll get my chance," said the Drift. "If he is a bit
worse than green, he'll perhaps still further increase the Angle. Then
the Drift, largely increasing, the Speed, and consequently the Lift,
will become still less, _i.e._, less than the Weight, and then--what
price pancakes.[3] Eh?"

"Thank you," from Efficiency, "that was all most informing. And now will
you tell me, please, how the greatest Speed may be secured?"

"Certainly, now it's my turn," piped the Minimum Angle of Incidence.
"By means of the Elevator, the Pilot places the Aeroplane at my small
Angle, at which the Lift only just equals the Weight, and, also, at
which we shall make greater speed with no more Drift than before.
Then we get our greatest Speed, just maintaining horizontal flight."

"Yes; though I'm out of the horizontal and thrusting downwards,"
grumbled the Propeller, "and that's not efficient, though I suppose it's
the best we can do until that Inventor fellow finds his Mechanics."

"Thank you so much," said Efficiency. "I think I have now at any rate
an idea of the Elementary Principles of Flight, and I don't know that I
care to delve much deeper, for sums always give me a headache; but isn't
there something about Stability and Control? Don't you think I ought to
have a glimmering of them too?"

"Well, I should smile," said a spruce Spar, who had come all the way
from America. "And that, as the Lecturer says, 'will be the subject of
our next lecture,' so be here again to-morrow, and you will be glad to
hear that it will be distinctly more lively than the subject we have
covered to-day."

[Footnote 1: Propeller Slip: As the propeller screws through the air,
the latter to a certain extent gives back to the thrust of the propeller
blades, just as the shingle on the beach slips back as you ascend it.
Such "give-back" is known as "slip," and anyone behind the propeller
will feel the slip as a strong draught of air.]

[Footnote 2: Helicopter: An air-screw revolving upon a vertical axis.
If driven with sufficient power, it will lift vertically, but, having
regard to the mechanical difficulties of such construction, it is a
most inefficient way of securing lift compared with the arrangement
of an inclined surface driven by a propeller revolving about a
horizontal axis.]

[Footnote 3: Pancakes: Pilot's slang for stalling an aeroplane and
dropping like a pancake.]




PART II

THE PRINCIPLES, HAVING SETTLED THEIR DIFFERENCES, FINISH THE JOB


Another day had passed, and the Flight Folk had again gathered together
and were awaiting the arrival of Efficiency who, as usual, was rather
late in making an appearance.

The crowd was larger than ever, and among the newcomers some of the most
important were the three Stabilities, named Directional, Longitudinal,
and Lateral, with their assistants, the Rudder, Elevator, and Ailerons.
There was Centrifugal Force, too, who would not sit still and created a
most unfavourable impression, and Keel-Surface, the Dihedral Angle, and
several other lesser fry.

"Well," said Centrifugal Force, "I wish this Efficiency I've heard so
much about would get a move on. Sitting still doesn't agree with me at
all. Motion I believe in. There's nothing like motion--the more the
better."

"We are entirely opposed to that," objected the three Stabilities, all
in a breath. "Unless it's in a perfectly straight line or a perfect
circle. Nothing but perfectly straight lines or, upon occasion, perfect
circles satisfy us, and we are strongly suspicious of your tendencies."

"Well, we shall see what we shall see," said the Force darkly. "But who
in the name of blue sky is this?"

And in tripped Efficiency, in a beautifully "doped" dress of the latest
fashionable shade of khaki-coloured fabric, a perfectly stream-lined
bonnet, and a bewitching little Morane parasol,[4] smiling as usual, and
airily exclaiming, "I'm so sorry I'm late, but you see the Designer's
such a funny man. He objects to skin friction,[5] and insisted upon me
changing my fabric for one of a smoother surface, and that delayed me.
Dear me, there are a lot more of us to-day, aren't there? I think I
had better meet one at a time." And turning to Directional Stability,
she politely asked him what he preferred to do.

"My purpose in life, miss," said he, "is to keep the Aeroplane on its
course, and to achieve that there must be, in effect, more Keel-Surface
behind the Vertical Turning Axis than there is in front of it."

[Illustration]

Efficiency looking a little puzzled, he added: "Just like a weathercock,
and by Keel-Surface I mean everything you can see when you view the
Aeroplane from the side of it--the sides of the body, struts, wires,
etc."

"Oh, now I begin to see light," said she; "but just exactly how does
it work?"

"I'll answer that," said Momentum. "When perhaps by a gust of air the
Aeroplane is blown out of its course and points in another direction, it
doesn't immediately fly off on that new course. I'm so strong I pull it
off the new course to a certain extent, and towards the direction of the
old course. And so it travels, as long as my strength lasts, in a more
or less sideways position."

"Then," said the Keel-Surface, "I get a pressure of air all on one side,
and as there is, in effect, most of me towards the tail, the latter gets
pressed sideways, and the Aeroplane thus tends to assume its first
position and course."

"I see," said Efficiency, and, daintily holding the Chalk, she
approached the Blackboard. "Is this what you mean?"

"Yes, that's right enough," said the Keel-Surface, "and you might
remember, too, that I always make the Aeroplane nose into the gusts
rather than away from them."

"If that was not the case," broke in Lateral Stability, and affecting
the fashionable Flying Corps stammer, "it would be a h-h-h-o-r-rible
affair! If there were too much Keel-Surface in front, then that gust
would blow the Aeroplane round the other way a very considerable
distance. And the right-hand Surface being on the outside of the turn
would have more speed, and consequently more Lift, than the Surface on
the other side. That means a greater proportion of the Lift on that
side, and before you could say Warp to the Ailerons over the Aeroplane
would go--probable result a bad side-slip" (see illustration A,
over-leaf).

"And what can the Pilot do to save such a situation as that?" said
Efficiency.

"Well," replied Lateral Stability, "he will try to turn the Aeroplane
sideways and back to an even keel by means of warping the Ailerons or
little wings which are hinged on to the Wing-tips, and about which you
will hear more later on; but if the side-slip is very bad he may not be
able to right the Aeroplane by means of the Ailerons, and then the only
thing for him to do is to use the Rudder and to turn the nose of the
Aeroplane down and head-on to the direction of motion. The Aeroplane
will then be meeting the air in the direction it is designed to do so,
and the Surfaces and also the controls (the Rudder, Ailerons, and
Elevator) will be working efficiently; but its attitude relative to the
earth will probably be more or less upside-down, for the action of
turning the Aeroplane's nose down results, as you will see by the
illustration B, in the right wing, which is on the outside of the
circle, travelling through the air with greater speed than the left-hand
wing. More Speed means more Lift, so that results in overturning the
Aeroplane still more; but now it is, at any rate, meeting the air as it
is designed to meet it, and everything is working properly. It is then
only necessary to warp the Elevator, as shown in illustration C, in
order to bring the Aeroplane into a proper attitude relative to the
earth."

[Illustration]

"Ah!" said the Rudder, looking wise, "it's in a case like that when I
become the Elevator and the Elevator becomes me."

"That's absurd nonsense," said the Blackboard, "due to looseness of
thought and expression."

"Well," replied the Rudder, "when the Aeroplane is in position A and I
am used, then I depress or _elevate_ the nose of the machine; and, if
the Elevator is used, then it turns the Aeroplane to right or left,
which is normally my function. Surely our _rôles_ have changed one with
the other, and I'm then the Elevator and the Elevator is me!"

[Illustration]

Said Lateral Stability to the Rudder, "That's altogether the wrong way
of looking at it, though I admit"--and this rather sarcastically--"that
the way you put it sounds rather fine when you are talking of your
experiences in the air to those 'interested in aviation' but knowing
little about it; but it won't go down here! You are a Controlling
Surface designed to turn the Aeroplane about a certain axis of the
machine, and the Elevator is a Controlling Surface designed to turn the
Aeroplane about another axis. Those are your respective jobs, and you
can't possibly change them about. Such talk only leads to confusion, and
I hope we shall hear no more of it."

"Thanks," said Efficiency to Lateral Stability. "And now, please, will
you explain your duties?"

"My duty is to keep the Aeroplane horizontal from Wing-tip to Wing-tip.
First of all, I sometimes arrange with the Rigger to _wash-out_, that
is decrease, the Angle of Incidence on one side of the Aeroplane, and
to effect the reverse condition, if it is not too much trouble, on the
other side."

"But," objected Efficiency, "the Lift varies with the Angle of Incidence,
and surely such a condition will result in one side of the Aeroplane
lifting more than the other side?"

"That's all right," said the Propeller, "it's meant to off-set the
tendency of the Aeroplane to turn over sideways in the opposite
direction to which I revolve."

"That's quite clear, though rather unexpected; but how do you counteract
the effect of the gusts when they try to overturn the Aeroplane
sideways?" said she, turning to Lateral Stability again.

"Well," he replied, rather miserably, "I'm not nearly so perfect as the
Longitudinal and Directional Stabilities. The Dihedral Angle--that is,
the upward inclination of the Surfaces towards their wing-tips--does
what it can for me, but, in my opinion, it's a more or less futile
effort. The Blackboard will show you the argument." And he at once
showed them two Surfaces, each set at a Dihedral Angle like this:

[Illustration: H.E., Horizontal equivalent.]

"Please imagine," said the Blackboard, "that the top =V= is the front
view of a Surface flying towards you. Now if a gust blows it into the
position of the lower =V= you see that the horizontal equivalent of the
Surface on one side becomes larger, and on the other side it becomes
smaller. That results in more lift on the lower side and less on the
higher side, and if the =V= is large enough it should produce such a
difference in the lift of one side to the other as to quickly turn
the Aeroplane back to its former and normal position."

"Yes," said the Dihedral Angle, "that's what would happen if they would
only make me large enough; but they won't do it because it would too
greatly decrease the total horizontal equivalent, and therefore the
Lift, and incidentally it would, as Aeroplanes are built to-day, produce
an excess of Keel Surface above the turning axis, and that in itself
would spoil the Lateral Stability. The Keel Surface should be equally
divided above and below the longitudinal turning axis (upon which the
Aeroplane rolls sideways), or the side upon which there is an excess
will get blown over by the gusts. It strikes me that my future isn't
very promising, and about my only chance is when the Junior Draughtsman
makes a mistake, as he did the other day. And just think of it, they
call him a Designer now that he's got a job at the Factory! What did he
do? Why, he calculated the weights wrong and got the Centre of Gravity
too high, and they didn't discover it until the machine was built. Then
all they could do was to give me a larger Angle. That dropped the bottom
of the =V= lower down, and as that's the centre of the machine, where all
the Weight is, of course that put the Centre of Gravity in its right
place. But now there is too much Keel Surface above, and the whole
thing's a Bad Compromise, not at all like Our Efficiency."

And Efficiency, blushing very prettily at the compliment, then asked,
"And how does the Centre of Gravity affect matters?"

"That's easy," said Grandfather Gravity. "I'm so heavy that if I am too
low down I act like a pendulum and cause the Aeroplane to roll about
sideways, and if I am too high I'm like a stick balanced on your finger,
and then if I'm disturbed, over I go and the Aeroplane with me; and, in
addition to that, there are the tricks I play with the Aeroplane when
it's banked up,[6] _i.e._, tilted sideways for a turn, and Centrifugal
Force sets me going the way I'm not wanted to go. No; I get on best with
Lateral Stability when my Centre is right on the centre of drift, or, at
any rate, not much below it." And with that he settled back into the
Lecturer's Chair and went sound asleep again, for he was so very, very
old, in fact the father of all the Principles.

And the Blackboard had been busy, and now showed them a picture of the
Aeroplane as far as they knew it, and you will see that there is a
slight Dihedral Angle, and also, fixed to the tail, a vertical Keel
Surface or _fin_, as is very often the case in order to ensure the
greater effect of such surface being behind the vertical turning axis.

[Illustration]

But Efficiency, growing rather critical with her newly gained knowledge,
cried out: "But where's the horizontal Tail Surface? It doesn't look
right like that!"

"This is when I have the pleasure of meeting you, my dear," said
Longitudinal Stability. "Here's the Tail Surface," he said, "and in
order to help me it must be set _in effect_ at a much less Angle
of Incidence than the Main Surface. To explain we must trouble the
Blackboard again," and this was his effort:

[Illustration]

"I have tried to make that as clear as possible," he said. "It may
appear a bit complicated at first, but if you will take the trouble to
look at it for a minute you will find it quite simple. A is the normal
and proper direction of motion of the Aeroplane, but, owing to a gust of
air, it takes up the new nose-down position. Owing to Momentum, however,
it does not fly straight along in that direction, but moves more or less
in the direction B, which is the resultant of the two forces, Momentum
and Thrust. And so you will note that the Angle of Incidence, which
is the inclination of the Surfaces to the Direction of Motion, has
decreased, and of course the Lift decreases with it. You will also
see, and this is the point, that the Tail Surface has lost a higher
proportion of its Angle, and consequently its Lift, than has the Main
Surface. Then, such being the case, the Tail must fall and the Aeroplane
assume its normal position again, though probably at a slightly lower
altitude."

"I'm afraid I'm very stupid," said Efficiency, "but please tell me why
you lay stress upon the words '_in effect_.'"

"Ah! I was wondering if you would spot that," he replied. "And there is
a very good reason for it. You see, in some Aeroplanes the Tail Surface
may be actually set at the same Angle on the machine as the Main
Surface, but owing to the air being deflected downwards by the front
Main Surface it meets the Tail Surface at a lesser angle, and indeed in
some cases at no angle at all. The Tail is then for its surface getting
less Lift than the Main Surface, although set at the same angle on the
machine. It may then be said to have _in effect_ a less Angle of
Incidence. I'll just show you on the Blackboard."

[Illustration]

"And now," said Efficiency, "I have only to meet the Ailerons and the
Rudder, haven't I?"

"Here we are," replied the Ailerons, or little wings. "Please hinge us
on to the back of the Main Surfaces, one of us at each Wing-tip, and
join us up to the Pilot's joystick by means of the control cables. When
the Pilot wishes to tilt the Aeroplane sideways, he will move the stick
and depress us upon one side, thus giving us a larger Angle of Incidence
and so creating more Lift on that side of the Aeroplane; and, by means
of a cable connecting us with the Ailerons on the other side of the
Aeroplane, we shall, as we are depressed, pull them up and give them
a reverse or negative Angle of Incidence, and that side will then
get a reverse Lift or downward thrust, and so we are able to tilt the
Aeroplane sideways.

"And we work best when the Angle of Incidence of the Surface in front
of us is very small, for which reason it is sometimes decreased or
_washed-out_ towards the Wing-tips. The reason of that is that by the
time the air reaches us it has been deflected downwards--the greater the
Angle of Incidence the more it is driven downwards--and in order for
us to secure a Reaction from it, we have to take such a large Angle of
Incidence that we produce a poor proportion of Lift to Drift; but the
smaller the Angle of the Surface in front of us the less the air is
deflected downwards, and consequently the less Angle is required of us,
and the better our proportion of Lift to Drift, which, of course, makes
us much more effective Controls."

[Illustration: "Wash out" on both sides.]

"Yes," said the Lateral and Directional Stabilities in one voice,
"that's so, and the wash-out helps us also, for then the Surfaces
towards their Wing-tips have less Drift or 'Head-Resistance,' and
consequently the gusts will affect them and us less; but such decreased
Angle of Incidence means decreased Lift as well as Drift, and the
Designer does not always care to pay the price."

"Well," said the Ailerons, "if it's not done it will mean more work for
the Rudder, and that won't please the Pilot."

"Whatever do you mean?" asked Efficiency. "What can the Rudder have to
do with you?"

"It's like this," they replied: "when we are deflected downwards we gain
a larger Angle of Incidence and also enter an area of compressed air,
and so produce more Drift than those of us on the other side of the
Aeroplane, which are deflected upwards into an area of rarefied air due
to the _suction_ effect (though that term is not academically correct)
on the top of the Surface. If there is more Drift, _i.e._, Resistance,
on one side of the Aeroplane than on the other side, then of course it
will turn off its course, and if that difference in Drift is serious, as
it will very likely be if there is no wash-out, then it will mean a good
deal of work for the Rudder in keeping the Aeroplane on its course,
besides creating extra Drift in doing so."

"I think, then," said Efficiency, "I should prefer to have that
wash-out,[7] and my friend the Designer is so clever at producing
strength of construction for light weight, I'm pretty sure he won't
mind paying the price in Lift. And now let me see if I can sketch the
completed Aeroplane."

[Illustration]

"Well, I hope that's all as it should be," she concluded, "for to-morrow
the Great Test in the air is due."

[Footnote 4: Morane parasol: A type of Morane monoplane in which the
lifting surfaces are raised above the pilot in order to afford him a
good view of the earth.]

[Footnote 5: Skin friction is that part of the drift due to the friction
of the air with roughness upon the surface of the aeroplane.]

[Footnote 6: Banking: When an aeroplane is turned to the left or the
right the centrifugal force of its momentum causes it to skid sideways
and outwards away from the centre of the turn. To minimize such action
the pilot banks, _i.e._, tilts, the aeroplane sideways in order to
oppose the underside of the planes to the air. The aeroplane will not
then skid outwards beyond the slight skid necessary to secure a
sufficient pressure of air to balance the centrifugal force.]

[Footnote 7: An explanation of the way in which the wash-out is combined
with a wash-in to offset propeller torque will be found on p. 82.]




PART III

THE GREAT TEST


It is five o'clock of a fine calm morning, when the Aeroplane is wheeled
out of its shed on to the greensward of the Military Aerodrome. There is
every promise of a good flying day, and, although the sun has not yet
risen, it is light enough to discern the motionless layer of fleecy
clouds some five thousand feet high, and far, far above that a few filmy
mottled streaks of vapour. Just the kind of morning beloved of pilots.

A brand new, rakish, up-to-date machine it is, of highly polished,
beautifully finished wood, fabric as tight as a drum, polished metal,
and every part so perfectly "stream-lined" to minimize drift, which is
the resistance of the air to the passage of the machine, that to the
veriest tyro the remark of the Pilot is obviously justified.

"Clean looking 'bus, looks almost alive and impatient to be off. Ought
to have a turn for speed with those lines."

"Yes," replies the Flight-Commander, "it's the latest of its type and
looks a beauty. Give it a good test. A special report is required on
this machine."

The A.M.'s[8] have now placed the Aeroplane in position facing the
gentle air that is just beginning to make itself evident; the engine
Fitter, having made sure of a sufficiency of oil and petrol in the
tanks, is standing by the Propeller; the Rigger, satisfied with a job
well done, is critically "vetting" the machine by eye; four A.M.'s are
at their posts, ready to hold the Aeroplane from jumping the blocks
which have been placed in front of the wheels; and the Flight-Sergeant
is awaiting the Pilot's orders.

As the Pilot approaches the Aeroplane the Rigger springs to attention
and reports, "All correct, sir," but the Fitter does not this morning
report the condition of the Engine, for well he knows that this pilot
always personally looks after the preliminary engine test. The latter,
in leathern kit, warm flying boots and goggled, climbs into his seat,
and now, even more than before, has the Aeroplane an almost living
appearance, as if straining to be off and away. First he moves the
Controls to see that everything is clear, for sometimes when the
Aeroplane is on the ground the control lever or "joy-stick" is lashed
fast to prevent the wind from blowing the controlling surfaces about and
possibly damaging them.

The air of this early dawn is distinctly chilly, and the A.M.'s are
beginning to stamp their cold feet upon the dewy grass, but very careful
and circumspect is the Pilot, as he mutters to himself, "Don't worry and
flurry, or you'll die in a hurry."

At last he fumbles for his safety belt, but with a start remembers the
Pitot Air Speed Indicator, and, adjusting it to zero, smiles as he
hears the Pitot-head's gruff voice, "Well, I should think so, twenty
miles an hour I was registering. That's likely to cause a green pilot
to stall the Aeroplane. Pancake, they call it." And the Pilot, who
is an old hand and has learned a lot of things in the air that mere
earth-dwellers know nothing about, distinctly heard the Pitot Tube,
whose mouth is open to the air to receive its pressure, stammer,
"Oh Lor! I've got an earwig already--hope to goodness the Rigger blows
me out when I come down--and this morning air simply fills me with
moisture; I'll never keep the Liquid steady in the Gauge. I'm not sure
of my rubber connections either."

"Oh, shut up!" cry all the Wires in unison, "haven't we got our troubles
too? We're in the most horrible state of tension. It's simply murdering
our Factor of Safety, and how we can possibly stand it when we get the
Lift only the Designer knows."

"That's all right," squeak all the little Wire loops, "we're that
accommodating, we're sure to elongate a bit and so relieve your
tension." For the whole Aeroplane is braced together with innumerable
wires, many of which are at their ends bent over in the form of loops in
order to connect with the metal fittings on the spars and elsewhere--a
cheap and easy way of making connection.

"Elongate, you little devils, would you?" fairly shout the Angles of
Incidence, Dihedral and Stagger, amid a chorus of groans from all parts
of the Aeroplane. "What's going to happen to us then? How are we going
to keep our adjustments upon which good flying depends?" "Butt us and
screw us,"[9] wail the Wires. "Butt us and screw us, and death to the
Loops. That's what we sang to the Designer, but he only looked sad and
scowled at the Directors."

"And who on earth are they?" asked the Loops, trembling for their
troublesome little lives.

"On earth indeed," sniffed Efficiency, who had not spoken before, having
been rendered rather shy by being badly compromised in the Drawing
Office. "I'd like to get some of them up between Heaven and Earth, I
would. I'd give 'em something to think of besides their Debits and
Credits--but all the same the Designer will get his way in the end. I'm
his Best Girl, you know, and if we could only get rid of the Directors,
the little Tin god, and the Man-who-takes-the-credit, we should be quite
happy."

Then she abruptly subsides, feeling that perhaps the less said the
better until she has made a reputation in the Air. The matter of that
Compromise still rankled, and indeed it does seem hardly fit that a bold
bad Tin god should flirt with Efficiency. You see there was a little Tin
god, and he said "Boom, Boom, BOOM! Nonsense! It MUST be done," and
things like that in a very loud voice, and the Designer tore his hair
and was furious, but the Directors, who were thinking of nothing but
Orders and Dividends, had the whip-hand of _him_, and so there you are,
and so poor beautiful Miss Efficiency was compromised.

All this time the Pilot is carefully buckling his belt and making
himself perfectly easy and comfortable, as all good pilots do. As he
straightens himself up from a careful inspection of the Deviation
Curve[10] of the Compass and takes command of the Controls, the Throttle
and the Ignition, the voices grow fainter and fainter until there is
nothing but a trembling of the Lift and Drift wires to indicate to his
understanding eye their state of tension in expectancy of the Great
Test.

"Petrol on?" shouts the Fitter to the Pilot.

"Petrol on," replies the Pilot.

"Ignition off?"

"Ignition off."

Round goes the Propeller, the Engine sucking in the Petrol Vapour with
satisfied gulps. And then--

"Contact?" from the Fitter.

"Contact," says the Pilot.

Now one swing of the Propeller by the Fitter, and the Engine is awake
and working. Slowly at first though, and in a weak voice demanding, "Not
too much Throttle, please. I'm very cold and mustn't run fast until my
Oil has thinned and is circulating freely. Three minutes slowly, as you
love me, Pilot."

Faster and faster turn the Engine and Propeller, and the Aeroplane,
trembling in all its parts, strains to jump the blocks and be off.
Carefully the Pilot listens to what the Engine Revolution Indicator
says. At last, "Steady at 1,500 revs. and I'll pick up the rest in the
Air." Then does he throttle down the Engine, carefully putting the lever
back to the last notch to make sure that in such position the throttle
is still sufficiently open for the Engine to continue working, as
otherwise it might lead to him "losing" his Engine in the air when
throttling down the power for descent. Then, giving the official signal,
he sees the blocks removed from the wheels, and the Flight-Sergeant
saluting he knows that all is clear to ascend. One more signal, and all
the A.M.'s run clear of the Aeroplane.

Then gently, gently mind you, with none of the "crashing on" bad Pilots
think so fine, he opens the Throttle and, the Propeller Thrust
overcoming its enemy the Drift, the Aeroplane moves forward.

"Ah!" says the Wind-screen, "that's Discipline, that is. Through my
little Triplex window I see most things, and don't I just know that poor
discipline always results in poor work in the air, and don't you forget
it."

"Discipline is it?" complains the Under-carriage, as its wheels roll
swiftly over the rather rough ground. "I'm _bump_ getting it, and _bump_,
_bump_, all I want, _bang_, _bump_, _rattle_, too!" But, as the Lift
increases with the Speed, the complaints of the Under-carriage are
stilled, and then, the friendly Lift becoming greater than the Weight,
the Aeroplane swiftly and easily takes to the air.

Below is left the Earth with all its bumps and troubles. Up into the
clean clear Air moves with incredible speed and steadiness this triumph
of the Designer, the result of how much mental effort, imagination,
trials and errors, failures and successes, and many a life lost in high
endeavour.

Now is the mighty voice of the Engine heard as he turns the Propeller
nine hundred times a minute. Now does the Thrust fight the Drift for all
it's worth, and the Air Speed Indicator gasps with delight "One hundred
miles an hour!"

And now does the burden of work fall upon the Lift and Drift Wires, and
they scream to the Turnbuckles whose business it is to hold them in
tension, "This is the limit! the Limit! THE LIMIT! Release us, if only
a quarter turn." But the Turnbuckles are locked too fast to turn their
eyes or utter a word. Only the Locking Wires thus: "Ha! ha! the Rigger
knew his job. He knew the trick, and there's no release here." For an
expert rigger will always use the locking wire in such a way as to
oppose the slightest tendency of the turnbuckle to unscrew. The other
kind of rigger will often use the wire in such a way as to allow the
turnbuckle, to the "eyes" of which the wires are attached, to unscrew a
quarter of a turn or more, with the result that the correct adjustment
of the wires may be lost; and upon their fine adjustment much depends.

And the Struts and the Spars groan in compression and pray to keep
straight, for once "out of truth" there is, in addition to possible
collapse, the certainty that in bending they will throw many wires out
of adjustment.

And the Fabric's quite mixed in its mind, and ejaculates, "Now, who
would have thought I got more Lift from the top of the Surface than its
bottom?" And then truculently to the Distance Pieces, which run from rib
to rib, "Just keep the Ribs from rolling, will you? or you'll see me
strip. I'm an Irishman, I am, and if my coat comes off---- Yes, Irish,
I said. I used to come from Egypt, but I've got naturalized since the
War began."

Then the Air Speed Indicator catches the eye of the Pilot. "Good
enough," he says as he gently deflects the Elevator and points the nose
of the Aeroplane upwards in search of the elusive Best Climbing Angle.

"Ha! ha!" shouts the Drift, growing stronger with the increased Angle of
Incidence. "Ha! ha!" he laughs to the Thrust. "Now I've got you. Now
who's Master?" And the Propeller shrieks hysterically, "Oh! look at me.
I'm a helicopter. That's not fair. Where's Efficiency?" And she can only
sadly reply, "Yes, indeed, but you see we're a Compromise."

And the Drift has hopes of reaching the Maximum Angle of Incidence
and vanquishing the Thrust and the Lift. And he grows very bold as he
strangles the Thrust; but the situation is saved by the Propeller,
who is now bravely helicopting skywards, somewhat to the chagrin of
Efficiency.

"Much ado about nothing," quotes the Aeroplane learnedly. "Compromise or
not, I'm climbing a thousand feet a minute. Ask the Altimeter. He'll
confirm it." And so indeed it was. The vacuum box of the Altimeter was
steadily expanding under the decreased pressure of the rarefied air, and
by means of its little levers and its wonderful chain no larger than a
hair it was moving the needle round the gauge and indicating the ascent
at the rate of a thousand feet a minute.

And lo! the Aeroplane has almost reached the clouds! But what's this?
A sudden gust, and down sinks one wing and up goes the other. "Oh, my
Horizontal Equivalent!" despairingly call the Planes; "it's eloping with
the Lift, and what in the name of Gravity will happen? Surely there was
enough scandal in the Factory without this, too!" For the lift varies
with the horizontal equivalent of the planes, so that if the aeroplane
tilts sideways beyond a certain angle, the lift becomes less than the
weight of the machine, which must then fall. A fall in such a position
is known as a "side-slip."

But the ever-watchful Pilot instantly depresses one aileron, elevating
the other, with just a touch of the rudder to keep on the course, and
the Planes welcome back their precious Lift as the Aeroplane flicks back
to its normal position.

"Bit bumpy here under these clouds," is all the Pilot says as he heads
for a gap between them, and the next minute the Aeroplane shoots up into
a new world of space.

"My eye!" ejaculates the Wind-screen, "talk about a view!" And indeed
mere words will always fail to express the wonder of it. Six thousand
feet up now, and look! The sun is rising quicker than ever mortal on
earth witnessed its ascent. Far below is Mother Earth, wrapt in mists
and deep blue shadows, and far above are those light, filmy, ethereal
clouds now faintly tinged with pink. And all about great mountains of
cloud, lazily floating in space. The sun rises and they take on all
colours, blending one with the other, from dazzling white to crimson
and deep violet-blue. Lakes and rivers here and there in the enormous
expanse of country below refract the level rays of the sun and, like so
many immense diamonds, send dazzling shafts of light far upwards. The
tops of the hills now laugh to the light of the sun, but the valleys are
still mysterious dark blue caverns, crowned with white filmy lace-like
streaks of vapour. And withal the increasing sense with altitude of
vast, clean, silent solitudes of space.

Lives there the man who can adequately describe this Wonder? "Never,"
says the Pilot, who has seen it many times, but to whom it is ever new
and more wonderful.

Up, up, up, and still up, unfalteringly speeds the Pilot and his mount.
Sweet the drone of the Engine and steady the Thrust as the Propeller
exultingly battles with the Drift.

And look! What is that bright silver streak all along the horizon? It
puzzled the Pilot when first he saw it, but now he knows it for the Sea,
full fifty miles away!

And on his right is the brightness of the morn and the smiling Earth
unveiling itself to the ardent rays of the Sun; and on his left, so high
is he, there is yet black night, hiding innumerable Cities, Towns,
villages, and all those places where soon teeming multitudes of men
shall awake, and by their unceasing toil and the spirit within them
produce marvels of which the Aeroplane is but the harbinger.

And the Pilot's soul is refreshed, and his vision, now exalted, sees the
Earth a very garden, even as it appears at that height, with discord
banished and a happy time come, when the Designer shall have at last
captured Efficiency, and the Man-who-takes-the-credit is he who has
earned it, and when kisses are the only things that go by favour.

Now the Pilot anxiously scans the Barograph, which is an instrument much
the same as the Altimeter; but in this case the expansion of the vacuum
box causes a pen to trace a line upon a roll of paper. This paper is
made by clockwork to pass over the point of the pen, and so a curved
line is made which accurately registers the speed of the ascent in feet
per minute. No longer is the ascent at the rate of a thousand feet a
minute, and the Propeller complains to the Engine, "I'm losing my Revs.
and the Thrust. Buck up with the Power, for the Lift is decreasing,
though the Weight remains much the same."

Quoth the Engine: "I strangle for Air. A certain proportion, and that of
right density, I must have to one part of Petrol, in order to give me
full power and compression, and here at an altitude of ten thousand feet
the Air is only two-thirds as dense as at sea-level. Oh, where is he who
will invent a contrivance to keep me supplied with air of right density
and quality? It should not be impossible within certain limits."

"We fully agree," said the dying Power and Thrust. "Only maintain Us and
you shall be surprised at the result. For our enemy Drift _decreases in
respect of distance with the increase of altitude and rarity of air_,
and there is no limit to the speed through space if only our strength
remains. And with oxygen for pilot and passengers and a steeper pitch[11]
for the Propeller we may then circle the Earth in a day!"

Ah, Reader, smile not unbelievingly, as you smiled but a few years past.
There may be greater wonders yet. Consider that as the speed increases,
so does the momentum or stored-up force in the mass of the aeroplane
become terrific. And, bearing that in mind, remember that with altitude
_gravity decreases_. There may yet be literally other worlds to
conquer.[12]

Now at fifteen thousand feet the conditions are chilly and rare, and the
Pilot, with thoughts of breakfast far below, exclaims, "High enough!
I had better get on with the Test." And then, as he depresses the
Elevator, the Aeroplane with relief assumes its normal horizontal
position. Then, almost closing the Throttle, the Thrust dies away. Now,
the nose of the Aeroplane should sink of its own volition, and the craft
glide downward at flying speed, which is in this case a hundred miles
an hour. That is what should happen if the Designer has carefully
calculated the weight of every part and arranged for the centre of
gravity to be just the right distance in front of the centre of lift.
Thus is the Aeroplane "nose-heavy" as a glider, and just so to a degree
ensuring a speed of glide equal to its flying speed. And the Air Speed
Indicator is steady at one hundred miles an hour, and "That's all
right!" exclaims the Pilot. "And very useful, too, in a fog or a cloud,"
he reflects, for then he can safely leave the angle of the glide to
itself, and give all his attention, and he will need it all, to keeping
the Aeroplane horizontal from wing-tip to wing-tip, and to keeping it
straight on its course. The latter he will manage with the rudder,
controlled by his feet, and the Compass will tell him whether a straight
course is kept. The former he will control by the ailerons, or little
wings hinged to the tips of the planes, and the bubble in the
Inclinometer in front of him must be kept in the middle.

A pilot, being only human, may be able to do two things at once, but
three is a tall order, so was this pilot relieved to find the Design not
at fault and his craft a "natural glider." To correct this nose-heavy
tendency when the Engine is running, and descent not required, the
centre of Thrust is arranged to be a little below the centre of Drift
or Resistance, and thus acts as a counter-balance.

But what is this stream of bad language from the Exhaust Pipe,
accompanied by gouts of smoke and vapour? The engine, now revolving
at no more than one-tenth its normal speed, has upset the proportion
of petrol to air, and combustion is taking place intermittently or
in the Exhaust Pipe, where it has no business to be. "Crash, Bang,
Rattle----!----!----!" and worse than that, yells the Exhaust, and the
Aeroplane, who is a gentleman and not a box kite,[13] remonstrates with
the severity of a Senior Officer. "See the Medical Officer, you young
Hun. Go and see a doctor. Vocal diarrhoea, that's your complaint, and a
very nasty one too. Bad form, bad for discipline, and a nuisance in the
Mess. What's your Regiment? Special Reserve, you say? Humph! Sounds like
Secondhand Bicycle Trade to me!"

Now the pilot decides to change the straight gliding descent to a spiral
one, and, obedient to the Rudder, the Aeroplane turns to the left. But
the Momentum (two tons at 100 miles per hour is no small affair) heavily
resents this change of direction, and tries its level best to prevent
it and to pull the machine sideways and outwards from its spiral
course--that is, to make it "side-skid" outwards. But the Pilot deflects
the Ailerons and "banks" up the planes to the correct angle, and,
the Aeroplane skidding sideways and outwards, the lower surfaces of
the planes press up against the air until the pressure equals the
centrifugal force of the Momentum, and the Aeroplane spirals steadily
downwards.

Down, down, down, and the air grows denser, and the Pilot gulps largely,
filling his lungs with the heavier air to counteract the increasing
pressure from without. Down through a gap in the clouds, and the
Aerodrome springs into view, appearing no larger than a saucer, and the
Pilot, having by now got the "feel" of the Controls, proceeds to put the
Aeroplane through its paces. First at its Maximum Angle, staggering
along tail-down and just maintaining horizontal flight; then a dive
at far over flying speed, finishing with a perfect loop; then sharp
turns with attendant vertical "banks," and then a wonderful switchback
flight, speeding down at a hundred and fifty miles an hour with short,
exhilarating ascents at the rate of two thousand feet a minute!

All the parts are now working well together. Such wires as were before
in undue tension have secured relief by slightly elongating their loops,
and each one is now doing its bit, and all are sharing the burden of
work together.

The Struts and the Spars, which felt so awkward at first, have bedded
themselves in their sockets, and are taking the compression stresses
uncomplainingly.

The Control Cables of twisted wire, a bit tight before, have slightly
lengthened by perhaps the eighth of an inch, and, the Controls instantly
responding to the delicate touch of the Pilot, the Aeroplane, at the
will of its Master, darts this way and that way, dives, loops, spirals,
and at last, in one long, magnificent glide, lands gently in front of
its shed.

"Well, what result?" calls the Flight-Commander to the Pilot.

"A hundred miles an hour and a thousand feet a minute," he briefly
replies.

"And a very good result too," says the Aeroplane, complacently, as he is
carefully wheeled into his shed.

       *       *       *       *       *

That is the way Aeroplanes speak to those who love them and understand
them. Lots of Pilots know all about it, and can spin you wonderful
yarns, much better than this one, if you catch them in a confidential
mood--on leave, for instance, and after a good dinner.

[Footnote 8: A.M.'s: Air Mechanics.]

[Footnote 9: Butt means to thicken at the end. Screw means to machine a
thread on the butt-end of the wire, and in this way the wire can make
connection with the desired place by being screwed into a metal fitting,
thus eliminating the disadvantage of the unsatisfactory loop.]

[Footnote 10: Deviation Curve: A curved line indicating any errors in the
compass.]

[Footnote 11: A propeller screws through the air, and the distance it
advances during one revolution, supposing the air to be solid, is known
as the pitch. The pitch, which depends upon the angle of the propeller
blades, must be equal to the speed of the aeroplane, plus the slip, and
if, on account of the rarity of the air, the speed of the aeroplane
increases, then the angle and pitch should be correspondingly increased.
Propellers with a pitch capable of being varied by the pilot are the
dream of propeller designers. For explanation of "slip" see Chapter IV.
on propellers.]

[Footnote 12: Getting out of my depth? Invading the realms of fancy?
Well, perhaps so, but at any rate it is possible that extraordinary
speed through space may be secured if means are found to maintain the
impulse of the engine and the thrust-drift efficiency of the propeller
at great altitude.]

[Footnote 13: Box-kite. The first crude form of biplane.]




PART IV

'CROSS COUNTRY


The Aeroplane had been designed and built, and tested in the air, and
now it stood on the Aerodrome ready for its first 'cross-country flight.

It had run the gauntlet of pseudo-designers, crank inventors, press
"experts," and politicians; of manufacturers keen on cheap work and
large profits; of poor pilots who had funked it, and good pilots who had
expected too much of it. Thousands of pounds had been wasted on it, many
had gone bankrupt over it, and others it had provided with safe fat
jobs.

Somehow, and despite every conceivable obstacle, it had managed to
muddle through, and now it was ready for its work. It was not perfect,
for there were fifty different ways in which it might be improved, some
of them shamefully obvious. But it was fairly sound mechanically, had a
little inherent stability, was easily controlled, could climb a thousand
feet a minute, and its speed was a hundred miles an hour. In short,
quite a creditable machine, though of course the right man had not got
the credit.

It is rough, unsettled weather with a thirty mile an hour wind on the
ground, and that means fifty more or less aloft. Lots of clouds at
different altitudes to bother the Pilot, and the air none too clear for
the observation of landmarks.

As the Pilot and Observer approach the Aeroplane the former is clearly
not in the best of tempers. "It's rotten luck," he is saying, "a blank
shame that I should have to take this blessed 'bus and join X Reserve
Squadron, stationed a hundred and fifty miles from anywhere; and just
as I have licked my Flight into shape. Now some slack blighter will,
I suppose, command it and get the credit of all my work!"

"Shut up, you grouser," said the Observer. "Do you think you're the only
one with troubles? Haven't I been through it too? Oh! I know all about
it! You're from the Special Reserve and your C.O. doesn't like your
style of beauty, and you won't lick his boots, and you were a bit of a
technical knut in civil life, but now you've jolly well got to know less
than those senior to you. Well! It's a very good experience for most of
us. Perhaps conceit won't be at quite such a premium after this war. And
what's the use of grousing? That never helped anyone. So buck up, old
chap. Your day will come yet. Here's our machine, and I must say it
looks a beauty!"

And, as the Pilot approaches the Aeroplane, his face brightens and he
soon forgets his troubles as he critically inspects the craft which is
to transport him and the Observer over the hills and far away. Turning
to the Flight-Sergeant he inquires, "Tanks full of petrol and oil?"

"Yes, sir," he replies, "and everything else all correct. Propeller,
engine, and body covers on board, sir; tool kit checked over and in the
locker; engine and Aeroplane logbooks written up, signed, and under your
seat; engine revs. up to mark, and all the control cables in perfect
condition and tension."

"Very good," said the Pilot; and then turning to the Observer, "Before
we start you had better have a look at the course I have mapped out
(see p. 40).

"A is where we stand and we have to reach B, a hundred and fifty miles
due North. I judge that, at the altitude we shall fly, there will be
an East wind, for although it is not quite East on the ground it is
probably about twenty degrees different aloft, the wind usually moving
round clockways to about that extent. I think that it is blowing at the
rate of about fifty miles an hour, and I therefore take a line on the
map to C, fifty miles due West of A. The Aeroplane's speed is a hundred
miles an hour, and so I take a line of one hundred miles from C to D.
Our compass course will then be in the direction A--E, which is always a
line parallel to C--D. That is, to be exact, it will be fourteen degrees
off the C--D course, as, in this part of the globe, there is that much
difference between the North and South lines on the map and the magnetic
North to which the compass needle points. If the compass has an error,
as it may have of a few degrees, that, too, must be taken into account,
and the deviation or error curve on the dashboard will indicate it.

[Illustration:
  A--B, 150 miles,
  A--C, 50 miles; direction and miles per hour of wind.
  C--D, 100 miles; airspeed of aeroplane.
  A--D, Distance covered by aeroplane in one hour.
  A--E, Compass course.]

"The Aeroplane will then always be pointing in a direction parallel to
A--E, but, owing to the side wind, it will be actually travelling over
the course A--B, though in a rather sideways attitude to that course.

"The distance we shall travel over the A--B course in one hour is A--D.
That is nearly eighty-seven miles, so we ought to accomplish our journey
of a hundred and fifty miles in about one and three-quarter hours.

"I hope that's quite clear to you. It's a very simple way of calculating
the compass course, and I always do it like that."

"Yes, that's plain enough. You have drafted what engineers call
'a parallelogram of forces'; but suppose you have miscalculated
the velocity of the wind, or that it should change in velocity or
direction?"

"Well, that of course will more or less alter matters," replies the
Pilot. "But there are any number of good landmarks such as lakes,
rivers, towns, and railway lines. They will help to keep us on the right
course, and the compass will, at any rate, prevent us from going far
astray when between them."

"Well, we'd better be off, old chap. Hop aboard." This from the Observer
as he climbs into the front seat from which he will command a good view
over the lower plane; and the Pilot takes his place in the rear seat,
and, after making himself perfectly comfortable, fixing his safety belt,
and moving the control levers to make sure that they are working freely,
he gives the signal to the Engine Fitter to turn the propeller and so
start the engine.

Round buzzes the Propeller, and the Pilot, giving the official signal,
the Aeroplane is released and rolls swiftly over the ground in the teeth
of the gusty wind.

In less than fifty yards it takes to the air and begins to climb rapidly
upwards, but how different are the conditions to the calm morning of
yesterday! If the air were visible it would be seen to be acting in the
most extraordinary manner; crazily swirling, lifting and dropping, gusts
viciously colliding--a mad phantasmagoria of forces!

Wickedly it seizes and shakes the Aeroplane; then tries to turn it over
sideways; then instantly changes its mind and in a second drops it into
a hole a hundred feet deep; and if it were not for his safety belt the
Pilot might find his seat sinking away from beneath him.

Gusts strike the front of the craft like so many slaps in the face; and
others, with the motion of mountainous waves, sometimes lift it hundreds
of feet in a few seconds, hoping to see it plunge over the summit in a
death-dive--and so it goes on, but the Pilot, perfectly at one with his
mount and instantly alert to its slightest motion, is skilfully and
naturally making perhaps fifty movements a minute of hand and feet; the
former lightly grasping the "joy-stick" which controls the Elevator
hinged to the tail, and also the Ailerons or little wings hinged to the
wing-tips; and the latter moving the Rudder control-bar.

[Illustration: The Pilot's Cock-pit.]

A strain on the Pilot? Not a bit of it, for this is his Work which he
loves and excels in; and given a cool head, alert eye, and a sensitive
touch for the controls, what sport can compare with these ever-changing
battles of the air?

The Aeroplane has all this time been climbing in great wide circles, and
is now some three thousand feet above the Aerodrome which from such
height looks absurdly small. The buildings below now seem quite squat;
the hills appear to have sunk away into the ground, and the whole
country below, cut up into diminutive fields, has the appearance of
having been lately tidied and thoroughly spring-cleaned! A doll's
country it looks, with tiny horses and cows ornamenting the fields
and little model motor-cars and carts stuck on the roads, the latter
stretching away across country like ribbons accidentally dropped.

At three thousand feet altitude the Pilot is satisfied that he is
now sufficiently high to secure, in the event of engine failure,
a long enough glide to earth to enable him to choose and reach a good
landing-place; and, being furthermore content with the steady running of
the engine, he decides to climb no more but to follow the course he has
mapped out. Consulting the compass, he places the Aeroplane on the A--E
course and, using the Elevator, he gives his craft its minimum angle of
incidence at which it will just maintain horizontal flight and secure
its maximum speed.

Swiftly he speeds away, and few thoughts he has now for the changing
panorama of country, cloud, and colour. Ever present in his mind are the
three great 'cross-country queries. "Am I on my right course? Can I see
a good landing-ground within gliding distance?" And "How is the Engine
running?"

Keenly both he and the Observer compare their maps with the country
below. The roads, khaki-coloured ribbons, are easily seen but are not
of much use, for there are so many of them and they all look alike from
such an altitude.

Now where can that lake be which the map shows so plainly? He feels that
surely he should see it by now, and has an uncomfortable feeling that
he is flying too far West. What pilot is there indeed who has not many
times experienced such unpleasant sensation? Few things in the air can
create greater anxiety. Wisely, however, he sticks to his compass
course, and the next minute he is rewarded by a sight of the lake,
though indeed he now sees that the direction of his travel will not take
him over it, as should be the case if he were flying over the shortest
route to his destination. He must have slightly miscalculated the
velocity or direction of the side-wind.

"About ten degrees off," he mutters, and, using the Rudder, corrects his
course accordingly.

Now he feels happier and that he is well on his way. The gusts, too,
have ceased to trouble him as, at this altitude, they are not nearly so
bad as they were near the ground, the broken surface of which does much
to produce them; and sometimes for miles he makes but a movement or two
of the controls.

The clouds just above race by with dizzy and uniform speed; the country
below slowly unrolls, and the steady drone of the Engine is almost
hypnotic in effect. "Sleep, sleep, sleep," it insidiously suggests.
"Listen to me and watch the clouds; there's nothing else to do. Dream,
dream, dream of speeding through space for ever, and ever, and ever; and
rest, rest, rest to the sound of my rhythmical hum. Droning on and on,
nothing whatever matters. All things now are merged into speed through
space and a sleepy monotonous d-d-r-r-o-o-n-n-e------." But the Pilot
pulls himself together with a start and peers far ahead in search of the
next landmark. This time it is a little country town, red-roofed his map
tells him, and roughly of cruciform shape; and, sure enough, there in
the right direction are the broken outlines of a few red roofs peeping
out from between the trees.

Another minute and he can see this little town, a fairy place it
appears, nestling down between the hills and its red roofs and
picturesque shape, a glowing and lovely contrast with the dark green
of the surrounding moors.

So extraordinarily clean and tidy it looks from such a height, and laid
out in such orderly fashion with perfectly defined squares, parks,
avenues, and public buildings, it indeed appears hardly real, but rather
as if it has this very day materialized from some delightful children's
book!

Every city and town you must know has its distinct individuality to the
Pilot's eye. Some are not fairy places at all, but great dark ugly blots
upon the fair countryside, and with tall shafts belching forth murky
columns of smoke to defile clean space. Others, melancholy-looking
masses of grey, slate-roofed houses, are always sad and dispirited;
never welcoming the glad sunshine, but ever calling for leaden skies and
a weeping Heaven. Others again, little coquettes with village green,
white palings everywhere, bright gravel roads, and an irrepressible air
of brightness and gaiety.

Then there are the rivers, silvery streaks peacefully winding far, far
away to the distant horizon; they and the lakes the finest landmarks the
Pilot can have. And the forests. How can I describe them? The trees
cannot be seen separately, but merge altogether into enormous irregular
dark green masses sprawling over the country, and sometimes with great
ungainly arms half encircling some town or village; and the wind passing
over the foliage at times gives the forest an almost living appearance,
as of some great dragon of olden times rousing itself from slumber to
devour the peaceful villages its arms encircle.

And the Pilot and Observer fly on and on, seeing these things and many
others which baffle my poor skill to describe--things, dear Reader, that
you shall see, and poets sing of, and great artists paint in the days to
come when the Designer has captured Efficiency. Then, and the time is
near, shall you see this beautiful world as you have never seen it
before, the garden it is, the peace it breathes, and the wonder of it.

The Pilot, flying on, is now anxiously looking for the railway line
which midway on his journey should point the course. Ah! There it
is at last, but suddenly (and the map at fault) it plunges into the
earth! Well the writer remembers when that happened to him on a long
'cross-country flight in the early days of aviation. Anxiously he
wondered "Are tunnels always straight?" and with what relief, keeping
on a straight course, he picked up the line again some three miles
farther on!

Now at last the Pilot sees the sea, just a streak on the north-eastern
horizon, and he knows that his flight is two-thirds over. Indeed, he
should have seen it before, but the air is none too clear, and he is not
yet able to discern the river which soon should cross his path. As he
swiftly speeds on the air becomes denser and denser with what he fears
must be the beginning of a sea-fog, perhaps drifting inland along the
course of the river. Now does he feel real anxiety, for it is the _duty_
of a Pilot to fear fog, his deadliest enemy. Fog not only hides the
landmarks by which he keeps his course, but makes the control of the
Aeroplane a matter of the greatest difficulty. He may not realize it,
but, in keeping his machine on an even keel, he is unconsciously
balancing it against the horizon, and with the horizon gone he is lost
indeed. Not only that, but it also prevents him from choosing his
landing-place, and the chances are that, landing in a fog, he will smash
into a tree, hedge, or building, with disastrous results. The best and
boldest pilot 'wares a fog, and so this one, finding the conditions
becoming worse and yet worse, and being forced to descend lower and
lower in order to keep the earth within view, wisely decides to choose
a landing-place while there is yet time to do so.

Throttling down the power of the engine he spirals downwards, keenly
observing the country below. There are plenty of green fields to lure
him, and his great object is to avoid one in which the grass is long,
for that would bring his machine to a stop so suddenly as to turn it
over; or one of rough surface likely to break the under-carriage. Now is
perfect eyesight and a cool head indispensable. He sees and decides upon
a field and, knowing his job, he sticks to that field with no change of
mind to confuse him. It is none too large, and gliding just over the
trees and head on to the wind he skilfully "stalls" his machine; that
is, the speed having decreased sufficiently to avoid such a manoeuvre
resulting in ascent, he, by means of the Elevator, gives the Aeroplane
as large an angle of incidence as possible, and the undersides of the
planes meeting the air at such a large angle act as an air-brake, and
the Aeroplane, skimming over the ground, lessens its speed and finally
stops just at the farther end of the field.

Then, after driving the Aeroplane up to and under the lee of the hedge,
he stops the engine, and quickly lashing the joy-stick fast in order
to prevent the wind from blowing the controlling surfaces about and
possibly damaging them, he hurriedly alights. Now running to the tail
he lifts it up on to his shoulder, for the wind has become rough indeed
and there is danger of the Aeroplane becoming unmanageable. By this
action he decreases the angle at which the planes are inclined to
the wind and so minimizes the latter's effect upon them. Then to the
Observer, "Hurry up, old fellow, and try to find some rope, wire,
or anything with which to picket the machine. The wind is rising and
I shan't be able to hold the 'bus steady for long. Don't forget the
wire-cutters. They're in the tool kit." And the Observer rushes off in
frantic haste, before long triumphantly returning with a long length of
wire from a neighbouring fence. Blocking up the tail with some debris at
hand, they soon succeed, with the aid of the wire, in stoutly picketing
the Aeroplane to the roots of the high hedge in front of it; done with
much care, too, so that the wire shall not fray the fabric or set up
dangerous bending-stresses in the woodwork. Their work is not done yet,
for the Observer remarking, "I don't like the look of this thick weather
and rather fear a heavy rain-storm," the Pilot replies, "Well, it's
a fearful bore, but the first rule of our game is never to take an
unnecessary risk, so out with the engine and body covers."

Working with a will they soon have the engine and the open part of the
body which contains the seats, controls, and instruments snugly housed
with their waterproof covers, and the Aeroplane is ready to weather the
possible storm. Says the Observer, "I'm remarkably peckish, and methinks
I spy the towers of one of England's stately homes showing themselves
just beyond that wood, less than a quarter of a mile away. What ho! for
a raid. What do you say?"

"All right, you cut along and I'll stop here, for the Aeroplane must not
be left alone. Get back as quickly as possible."

And the Observer trots off, leaving the Pilot filling his pipe and
anxiously scrutinizing the weather conditions. Very thick it is now, but
the day is yet young, and he has hopes of the fog lifting sufficiently
to enable the flight to be resumed. A little impatiently he awaits the
return of his comrade, but with never a doubt of the result, for the
hospitality of the country house is proverbial among pilots! What old
hand among them is there who cannot instance many a forced landing made
pleasant by such hospitality? Never too late or too early to help with
food, petrol, oil, tools, and assistants. Many a grateful thought has
the writer for such kind help given in the days before the war (how long
ago they seem!), when aeroplanes were still more imperfect than they are
now, and involuntary descents often a part of 'cross-country flying.

Ah! those early days! How fresh and inspiring they were! As one started
off on one's first 'cross-country flight, on a machine the first of its
design, and with everything yet to learn, and the wonders of the air yet
to explore; then the joy of accomplishment, the dreams of Efficiency,
the hard work and long hours better than leisure; and what a field of
endeavour--the realms of space to conquer! And the battle still goes on
with ever-increasing success. Who is bold enough to say what its limits
shall be?

So ruminates this Pilot-Designer, as he puffs at his pipe, until his
reverie is abruptly disturbed by the return of the Observer.

"Wake up, you _airman_," the latter shouts. "Here's the very thing the
doctor ordered! A basket of first-class grub and something to keep the
fog out, too."

"Well, that's splendid, but don't call me newspaper names or you'll
spoil my appetite!"

Then, with hunger such as only flying can produce, they appreciatively
discuss their lunch, and with many a grateful thought for the
donors--and they talk shop. They can't help it, and even golf is a poor
second to flight talk. Says the Pilot, who must have his grievance,
"Just observe where I managed to stop the machine. Not twenty feet from
this hedge! A little more and we should have been through it and into
Kingdom Come! I stalled as well as one could, but the tail touched the
ground and so I could not give the Aeroplane any larger angle of
incidence. Could I have given it a larger angle, then the planes would
have become a much more effective air-brake, and we should have come to
rest in a much shorter distance. It's all the fault of the tail. There's
hardly a type of Aeroplane in existence in which the tail could not be
raised several feet, and that would make all the difference. A high tail
means a large angle of incidence when the machine touches ground and,
with enough angle, I'll guarantee to safely land the fastest machine in
a five-acre field. You can, I am sure, imagine what a difference that
would make where forced landings are concerned!" Then rapidly sketching
in his notebook, he shows the Observer the following illustration:

[Illustration:
  The Pilot's Aeroplane.
  The Change of Design He Would Like.]

"That's very pretty," said the Observer, "but how about Mechanical
Difficulties, and Efficiency in respect of Flight? And, anyway, why
hasn't such an obvious thing been done already?"

"As regards the first part of your question I assure you that there's
nothing in it, and I'll prove it to you as follows----"

"Oh! That's all right, old chap. I'll take your word for it," hurriedly
replies the Observer, whose soul isn't tuned to a technical key.

"As regards the latter part of your inquiry," went on the Pilot, a
little nettled at having such a poor listener, "it's very simple.
Aeroplanes have 'just growed' like Topsy, and they consequently contain
this and many another relic of early day design when Aeroplanes were
more or less thrown together and anything was good enough that could
get off the ground."

"By Jove," interrupts the Observer, "I do believe the fog is lifting.
Hadn't we better get the engine and body covers off, just in case it's
really so?"

"I believe you're right. I am sure those hills over there could not be
seen a few minutes ago, and look--there's sunshine over there. We'd
better hurry up."

Ten minutes' hard work and the covers are off, neatly folded and stowed
aboard; the picketing wires are cast adrift, and the Pilot is once more
in his seat. The Aeroplane has been turned to face the other end of the
field, and, the Observer swinging round the propeller, the engine is
awake again and slowly ticking over. Quickly the Observer climbs into
his seat in front of the Pilot, and, the latter slightly opening the
throttle, the Aeroplane leisurely rolls over the ground towards the
other end of the field, from which the ascent will be made.

Arriving there the Pilot turns the Aeroplane in order to face the wind
and thus secure a quick "get-off." Then he opens the throttle fully and
the mighty voice of the Engine roars out "Now see me clear that hedge!"
and the Aeroplane races forward at its minimum angle of incidence. Tail
up, and with ever-increasing speed, it rushes towards the hedge under
the lee of which it has lately been at rest; and then, just as the
Observer involuntarily pulls back an imaginary joy-stick, the Pilot
moves the real one and places the machine at its best climbing angle.
Like a living thing it responds, and instantly leaves the ground,
clearing the hedge like a--well, like an Aeroplane with an excellent
margin of lift. Upwards it climbs with even and powerful lift, and the
familiar scenes below again gladden the eyes of the Pilot. Smaller and
more and more squat grow the houses and hills; more and more doll-like
appear the fields which are clearly outlined by the hedges; and soon the
country below is easily identified with the map. Now they can see the
river before them and a bay of the sea which must be crossed or skirted.
The fog still lingers along the course of the river and between the
hills, but is fast rolling away in grey, ghost-like masses. Out to sea
it obscures the horizon, making it difficult to be sure where water ends
and fog begins, and creating a strange, rather weird, effect by which
ships at a certain distance appear to be floating in space.

Now the Aeroplane is almost over the river, and the next instant it
suddenly drops into a "hole in the air." With great suddenness it
happens, and for some two hundred feet it drops nose-down and tilted
over sideways; but the Pilot is prepared and has put his craft on an
even keel in less time than it takes to tell you about it; for well he
knows that he must expect such conditions when passing over a shore or,
indeed, any well-defined change in the composition of the earth's
surface. Especially is this so on a hot and sunny day, for then the warm
surface of the earth creates columns of ascending air, the speed of the
ascent depending upon the composition of the surface. Sandy soil, for
instance, such as borders this river produces a quickly ascending column
of air, whereas water and forests have not such a marked effect. Thus,
when our Aeroplane passed over the shore of the river, it suddenly lost
the lift due to the ascending air produced by the warm sandy soil, and
it consequently dropped just as if it had fallen into a hole.

Now the Aeroplane is over the bay and, the sea being calm, the Pilot
looks down, down through the water, and clearly sees the bottom,
hundreds of feet below the surface. Down through the reflection of the
blue sky and clouds, and one might think that is all, but it isn't. Only
those who fly know the beauties of the sea as viewed from above; its
dappled pearly tints; its soft dark blue shadows; the beautiful
contrasts of unusual shades of colour which are always differing and
shifting with the changing sunshine and the ever moving position of the
aerial observer. Ah! for some better pen than mine to describe these
things! One with glowing words and a magic rhythm to express the wonders
of the air and the beauty of the garden beneath--the immensity of the
sea--the sense of space and of one's littleness there--the realization
of the Power moving the multitudes below--the exaltation of spirit
altitude produces--the joy of speed. A new world of sensation!

Now the bay is almost crossed and the Aerodrome at B. can be
distinguished....

       *       *       *       *       *

On the Aerodrome is a little crowd waiting and watching for the arrival
of the Aeroplane, for it is of a new and improved type and its first
'cross-country performance is of keen interest to these men; men who
really know something about flight.

There is the Squadron Commander who has done some real flying in his
time; several well-seasoned Flight-Commanders; a dozen or more
Flight-Lieutenants; a knowledgeable Flight-Sergeant; a number of Air
Mechanics, and, a little on one side and almost unnoticed, the Designer.

"I hope they are all right," says someone, "and that they haven't had
difficulties with the fog. It rolled up very quickly, you know."

"Never fear," remarks a Flight-Commander. "I know the Pilot well and
he's a good 'un; far too good to carry on into a fog."

"They say the machine is really something out of the ordinary," says
another, "and that, for once, the Designer has been allowed full play;
that he hasn't been forced to unduly standardize ribs, spars, struts,
etc., and has more or less had his own way. I wonder who he is. It seems
strange we hear so little of him."

"Ah! my boy. You do a bit more flying and you'll discover that things
are not always as they appear from a distance!"

"There she is, sir!" cries the Flight-Sergeant. "Just a speck over the
silvery corner of that cloud."

A tiny speck it looks, some six miles distant and three thousand feet
high; but, racing along, it rapidly appears larger and soon its outlines
can be traced and the sunlight be seen playing upon the whirling
propeller.

Now the distant drone of the engine can be heard, but not for long, for
suddenly it ceases and, the nose of the Aeroplane sinking, the craft
commences gliding downwards.

"Surely too far away," says a subaltern. "It will be a wonderful machine
if, from that distance and height, it can glide into the Aerodrome."
And more than one express the opinion that it cannot be done; but
the Designer smiles to himself, yet with a little anxiety, for his
reputation is at stake, and Efficiency, the main reward he desires,
is perhaps, or perhaps not, at last within his grasp!

Swiftly the machine glides downwards towards them, and it can now be
seen how surprisingly little it is affected by the rough weather and
gusts; so much so that a little chorus of approval is heard.

"Jolly good gliding angle," says someone; and another, "Beautifully
quick controls, what?" and from yet another, "By Jove! The Pilot must be
sure of the machine. Look, he's stopped the engine entirely."

Then the Aeroplane with noiseless engine glides over the boundary of the
Aerodrome, and, with just a soft soughing sound from the air it cleaves,
lands gently not fifty yards from the onlookers.

"Glad to see you," says the Squadron Commander to the Pilot. "How do you
like the machine?" And the Pilot replies:

"I never want a better one, sir. It almost flies itself!"

And the Designer turns his face homewards and towards his beloved
drawing-office; well satisfied, but still dreaming dreams of the future
and ... looking far ahead who should he see but Efficiency at last
coming towards him! And to him she is all things. In her hair is the
morning sunshine; her eyes hold the blue of the sky, and on her cheeks
is the pearly tint of the clouds as seen from above. The passion of
speed, the lure of space, the sense of power, and the wonder of the
future ... all these things she holds for him.

"Ah!" he cries. "You'll never leave me now, when at last there is no one
between us?"

And Efficiency, smiling and blushing, but practical as ever, says:

"And you will never throw those Compromises in my face?"

"My dear, I love you for them! Haven't they been my life ever since I
began striving for you ten long years ago?"

And so they walk off very happily, arm-in-arm together; and if this
hasn't bored you and you'd like some more of the same sort of thing, I'd
just love to tell you some day of the wonderful things they accomplish
together, and of what they dream the future holds in store.

[Illustration]

_And that's the end of the Prologue._




CHAPTER I

FLIGHT


Air has weight (about 13 cubic feet = 1 lb.), inertia, and momentum.
It therefore obeys Newton's laws[14] and resists movement. It is that
resistance or reaction which makes flight possible.

Flight is secured by driving through the air a surface[15] inclined
upwards and towards the direction of motion.

[Illustration]

S = Side view of surface.

M = Direction of motion.

CHORD.--The Chord is, for practical purposes, taken to be a straight
line from the leading edge of the surface to its trailing edge.

N = A line through the surface starting from its trailing edge. The
position of this line, which I call the _Neutral Lift Line_, is found
by means of wind-tunnel research, and it varies with differences in
the camber (curvature) of surfaces. In order to secure flight, the
inclination of the surface must be such that the neutral lift line makes
an angle with and _above_ the line of motion. If it is coincident with
M, there is no lift. If it makes an angle with M and _below_ it, then
there is a pressure tending to force the surface down.

I = Angle of Incidence. This angle is generally defined as the angle the
chord makes with the direction of motion, but that is a bad definition,
as it leads to misconception. The angle of incidence is best described
as the angle the neutral lift line makes with the direction of motion
relative to the air. You will, however, find that in nearly all rigging
specifications the angle of incidence is taken to mean the angle the
chord makes with a line parallel to the propeller thrust. This is
necessary from the point of view of the practical mechanic who has to
rig the aeroplane, for he could not find the neutral lift line, whereas
he can easily find the chord. Again, he would certainly be in doubt as
to "the direction of motion relative to the air," whereas he can easily
find a line parallel to the propeller thrust. It is a pity, however,
that these practical considerations have resulted in a bad definition of
the angle of incidence becoming prevalent, a consequence of which has
been the widespread fallacy that flight may be secured with a negative
inclination of the surface. Flight may conceivably be secured with a
negative angle of chord, but never with a negative inclination of the
surface, if, as seems reasonable, we regard the surface from the point
of view of the neutral lift line. All this is only applicable to
cambered surfaces. In the case of flat surfaces the neutral lift line
coincides with the chord and the definition I have criticized adversely
is then applicable. Flat lifting surfaces are, however, never used.

The surface acts upon the air in the following manner:

[Illustration]

As the bottom of the surface meets the air, it compresses it and
accelerates it _downwards_. As a result of this definite action there
is, of course, an equal and opposite reaction _upwards_.

The top surface, in moving forward, tends to leave the air behind
it, thus creating a semi-vacuum or rarefied area over the top of the
surface. Consequently the pressure of air on the top of the surface
is decreased, thus assisting the reaction below to lift the surface
_upwards_.

The reaction increases approximately as the square of the velocity. It
is the result of (1) the mass of air engaged, and (2) the velocity and
consequent force with which the surface engages the air. If the reaction
was produced by only one of those factors it would increase in direct
proportion to the velocity, but, since it is the product of both
factors, it increases as V^2.

Approximately three-fifths of the reaction is due to the decrease of
density (and consequent decrease of downward pressure) on the top of the
surface; and only some two-fifths is due to the upward reaction secured
by the action of the bottom surface upon the air. A practical point in
respect of this is that, in the event of the fabric covering the surface
getting into bad condition, it is more likely to strip off the top than
off the bottom.

[Illustration]

The direction of the reaction is, at efficient angles of incidence,
approximately at right-angles to the neutral lift line of the surface,
as illustrated above; and it is, in considering flight, convenient to
divide it into two component parts or values, thus:

1. The vertical component of the reaction, _i.e._, Lift, which is
opposed to Gravity, _i.e._, the weight of the aeroplane.

2. The horizontal component, _i.e._, Drift (sometimes called
Resistance), to which is opposed the thrust of the propeller.

The direction of the reaction is, of course, the resultant of the forces
Lift and Drift. The Lift is the useful part of the reaction, for it
lifts the weight of the aeroplane.

The Drift is the villain of the piece, and must be overcome by the
Thrust in order to secure the necessary velocity to produce the
requisite lift for flight.

DRIFT.--The drift of the whole aeroplane (we have considered only the
lifting surface heretofore) may be conveniently divided into three
parts, as follows:

_Active Drift_, which, is the drift produced by the lifting surfaces.

_Passive Drift_, which is the drift produced by all the rest of the
aeroplane--the struts, wires, fuselage, under-carriage, etc., all of
which is known as "detrimental surface."

_Skin Friction_, which is the drift produced by the friction of the
air with roughness of surface. The latter is practically negligible
having regard to the smooth surface of the modern aeroplane, and its
comparatively slow velocity compared with, for instance, the velocity
of a propeller blade.

LIFT-DRIFT RATIO.--The proportion of lift to drift is known as the
lift-drift ratio, and is of paramount importance, for it expresses _the
efficiency of the aeroplane_ (as distinct from engine and propeller).
A knowledge of the factors governing the lift-drift ratio is, as will
be seen later, _an absolute necessity_ to anyone responsible for the
rigging of an aeroplane, and the maintenance of it in an efficient and
safe condition.

Those factors are as follows:

1. _Velocity_.--The greater the velocity the greater the proportion of
drift to lift, and consequently the less the efficiency. Considering the
lifting surfaces alone, both the lift and the (active) drift, being
component parts of the reaction, increase as the square of the velocity,
and the efficiency remains the same at all speeds. But, considering the
whole aeroplane, we must remember the passive drift. It also increases
as the square of the velocity (with no attendant lift), and, adding
itself to the active drift, results in increasing the proportion of
total drift (active + passive) to lift.

But for the increase in passive drift the efficiency of the aeroplane
would not fall with increasing velocity, and it would be possible, by
doubling the thrust, to approximately double the speed or lift--a happy
state of affairs which can never be, but which we may, in a measure,
approach by doing everything possible to diminish the passive drift.

Every effort is then made to decrease it by "stream-lining," _i.e._, by
giving all "detrimental" parts of the aeroplane a form by which they
will pass through the air with the least possible drift. Even the wires
bracing the aeroplane together are, in many cases, stream-lined, and
with a markedly good effect upon the lift-drift ratio. In the case of a
certain well-known type of aeroplane the replacing of the ordinary wires
by stream-lined wires added over five miles an hour to the flight speed.

[Illustration]

_Head-resistance_ is a term often applied to passive drift, but it is
apt to convey a wrong impression, as the drift is not nearly so much the
result of the head or forward part of struts, wires, etc., as it is of
the rarefied area behind.

Above is illustrated the flow of air round two objects moving in the
direction of the arrow M.

In the case of A, you will note that the rarefied area DD is of very
considerable extent; whereas in the case of B, the air flows round it
in such a way as to meet very closely to the rear of the object, thus
_decreasing_ DD.

The greater the rarefied area DD, then, the less the density, and,
consequently, the less the pressure of air upon the rear of the object.
The less such pressure, then, the better is head-resistance D able to
get its work in, and the more thrust will be required to overcome it.

The "fineness" of the stream-line shape, _i.e._, the proportion of
length to width, is determined by the velocity--the greater the
velocity, the greater the fineness. The best degree of fineness for any
given velocity is found by means of wind-tunnel research.

The practical application of all this is, from a rigging point of view,
the importance of adjusting all stream-line parts to be dead-on in the
line of flight, but more of that later on.

2. _Angle of Incidence_.--The most efficient angle of incidence varies
with the thrust at the disposal of the designer, the weight to be
carried, and the climb-velocity ratio desired.

The best angles of incidence for these varying factors are found by
means of wind-tunnel research and practical trial and error. Generally
speaking, the greater the velocity the smaller should be the angle of
incidence, in order to preserve a clean, stream-line shape of rarefied
area and freedom from eddies. Should the angle be too great for the
velocity, then the rarefied area over the top of the surface becomes of
irregular shape with attendant turbulent eddies. Such eddies possess no
lift value, and since it has taken power to produce them, they represent
drift and adversely affect the lift-drift ratio. Also, too great an
angle for the velocity will result in the underside of the surface
tending to compress the air against which it is driven rather than
accelerate it _downwards_, and that will tend to produce drift rather
than the _upwards_ reaction, or lift.

From a rigging point of view, one must presume that every standard
aeroplane has its lifting surface set at the most efficient angle, and
the practical application of all this is in taking the greatest possible
care to rig the surface at the correct angle and to maintain it at such
angle. Any deviation will adversely affect the lift-drift ratio, _i.e._,
the efficiency.

3. _Camber_.--(Refer to the second illustration in this chapter.) The
lifting surfaces are cambered, _i.e._, curved, in order to decrease the
horizontal component of the reaction, _i.e._, the drift.

_The bottom camber_: If the bottom of the surface was flat, every
particle of air meeting it would do so with a shock, and such shock
would produce a very considerable horizontal reaction or drift. By
curving it such shock is diminished, and the curve should be such
as to produce a uniform (not necessarily constant) acceleration and
compression of the air from the leading edge to the trailing edge.
Any unevenness in the acceleration and compression of the air produces
drift.

_The top camber_: If this was flat it would produce a rarefied area of
irregular shape. I have already explained the bad effect this has upon
the lift-drift ratio. The top surface is then curved to produce a
rarefied area the shape of which shall be as stream-line and free from
attendant eddies as possible.

The camber varies with the angle of incidence, the velocity, and the
thickness of the surface. Generally speaking, the greater the velocity,
the less the camber and angle of incidence. With infinite velocity the
surface would be set at no angle of incidence (the neutral lift line
coincident with the direction of motion relative to the air), and would
be, top and bottom, of pure stream-line form--_i.e._, of infinite
fineness. This is, of course, carrying theory to absurdity as the
surface would then cease to exist.

The best cambers for varying velocities, angles of incidence, and
thickness of surface, are found by means of wind-tunnel research. The
practical application of all this is in taking the greatest care to
prevent the surface from becoming distorted and thus spoiling the camber
and consequently the lift-drift ratio.

4. _Aspect Ratio_.--This is the proportion of span to chord. Thus, if
the span is, for instance, 50 feet and the chord 5 feet, the surface
would be said to have an aspect ratio of 10 to 1.

For _a given velocity_ and _a given area_ of surface, the higher the
aspect ratio, the greater the reaction. It is obvious, I think, that the
greater the span, the greater the mass of undisturbed air engaged, and,
as already explained, the reaction is partly the result of the mass of
air engaged. I say "undisturbed" advisedly, for otherwise it might be
argued that, whatever the shape of the surface, the same mass of air
would be engaged. The word "undisturbed" makes all the difference, for
it must be remembered that the rear part of the underside of the surface
engages air most of which has been deflected downwards by the surface
in front of it. That being so, the rear part of the surface has not the
same opportunity of forcing; the air downwards (since it is already
flowing downwards) and securing there from an upwards, reaction as has
the surface in front of it. It is therefore of less value for its area
than the front part of the surface, since it does less work and secures
less reaction--_i.e._, lift. Again, the rarefied area over the top of
the surface is most rare towards the front of it, as, owing to eddies,
the rear of such area tends to become denser.

[Illustration]

Thus, you see, the front part of the surface is the most valuable from
the point of view of securing an upwards reaction from the air; and so,
by increasing the proportion of front, or "span," to chord, we increase
the amount of reaction for a given velocity and area of surface. That
means a better proportion of reaction to weight of surface, though the
designer must not forget the drift of struts and wires necessary to
brace up a surface of high aspect ratio.

Not only that, but, _provided_ the chord is not decreased to an extent
making it impossible to secure the best camber owing to the thickness
of the surface, the higher the aspect ratio, the better the lift-drift
ratio. The reason of this is rather obscure. It is sometimes advanced
that it is owing to the "spill" of air from under the wing-tips. With
a high aspect ratio the chord is less than would otherwise be the case.
Less chord results in smaller wing-tips and consequently less "spill."
This, however, appears to be a rather inadequate reason for the high
aspect ratio producing the high lift-drift ratio. Other reasons are also
advanced, but they are of such a contentious nature I do not think it
well to go into them here. They are of interest to designers, but this
is written for the practical pilot and rigger.

5. _Stagger_.--This is the advancement of the top surface relative
to the bottom surface, and is not, of course, applicable to a single
surface, _i.e._, a monoplane. In the case of a biplane having no
stagger, there will be "interference" and consequent loss of efficiency
unless the gap between the top and bottom surfaces is equal to not less
than about 1-1/2 times the chord. If less than that, the air engaged by
the bottom of the top surface will have a tendency to be drawn into the
rarefied area over the top of the bottom surface, with the result that
the surfaces will not secure as good a reaction as would otherwise be
the case.

It is not practicable to have a gap of much more than a distance equal
to the chord, owing to the drift produced by the great length of struts
and wires such a large gap would necessitate. By staggering the top
surface forward, however, it is removed from the action of the lower
surface and engages undisturbed air, with the result that the efficiency
can in this way be increased by about 5 per cent. Theoretically the
top plane should be staggered forward for a distance equal to about 30
per cent. of the chord, the exact distance depending upon the velocity
and angle of incidence; but this is not always possible to arrange
in designing an aeroplane, owing to difficulties of balance, desired
position, and view of pilot, observer, etc.

[Illustration: H.E., Horizontal equivalent. D., Dihedral angle.]

6. _Horizontal Equivalent._-The vertical component of the reaction,
_i.e._, lift, varies as the horizontal equivalent (H.E.) of the surface,
but the drift remains the same. Then it follows that if H.E. grows less,
the ratio of lift to drift must do the same.

A, B, and C are front views of three surfaces.

A has its full H.E., and therefore, from the point of view from which we
are at the moment considering efficiency, it has its best lift-drift
ratio.

B and C both possess the same surface as A, but one is inclined upwards
from its centre and the other is straight but tilted. For these reasons
their H.E.'s are, as illustrated, less than in the case of A, That means
less vertical lift, and, the drift remaining the same (for there is the
same amount of surface as in A to produce it), the lift-drift ratio
falls.

THE MARGIN OF POWER is the power available above that necessary to
maintain horizontal flight.

THE MARGIN OF LIFT is the height an aeroplane can gain in a given time
and starting from a given altitude. As an example, thus: 1,000 feet the
first minute, and starting from an altitude of 500 feet above sea-level.

The margin of lift decreases with altitude, owing to the decrease in the
density of the air, which adversely affects the engine. Provided the
engine maintained its impulse with altitude, then, if we ignore the
problem of the propeller, which I will go into later on, the margin of
lift would not disappear. Moreover, greater velocity for a given power
would be secured at a greater altitude, owing to the decreased density
of air to be overcome. After reading that you may like to light your
pipe and indulge in dreams of the wonderful possibilities which may
become realities if some brilliant genius shows us some day how to
secure a constant power with increasing altitude. I am afraid, however,
that will always remain impossible; but it is probable that some very
interesting steps may be taken in that direction.

THE MINIMUM ANGLE OF INCIDENCE is the smallest angle at which, for
a given power, surface (including detrimental surface), and weight,
horizontal flight can be maintained.

THE MAXIMUM ANGLE OF INCIDENCE is the greatest angle at which, for
a given power, surface (including detrimental surface), and weight,
horizontal flight can be maintained.

THE OPTIMUM ANGLE OF INCIDENCE is the angle at which the lift-drift
ratio is highest. In modern aeroplanes it is that angle of incidence
possessed by the surface when the axis of the propeller is horizontal.

THE BEST CLIMBING ANGLE is approximately half-way between the maximum
and the optimum angles.

All present-day aeroplanes are a compromise between Climb and horizontal
Velocity. We will compare the essentials for two aeroplanes, one
designed for maximum climb, and the other for maximum velocity.


ESSENTIALS FOR MAXIMUM CLIMB:

1. _Low velocity_, in order to secure the best lift-drift ratio.

2. Having a low velocity, _a large surface_ will be necessary in order
to engage the necessary mass of air to secure the requisite lift.

[Illustration]

3. Since (1) such a climbing machine will move along an upward sloping
path, and (2) will climb with its propeller thrust horizontal, then a
_large angle relative to the direction of the thrust_ will be necessary
in order to secure the requisite angle relative to the direction of
motion.

The propeller thrust should be always horizontal, because the most
efficient flying-machine (having regard to climb or velocity) has, so
far, been found to be an arrangement of an inclined surface driven by
a _horizontal_ thrust--the surface lifting the weight, and the thrust
overcoming the drift. This is, in practice, a far more efficient
arrangement than the helicopter, _i.e._, the air-screw revolving about
a vertical axis and producing a thrust opposed to gravity. If, when
climbing, the propeller thrust is at such an angle as to tend to haul
the aeroplane upwards, then it is, in a measure, acting as a helicopter,
and that means inefficiency. The reason of a helicopter being
inefficient in practice is due to the fact that, owing to mechanical
difficulties, it is impossible to construct within a reasonable weight
an air-screw of the requisite dimensions. That being so, it would be
necessary, in order to absorb the power of the engine, to revolve the
comparatively small-surfaced air screw at an immensely greater velocity
than that of the aeroplane's surface. As already explained, the
lift-drift ratio falls with velocity on account of the increase in
passive drift. This applies to a blade of a propeller or air-screw which
is nothing but a revolving surface set at angle of incidence, and which
it is impossible to construct without a good deal of detrimental surface
near the central boss.

4. The velocity being low, then it follows that for that reason also
_the angle of incidence should be comparatively large_.

5. _Camber_.--Since such an aeroplane would be of low velocity, and
therefore possess a large angle of incidence, a _large camber_ would be
necessary.

Let us now consider the essentials for an aeroplane of maximum velocity
for its power, and possessing merely enough lift to get off the ground,
but no margin of lift.

1. Comparatively _high velocity_.

2. A comparatively _small surface_, because, being of greater velocity
than the maximum climber, a greater mass of air will be engaged for
a given surface and time, and therefore a smaller surface will be
sufficient to secure the requisite lift.

3. _A small angle relative to the propeller thrust_, since the latter
coincides with the direction of motion.

4. A comparatively _small angle of incidence_ by reason of the high
velocity.

5. A comparatively _small camber_ follows as a result of the small
angle of incidence.

[Illustration: ANGLES OF INCIDENCE (INDICATED APPROXIMATELY) OF AN
AEROPLANE DESIGNED AS A COMPROMISE BETWEEN VELOCITY AND CLIMB, AND
POSSESSING A SLIGHT MARGIN OF LIFT AT A LOW ALTITUDE AND WHEN THE
THRUST IS HORIZONTAL.]

MINIMUM ANGLE.

This gives the greatest velocity during horizontal flight at a low
altitude. Greater velocity would be secured if the surface, angle, and
camber were smaller and designed to just maintain horizontal flight with
a horizontal thrust. Also, in such case, the propeller would not be
thrusting downwards, but along a horizontal line which is obviously a
more efficient arrangement if we regard the aeroplane merely from one
point of view, _i.e._, either with reference to velocity or climb.

OPTIMUM ANGLE. (Thrust horizontal).

The velocity is less than at the smaller minimum angle, and, as
aeroplanes are designed to-day, the area and angle of incidence of the
surface is such as to secure a slight ascent at a low altitude. The
camber of the surface is designed for this angle of incidence and
velocity. The lift-drift ratio is best at this angle.

BEST CLIMBING ANGLE.

The velocity is now still less by reason of the increased angle
producing increase of drift. Less velocity at a given angle produces
less lift, but the increased angle more or less offsets the loss of lift
due to the decreased velocity; and, in addition, the thrust is now
hauling the aeroplane upwards.

MAXIMUM ANGLE.

The greater angle has now produced so much drift as to lessen the
velocity to a point where the combined lifts from the surface and from
the thrust are only just able to maintain horizontal flight. Any greater
angle will result in a still lower lift-drift ratio. The lift will then
become less than the weight and the aeroplane will consequently fall.
Such a fall is known as "stalling" or "pancaking."

=NOTE.--The golden rule for beginners: Never exceed the Best Climbing
Angle. Always maintain the flying speed of the aeroplane.=


SUMMARY.

_Essentials for Maximum Climb._

  1. Low velocity.
  2. Large surface.
  3. Large angle relative to propeller thrust.
  4. Large angle relative to direction of motion.
  5. Large camber.

_Essentials for Maximum Velocity._

  1. High velocity.
  2. Small surface.
  3. Small angle relative to propeller thrust.
  4. Small angle relative to direction of motion.
  5. Small camber.


It is mechanically impossible to construct an aeroplane of reasonable
weight of which it would be possible to vary the above opposing
essentials. Therefore, all aeroplanes are designed as a compromise
between Climb and Velocity.

As a rule aeroplanes are designed to have at low altitude a slight
margin of lift when the propeller thrust is horizontal. By this means,
when the altitude is reached where the margin of lift disappears
(on account of loss of engine power), and which is, consequently, the
altitude where it is just possible to maintain horizontal flight, the
aeroplane is flying with its thrust horizontal and with maximum
efficiency (as distinct from engine and propeller efficiency).

The margin of lift at low altitude, and when the thrust is horizontal,
should then be such that the higher altitude at which the margin of lift
is lost is that altitude at which most of the aeroplane's horizontal
flight work is done. That ensures maximum velocity when most required.

Unfortunately, where aeroplanes designed for fighting are concerned, the
altitude where most of the work is done is that at which both maximum
velocity and maximum margin of lift for power are required.

Perhaps some day a brilliant inventor will design an aeroplane of
reasonable weight and drift of which it will be possible for the pilot
to vary at will the above-mentioned opposing essentials. Then we shall
get maximum velocity, or maximum margin of lift, for power as required.
Until then the design of the aeroplane must remain a compromise between
Velocity and Climb.

[Footnote 14: See Newton's laws in the Glossary at the end of the book.]

[Footnote 15: See "Aerofoil" in the Glossary.]




CHAPTER II

STABILITY AND CONTROL


STABILITY is a condition whereby an object disturbed has a natural
tendency to return to its first and normal position. Example: a weight
suspended by a cord.

INSTABILITY is a condition whereby an object disturbed has a natural
tendency to move as far as possible away from its first position, with
no tendency to return. Example: a stick balanced vertically upon your
finger.

NEUTRAL INSTABILITY is a condition whereby an object disturbed has no
tendency to move farther than displaced by the force of the disturbance,
and no tendency to return to its first position.

In order that an aeroplane may be reasonably controllable, it is
necessary for it to possess some degree of stability longitudinally,
laterally, and directionally.

LONGITUDINAL STABILITY in an aeroplane is its stability about an axis
transverse to the direction of normal horizontal flight, and without
which it would pitch and toss.

LATERAL STABILITY is its stability about its longitudinal axis, and
without which it would roll sideways.

DIRECTIONAL STABILITY is its stability about its vertical axis, and
without which it would have no tendency to keep its course.

For such directional stability to exist there must be, in effect,[16]
more "keel-surface" behind the vertical axis than there is in front of
it. By keel-surface I mean everything to be seen when looking at an
aeroplane from the side of it--the sides of the body, undercarriage,
struts, wires, etc. The same thing applies to a weathercock. You know
what would happen if there was insufficient keel-surface behind the
vertical axis upon which it is pivoted. It would turn off its proper
course, which is opposite to the direction of the wind. It is very much
the same in the case of an aeroplane.

[Illustration]

The above illustration represents an aeroplane (directionally stable)
flying along the course B. A gust striking it as indicated acts upon the
greater proportion of keel-surface behind the turning axis and throws it
into the new course. It does not, however, travel along the new course,
owing to its momentum in the direction B. It travels, as long as such
momentum lasts, in a direction which is the resultant of the two forces
Thrust and Momentum. But the centre line of the aeroplane is pointing
in the direction of the new course. Therefore its attitude, relative to
the direction of motion, is more or less sideways, and it consequently
receives an air pressure in the direction C. Such pressure, acting upon
the keel-surface, presses the tail back towards its first position in
which the aeroplane is upon its course B.

What I have described is continually going on during flight, but in a
well-designed aeroplane such stabilizing movements are, most of the
time, so slight as to be imperceptible to the pilot.

If an aeroplane was not stabilized in this way, it would not only be
continually trying to leave its course, but it would also possess a
dangerous tendency to "nose away" from the direction of the side gusts.
In such case the gust shown in the above illustration would turn the
aeroplane round the opposite way a very considerable distance; and the
right wing, being on the outside of the turn, would travel with greater
velocity than the left wing. Increased velocity means increased lift;
and so, the right wing lifting, the aeroplane would turn over sideways
very quickly.

LONGITUDINAL STABILITY.--Flat surfaces are longitudinally stable owing
to the fact that with decreasing angles of incidence the centre line of
pressure (C.P.) moves forward.

The C.P. is a line taken across the surface, transverse to the direction
of motion, and about which all the air forces may be said to balance, or
through which they may be said to act.

[Illustration]

Imagine A to be a flat surface, attitude vertical, travelling through
the air in the direction of motion M. Its C.P. is then obviously along
the exact centre line of the surface as illustrated. In B, C, and D the
surfaces are shown with angles of incidence decreasing to nothing, and
you will note that the C.P. moves forward with the decreasing angle.[17]

Now, should some gust or eddy tend to make the surface decrease the
angle, _i.e._, dive, then the C.P. moves forward and pushes the front
of the surface up. Should the surface tend to assume too large an
angle, then the reverse happens--the C.P. moves back and pushes the
rear of the surface up. Flat surfaces are, then, theoretically stable
longitudinally. They are not, however, used, on account of their poor
lift-drift ratio.

As already explained, cambered surfaces are used, and these are
longitudinally unstable at those angles of incidence producing a
reasonable lift-drift ratio, _i.e._, at angles below about 12°.

A is a cambered surface, attitude approximately vertical, moving through
the air in the direction M. Obviously the C.P. coincides with the
transverse centre line of the surface.

With decreasing angles, down to angles of about 30°, the C.P. moves
forward as in the case of flat surfaces (see B); but angles above 30° do
not interest us, since they produce a very low ratio of lift to drift.

[Illustration]

Below angles of about 30° (see C) the dipping front part of the surface
assumes a negative angle of incidence resulting in the _downward_ air
pressure D, and the more the angle of incidence is decreased, the
greater such negative angle and its resultant pressure D. Since the
C.P. is the resultant of all the air forces, its position is naturally
affected by D, which causes it to move backwards. Now, should some gust
or eddy tend to make the surface decrease its angle of incidence,
_i.e._, dive, then the C.P. moves backwards, and, pushing up the rear
of the surface, causes it to dive the more. Should the surface tend to
assume too large an angle, then the reverse happens; the pressure D
decreases, with the result that C.P. moves forward and pushes up the
front of the surface, thus increasing the angle still further, the final
result being a "tail-slide."

It is therefore necessary to find a means of stabilizing the naturally
unstable cambered surface. This is usually secured by means of a
stabilizing surface fixed some distance in the rear of the main surface,
and it is a necessary condition that the neutral lift lines of the two
surfaces, when projected to meet each other, make a dihedral angle. In
other words, the rear stabilizing surface must have a lesser angle of
incidence than the main surface--certainly not more than one-third of
that of the main surface. This is known as the longitudinal dihedral.

[Illustration]

I may add that the tail-plane is sometimes mounted upon the aeroplane at
the same angle as the main surface, but, in such cases, it attacks air
which has received a downward deflection from the main surface, thus:

[Illustration]

The angle at which the tail surface attacks the air (the angle of
incidence) is therefore less than the angle of incidence of the main
surface.

I will now, by means of the following illustration, try to explain how
the longitudinal dihedral secures stability:

[Illustration]

First, imagine the aeroplane travelling in the direction of motion,
which coincides with the direction of thrust T. The weight is, of
course, balanced about a C.P., the resultant of the C.P. of the main
surface and the C.P. of the stabilizing surface. For the sake of
illustration, the stabilizing surface has been given an angle of
incidence, and therefore has a lift and C.P. In practice the stabilizer
is often set at no angle of incidence. In such case the proposition
remains the same, but it is, perhaps, a little easier to illustrate
it as above.

Now, we will suppose that a gust or eddy throws the machine into the
lower position. It no longer travels in the direction of T, since the
momentum in the old direction pulls it off that course. M is now the
resultant of the Thrust and the Momentum, and you will note that this
results in a decrease in the angle our old friend the neutral lift line
makes with M, _i.e._, a decrease in the angle of incidence and therefore
a decrease in lift.

We will suppose that this decrease is 2°. Such decrease applies to
both main surface and stabilizer, since both are fixed rigidly to the
aeroplane.

The main surface, which had 12° angle, has now only 10°, _i.e._, a loss
of _one-sixth_.

The stabilizer, which had 4° angle, has now only 2°, _i.e._, a loss of
_one-half_.

The latter has therefore lost a greater _proportion_ of its angle of
incidence, and consequently its lift, than has the main surface. It must
then fall relative to the main surface. The tail falling, the aeroplane
then assumes its first position, though at a slightly less altitude.

Should a gust throw the nose of the aeroplane up, then the reverse
happens. Both main surface and stabilizer increase their angles of
incidence in the same amount, but the angle, and therefore the lift, of
the stabilizer increases in greater proportion than does the angle and
lift of the main surface, with the result that it lifts the tail. The
aeroplane then assumes its first position, though at a slightly greater
altitude.

Do not fall into the widespread error that the angle of incidence varies
as the angle of the aeroplane to the horizontal. It varies with such
angle, but not as anything approaching it. Remember that the stabilizing
effect of the longitudinal dihedral lasts only as long as there is
momentum in the direction of the first course.

These stabilizing movements are taking place all the time, even though
imperceptible to the pilot.

Aeroplanes have, in the past, been built with a stabilizing surface
in front of the main surface instead of at the rear of it. In such
design the main surface (which is then the tail surface as well as the
principal lifting surface) must be set at a less angle than the forward
stabilizing surface, in order to secure a longitudinal dihedral. The
defect of such design lies in the fact that the main surface must have
a certain angle to lift the weight--say 5°. Then, in order to secure
a sufficiency of longitudinal stability, it is necessary to set the
forward stabilizer at about 15°. Such a large angle of incidence results
in a very poor lift-drift ratio (and consequently great loss of
efficiency), except at very low velocities compared with the speed of
modern aeroplanes. At the time such aeroplanes were built velocities
were comparatively low, and this defect was, for that reason, not
sufficiently appreciated. In the end it killed the "canard" or
"tail-first" design.

Aeroplanes of the Dunne and similar types possess no stabilizing surface
distinct from the main surface, but they have a longitudinal dihedral
which renders them stable.

The main surface towards the wing-tips is given a decreasing angle of
incidence and corresponding camber. The wing-tips then act as
longitudinal stabilizers.

[Illustration]

This design of aeroplane, while very interesting, has not proved very
practicable, owing to the following disadvantages: (1) The plan design
is not, from a mechanical point of view, so sound as that of the
ordinary aeroplane surface, which is, in plan, a parallelogram. It is,
then, necessary to make the strength of construction greater than would
otherwise be the case. That means extra weight. (2) The plan of the
surface area is such that the aspect ratio is not so high as if the
surface was arranged with its leading edges at right angles to the
direction of motion. The lower the aspect ratio, then, the less the
lift. This design, then, produces less lift for weight of surface than
would the same surface if arranged as a parallelogram. (3) In order to
secure the longitudinal dihedral, the angle of incidence has to be very
much decreased towards the wing-tips. Then, in order that the lift-drift
ratio may be preserved, there must be a corresponding decrease in the
camber. That calls for surface ribs of varying cambers, and results in
an expensive and lengthy job for the builder. (4) In order to secure
directional stability, the surface is, in the centre, arranged to dip
down in the form of a V, pointing towards the direction of motion.
Should the aeroplane turn off its course, then its momentum in the
direction of its first course causes it to move in a direction the
resultant of the thrust and the momentum. It then moves in a more or
less sideways attitude, which results in an air pressure upon one side
of the V, and which tends to turn the aeroplane back to its first
course. This arrangement of the surface results in a bad drift. Vertical
surfaces at the wing-tips may also be set at an angle producing the same
stabilizing effect, but they also increase the drift.

The gyroscopic action of a rotary engine will affect the longitudinal
stability when an aeroplane is turned to right or left. In the case of
a Gnome engine, fitted to a "pusher" aeroplane, such gyroscopic action
will tend to depress the nose of the aeroplane when it is turned to the
left, and to elevate it when it is turned to the right. When fitted to a
"tractor" aeroplane, the engine is reversed so that a reverse condition
results. In modern aeroplanes this tendency is not sufficiently
important to bother about, except in the matter of spiral descents
(see section headed "Spinning"). In the old days of crudely designed
and under-powered "pusher" aeroplanes this gyroscopic action was very
marked, and led the majority of pilots to dislike turning an aeroplane
to the right, since, in doing so, there was some danger of "stalling."

LATERAL STABILITY is far more difficult for the designer to secure
than is longitudinal or directional stability. Some degree of lateral
stability may be secured by means of the "lateral dihedral," _i.e._,
the upward inclination of the surface towards its wing-tips thus:

[Illustration]

Imagine the top =V=, illustrated opposite, to be the front view of a
surface flying towards you. The horizontal equivalent (H.E.) of the left
wing is the same as that of the right wing. Therefore, the lift of one
wing is equal to the lift of the other, and the weight, being situated
always in the centre, is balanced.

If some movement of the air causes the surface to tilt sideways, as in
the lower illustration, then you will note that the H.E. of the left
wing increases, and the H.E. of the right wing decreases. The left wing
then, having the greatest lift, rises; and the surface assumes its first
and normal position.

Unfortunately, however, the righting effect is not proportional to the
difference between the right and left H.E.'s.

[Illustration:
    R, Direction of reaction of wing indicated.
  R R, Resultant direction of reaction of both wings.
    M, Horizontal (sideway) component of reaction.
    L, Vertical component of reaction (lift).]

In the case of A, the resultant direction of the reaction of both wings
is opposed to the direction of gravity or weight. The two forces R R
and gravity are then evenly balanced, and the surface is in a state of
equilibrium.

In the case of B, you will note that the R R is not directly opposed
to gravity. This results in the appearance of M, and so the resultant
direction of motion of the aeroplane is no longer directly forward,
but is along a line the resultant of the Thrust and M. In other words,
it is, while flying forward, at the same time moving sideways in the
direction M.

In moving sideways, the keel-surface receives, of course, a pressure
from the air equal and opposite to M. Since such surface is greatest
in effect towards the tail, then the latter must be pushed sideways.
That causes the aeroplane to turn; and, the highest wing being on the
outside of the turn, it has a greater velocity than the lower wing. That
produces greater lift, and tends to tilt the aeroplane over still more.
Such tilting tendency is, however, opposed by the difference in the
H.E.'s of the two wings.

It then follows that, for the lateral dihedral angle to be effective,
such angle must be large enough to produce, when the aeroplane tilts,
a difference in the H.E.'s of the two wings, which difference must be
sufficient to not only oppose the tilting tendency due to the aeroplane
turning, but sufficient to also force the aeroplane back to its original
position of equilibrium.

It is now, I hope, clear to the reader that the lateral dihedral is not
quite so effective as would appear at first sight. Some designers,
indeed, prefer not to use it, since its effect is not very great, and
since it must be paid for in loss of H.E. and consequently loss of lift,
thus decreasing the lift-drift ratio, _i.e._, the efficiency. Also, it
is sometimes advanced that the lateral dihedral increases the "spill" of
air from the wing-tips and that this adversely affects the lift-drift
ratio.

_The disposition of the keel-surface_ affects the lateral stability. It
should be, in effect, equally divided by the longitudinal turning axis
of the aeroplane. If there is an excess of keel-surface above or below
such axis, then a side gust striking it will tend to turn the aeroplane
over sideways.

_The position of the centre of gravity_ affects lateral stability. If
too low, it produces a pendulum effect and causes the aeroplane to roll
sideways.

If too high, it acts as a stick balanced vertically would act. If
disturbed, it tends to travel to a position as far as possible from its
original position. It would then tend, when moved, to turn the aeroplane
over sideways and into an upside-down position.

From the point of view of lateral stability, the best position for
the centre of gravity is one a little below the centre of drift. This
produces a little lateral stability without any marked pendulum effect.

_Propeller torque_ affects lateral stability. An aeroplane tends to turn
over sideways in the opposite direction to which the propeller revolves.

[Illustration]

This tendency is offset by increasing the angle of incidence (and
consequently the lift) of the side tending to fall; and it is always
advisable, if practical considerations allow it, to also decrease the
angle upon the other side. In that way it is not necessary to depart so
far from the normal angle of incidence at which the lift-drift ratio is
highest.

_Wash-in_ is the term applied to the increased angle.

_Wash-out_ is the term applied to the decreased angle.

Both lateral and directional stability may be improved by washing out
the angle of incidence on both sides of the surface, thus:

[Illustration]

The decreased angle decreases the drift and therefore the effect of
gusts upon the wing-tips, which is just where they have the most effect
upon the aeroplane, owing to the distance from the turning axis.

The wash-out also renders the ailerons (lateral controlling services)
more effective, as, in order to operate them, it is not then necessary
to give them such a large angle of incidence as would otherwise be
required.

[Illustration:  Note: Observe that the inclination of the ailerons to
the surface is the same in each case.]

The less the angle of incidence of the ailerons, the better their
lift-drift ratio, i.e., their efficiency. You will note that, while the
aileron attached to the surface with washed-out angle is operated to the
same extent as the aileron illustrated above it, its angle of incidence
is considerably less. Its efficiency is therefore greater.

The advantages of the wash-in must, of course, be paid for in some loss
of lift, as the lift decreases with the decreased angle.

In order to secure all the above described advantages, a combination is
sometimes effected, thus:

[Illustration: "Wash Out" on both sides relative to the Centre.]

BANKING.--An aeroplane turned off its course to right or left does not
at once proceed along its new course. Its momentum in the direction of
its first course causes it to travel along a line the resultant of such
momentum and the thrust. In other words, it more or less skids sideways
and away from the centre of the turn. Its lifting surfaces do not then
meet the air in their correct attitude, and the lift may fall to such an
extent as to become less than the weight, in which case the aeroplane
must fall. This bad effect is minimized by "banking," _i.e._, tilting
the aeroplane sideways. The bottom of the lifting surface is in that way
opposed to the air through which it is moving in the direction of the
momentum and receives an opposite air pressure. The rarefied area over
the top of the surface is rendered still more rare, and this, of course,
assists the air pressure in opposing the momentum.

The velocity of the "skid," or sideways movement, is then only such
as is necessary to secure an air pressure equal and opposite to the
centrifugal force of the turn.

The sharper the turn, the greater the effect of the centrifugal force,
and therefore the steeper should be the "bank." _Experientia docet_.

_The position of the centre of gravity_ affects banking. A low C.G. will
tend to swing outward from the centre of the turn, and will cause the
aeroplane to bank--perhaps too much, in which case the pilot must remedy
matters by operating the ailerons.

A high C.G. also tends to swing outward from the centre of the turn. It
will tend to make the aeroplane bank the wrong way, and such effect must
be remedied by means of the ailerons.

The pleasantest machine from a banking point of view is one in which
the C.G. is a little below the centre of drift. It tends to bank the
aeroplane the right way for the turn, and the pilot can, if necessary,
perfect the bank by means of the ailerons.

_The disposition of the keel-surface_ affects banking. It should be,
in effect, evenly divided by the longitudinal axis. An excess of
keel-surface above the longitudinal axis will, when banking, receive an
air pressure causing the aeroplane to bank, perhaps too much. An excess
of keel-surface below the axis has the reverse effect.

SIDE-SLIPPING.--This usually occurs as a result of over-banking. It is
always the result of the aeroplane tilting sideways and thus decreasing
the horizontal equivalent, and therefore the lift, of the surface. An
excessive "bank," or sideways tilt, results in the H.E., and therefore
the lift, becoming less than the weight, when, of course, the aeroplane
must fall, _i.e._, side-slip.

[Illustration]

When making a very sharp turn it is necessary to bank very steeply
indeed. If, at the same time, the longitudinal axis of the aeroplane
remains approximately horizontal, then there must be a fall, and the
direction of motion will be the resultant of the thrust and the fall as
illustrated above in sketch A. The lifting surfaces and the controlling
surfaces are not then meeting the air in the correct attitude, with the
result that, in addition to falling, the aeroplane will probably become
quite unmanageable.

The pilot, however, prevents such a state of affairs from happening by
"nosing-down," _i.e._, by operating the rudder to turn the nose of the
aeroplane downward and towards the direction of motion as illustrated in
sketch B. This results in the higher wing, which is on the outside of
the turn, travelling with greater velocity, and therefore securing a
greater reaction than the lower wing, thus tending to tilt the aeroplane
over still more. The aeroplane is now almost upside-down, _but_ its
attitude relative to the direction of motion is correct and the
controlling surfaces are all of them working efficiently. The recovery
of a normal attitude relative to the Earth is then made as illustrated
in sketch C.

The pilot must then learn to know just the angle of bank at which the
margin of lift is lost, and, if a sharp turn necessitates banking beyond
that angle, he must "nose-down."

In this matter of banking and nosing-down, and, indeed, regarding
stability and control generally, the golden rule for all but very
experienced pilots should be: _Keep the aeroplane in such an attitude
that the air pressure is always directly in the pilot's face._ The
aeroplane is then always engaging the air as designed to do so, and both
lifting and controlling surfaces are acting efficiently. The only
exception to this rule is a vertical dive, and I think that is obviously
not an attitude for any but very experienced pilots to hanker after.

SPINNING.--This is the worst of all predicaments the pilot can find
himself in. Fortunately it rarely happens.

It is due to the combination of (1) a very steep spiral descent of small
radius, and (2) insufficiency of keel-surface behind the vertical axis,
or the jamming of the rudder and/or elevator into a position by which
the aeroplane is forced into an increasingly steep and small spiral.

Owing to the small radius of such a spiral, the mass of the aeroplane
may gain a rotary momentum greater, in effect, than the air pressure of
the keel-surface or controlling surfaces opposed to it; and, when once
such a condition occurs, it is difficult to see what can be done by the
pilot to remedy it. The sensible pilot will not go beyond reasonable
limits of steepness and radius when executing spiral descents.

[Illustration: Nose Dive Spin.]

In this connection every pilot of an aeroplane fitted with a rotary
engine should bear in mind the gyroscopic effect of such engine. In the
case of such an engine fitted to a "pusher" aeroplane, its effect when a
left-hand turn is made is to depress the nose of the machine. If fitted
to a "tractor" it is reversed, so the effect is to depress the nose
if a right-hand turn is made. The sharper the turn, the greater such
effect--an effect which may render the aeroplane unmanageable if the
spiral is one of very small radius and the engine is revolving with
sufficient speed to produce a material gyroscopic effect. Such
gyroscopic effect should, however, slightly _assist_ the pilot to
navigate a small spiral if he will remember to (1) make _right-hand_
spirals in the case of a "pusher," (2) make _left-hand_ spirals in the
case of a "tractor." The effect will then be to keep the nose up and
prevent a nose-dive. I say "slightly" assist because the engine is, of
course, throttled down for a spiral descent, and its lesser revolutions
will produce a lesser gyroscopic effect.

On the other hand, it might be argued that if the aeroplane gets into a
"spin," anything tending to depress the nose of the machine is of value,
since it is often claimed that the best way to get out of a spin is
to put the machine into a nose-dive--the great velocity of the dive
rendering the controls more efficient and better enabling the pilot to
regain control. It is, however, a very contentious point, and few are
able to express opinions based on practice, since pilots indulging in
nose-dive spins are either not heard of again or have usually but a hazy
recollection of exactly what happened to them.

GLIDING DESCENT WITHOUT PROPELLER THRUST.--All aeroplanes are, or should
be, designed to assume their correct gliding angle when the power and
thrust is cut off. This relieves the pilot of work, worry, and danger
should he find himself in a fog or cloud. The pilot, although he may not
realize it, maintains the correct attitude of the aeroplane by observing
its position relative to the horizon. Flying into a fog or cloud the
horizon is lost to view, and he must then rely upon his instruments--(1)
the compass for direction; (2) an inclinometer (arched spirit-level)
mounted transversely to the longitudinal axis, for lateral stability;
and (3) an inclinometer mounted parallel to the longitudinal axis, or
the airspeed indicator, which will indicate a nose-down position by
increase in air speed, and a tail-down position by decrease in air
speed.

The pilot is then under the necessity of watching three instruments
and manipulating his three controls to keep the instruments indicating
longitudinal, lateral, and directional stability. That is a feat beyond
the capacity of the ordinary man. If, however, by the simple movement
of throttling down the power and thrust, he can be relieved of looking
after the longitudinal stability, he then has only two instruments to
watch. That is no small job in itself, but it is, at any rate, fairly
practicable.

[Illustration]

Aeroplanes are, then, designed, or should be, so that the centre of
gravity is slightly forward of centre of lift. The aeroplane is then,
as a glider, nose-heavy--and the distance the C.G. is placed in advance
of the C.L. should be such as to ensure a gliding angle producing a
velocity the same as the normal flying speed (for which the strength
of construction has been designed).

In order that this nose-heavy tendency should not exist when the thrust
is working and descent not required, the centre of thrust is placed a
little below the centre of drift or resistance, and thus tends to pull
up the nose of the aeroplane.

The distance the centre of thrust is placed below the centre of drift
should be such as to produce a force equal and opposite to that due to
the C.G. being forward of the C.L. (see illustration above).

LOOPING AND UPSIDE-DOWN FLYING.--If a loop is desired, it is best to
throttle the engine down at point A. The C.G. being forward of the C.P.,
then causes the aeroplane to nose down, and assists the pilot in making
a reasonably small loop along the course C and in securing a quick
recovery. If the engine is not throttled down, then the aeroplane may be
expected to follow the course D, which results in a longer nose dive
than in the case of the course C.

[Illustration: Position A. Path B. Path C. Path D.]

A steady, gentle movement of the elevator is necessary. A jerky movement
may change the direction of motion so suddenly as to produce dangerous
air stresses upon the surfaces, in which case there is a possibility of
collapse.

If an upside-down flight is desired, the engine may, or may not, be
throttled down at point A. If not throttled down, then the elevator must
be operated to secure a course approximately in the direction B. If it
is throttled down, then the course must be one of a steeper angle than
B, or there will be danger of stalling.

[Footnote 16: "In effect" because, although there may be actually the
greatest proportion of keel-surface in front of the vertical axis, such
surface may be much nearer to the axis than is the keel-surface towards
the tail. The latter may then be actually less than the surface in
front, but, being farther from the axis, it has a greater leverage,
and consequently is greater in effect than the surface in front.]

[Footnote 17: The reason the C.P. of an inclined surface is forward of
the centre of the surface is because the front of the surface does most
of the work, as explained on p. 62.]




CHAPTER III

RIGGING


In order to rig an aeroplane intelligently, and to maintain it in an
efficient and safe condition, it is necessary to possess a knowledge of
the stresses it is called upon to endure, and the strains likely to
appear.

STRESS is the load or burden a body is called upon to bear. It is
usually expressed by the result found by dividing the load by the number
of superficial square inches contained in the cross-sectional area of
the body.

[Illustration: Cross Sectional area]

Thus, if, for instance, the object illustrated above contains 4 square
inches of cross-sectional area, and the total load it is called upon to
endure is 10 tons, the stress would be expressed as 2-1/2 tons.

STRAIN is the deformation produced by stress.

THE FACTOR OF SAFETY is usually expressed by the result found by
dividing the stress at which it is known the body will collapse by the
maximum stress it will be called upon to endure. For instance, if a
control wire be called upon to endure a maximum stress of 2 cwts., and
the known stress at which it will collapse is 10 cwts., the factor of
safety is then 5.

COMPRESSION.--The simple stress of compression tends to produce a
crushing strain. Example: the interplane and fuselage struts.

TENSION.--The simple stress of tension tends to produce the strain of
elongation. Example: all the wires.

BENDING.--The compound stress of bending is a combination of compression
and tension.

[Illustration]

The above sketch illustrates a straight piece of wood of which the top,
centre, and bottom lines are of equal length. We will now imagine it
bent to form a circle, thus:

[Illustration]

The centre line is still the same length as before being bent; but the
top line, being farther from the centre of the circle, is now longer
than the centre line. That can be due only to the strain of elongation
produced by the stress of tension. The wood between the centre line and
the top line is then in tension; and the farther from the centre, the
greater the strain, and consequently the greater the tension.

The bottom line, being nearest to the centre of the circle, is now
shorter than the centre line. That can be due only to the strain of
crushing produced by the stress of compression. The wood between the
centre and bottom lines is then in compression; and the nearer the
centre of the circle, the greater the strain, and consequently the
greater the compression.

It then follows that there is neither tension nor compression, _i.e._,
no stress, at the centre line, and that the wood immediately surrounding
it is under considerably less stress than the wood farther away. This
being so, the wood in the centre may be hollowed out without unduly
weakening struts and spars. In this way 25 to 33 per cent. is saved in
the weight of wood in an aeroplane.

The strength of wood is in its fibres, which should, as far as possible,
run without break from one end of a strut or spar to the other end. A
point to remember is that the outside fibres, being farthest removed
from the centre line, are doing by far the greatest work.

SHEAR STRESS is such that, when material collapses under it, one part
slides over the other. Example: all the locking pins.

[Illustration]

Some of the bolts are also in shear or "sideways" stress, owing to lugs
under their heads and from which wires are taken. Such a wire, exerting
a sideways pull upon a bolt, tries to break it in such a way as to make
one piece of the bolt slide over the other piece.

TORSION.--This is a twisting stress compounded of compression, tension,
and shear stresses. Example: the propeller shaft.

NATURE OF WOOD UNDER STRESS.--Wood, for its weight, takes the stress
of compression far better than any other stress. For instance: a
walking-stick of less than 1 lb. in weight will, if kept perfectly
straight, probably stand up to a compression stress of a ton or more
before crushing; whereas, if the same stick is put under a bending
stress, it will probably collapse to a stress of not more than about
50 lb. That is a very great difference, and, since weight is of the
greatest importance, the design of an aeroplane is always such as to, as
far as possible, keep the various wooden parts of its construction in
direct compression. Weight being of such vital importance, and designers
all trying to outdo each other in saving weight, it follows that the
factor of safety is rather low in an aeroplane. The parts in direct
compression will, however, take the stresses safely provided the
following conditions are carefully observed.


CONDITIONS TO BE OBSERVED:

1. _All the spars and struts must be perfectly straight._

[Illustration]

The above sketch illustrates a section through an interplane strut. If
the strut is to be kept straight, _i.e._, prevented from bending, then
the stress of compression must be equally disposed about the centre of
strength. If it is not straight, then there will be more compression on
one side of the centre of strength than on the other side. That is a
step towards getting compression on one side and tension on the other
side, in which case it may be forced to take a bending stress for which
it is not designed. Even if it does not collapse it will, in effect,
become shorter, and thus throw out of adjustment the gap and all the
wires attached to the top and bottom of the strut, with the result that
the flight efficiency of the aeroplane will be spoiled.

[Illustration: Strut straight. Wires and gap correctly adjusted. Strut
bent throwing wires and gap out of adjustment.]

The only exception to the above condition is what is known as the Arch.
For instance, in the case of the Maurice Farman, the spars of the
centre-section plane, which have to take the weight of the nacelle,
are arched upwards. If this was not done, it is possible that rough
landings might result in the weight causing the spars to become slightly
distorted downwards. That would produce a dangerous bending stress,
but, as long as the wood is arched, or, at any rate, kept from bending
downwards, it will remain in direct compression and no danger can
result.

2. _Struts and spars must be symmetrical._ By that I mean that the
cross-sectional dimensions must be correct, as otherwise there will be
bulging places on the outside, with the result that the stress will not
be evenly disposed about the centre of strength, and a bending stress
may be produced.

3. _Struts, spars, etc., must be undamaged._ Remember that, from what
I have already explained about bending stresses, the outside fibres of
the wood are doing by far the most work. If these get bruised or scored,
then the strut or spar suffers in strength much more than one might
think at first sight; and, if it ever gets a tendency to bend, it is
likely to collapse at that point.

4. _The wood must have a good, clear grain with no cross-grain, knots,
or shakes._ Such blemishes produce weak places and, if a tendency to
bend appears, then it may collapse at such a point.

[Illustration: Strut bedded properly. Strut bedded badly.]

5. _The struts, spars, etc., must be properly bedded into their sockets
or fittings._ To begin with, they must be of good pushing or gentle
tapping fit. They must never be driven in with a heavy hammer. Then
again, a strut must bed well down all over its cross-sectional area as
illustrated above; otherwise the stress of compression will not be
evenly disposed about the centre of strength, and that may produce a
bending stress. The bottom of the strut or spar should be covered with
some sort of paint, bedded into the socket or fitting, and then
withdrawn to see if the paint has stuck all over the bed.

6. The atmosphere is sometimes much damper than at other times, and this
causes wood to expand and contract appreciably. This would not matter
but for the fact that it does not expand and contract uniformly, but
becomes unsymmetrical, _i.e._, distorted. I have already explained the
danger of that in condition 2. This should be minimized by _well
varnishing the wood_ to keep the moisture out of it.

FUNCTION OF INTERPLANE STRUTS.--These struts have to keep the lifting
surfaces or "planes" apart, but this is only part of their work. They
must keep the planes apart, so that the latter are in their correct
attitude. That is only so when the spars of the bottom plane are
parallel with those of the top plane. Also, the chord of the top plane
must be parallel with the chord of the bottom plane. If that is not so,
then one plane will not have the same angle of incidence as the other
one. At first sight one might think that all that is necessary is to cut
all the struts to be the same length, but that is not the case.

[Illustration]

Sometimes, as illustrated above, the rear spar is not so thick as the
main spar, and it is then necessary to make up for that difference by
making the rear struts correspondingly longer. If that is not done,
then the top and bottom chords will not be parallel, and the top and
bottom planes will have different angles of incidence. Also, the sockets
or fittings, or even the spars upon which they are placed, sometimes
vary in thickness owing to faulty manufacture. This must be offset by
altering the length of the struts. The best way to proceed is to measure
the distance between the top and bottom spars by the side of each strut,
and if that distance, or "gap" as it is called, is not as stated in the
aeroplane's specifications, then make it correct by changing the length
of the strut. This applies to both front and rear interplane struts.
When measuring the gap, always be careful to measure from the centre
of the spar, as it may be set at an angle, and the rear of it may be
considerably lower than its front.

BORING HOLES IN WOOD.--It should be a strict rule that no spar be used
which has an unnecessary hole in it. Before boring a hole, its position
should be confirmed by whoever is in charge of the workshop. A bolt-hole
should be of a size to enable the bolt to be pushed in, or, at any rate,
not more than gently tapped in. Bolts should not be hammered in, as that
may split the spar. On the other hand, a bolt should not be slack in its
hole, as, in such a case, it may work sideways and split the spar, not
to speak of throwing out of adjustment the wires leading from the lug
or socket under the bolt-head.

WASHERS.--Under the bolt-head, and also under the nut, a washer must be
placed--a very large washer compared with the size which would be used
in all-metal construction. This is to disperse the stress over a large
area; otherwise the washer may be pulled into the wood and weaken it,
besides possibly throwing out of adjustment the wires attached to the
bolt or the fitting it is holding to the spar.

LOCKING.--Now as regards locking the bolts. If split pins are used,
be sure to see that they are used in such a way that the nut cannot
possibly unscrew at all. The split pin should be passed through the bolt
as near as possible to the nut. It should not be passed through both nut
and bolt.

If it is locked by burring over the edge of the bolt, do not use a heavy
hammer and try to spread the whole head of the bolt. That might damage
the woodwork inside the fabric-covered surface. Use a small, light
hammer, and gently tap round the edge of the bolt until it is burred
over.

TURNBUCKLES.--A turnbuckle is composed of a central barrel into each end
of which is screwed an eye-bolt. Wires are taken from the eyes of the
eye-bolt, and so, by turning the barrel, they can be adjusted to their
proper tension. Eye-bolts must be a good fit in the barrel; that is to
say, not slack and not very tight. Theoretically it is not necessary
to screw the eye-bolt into the barrel for a distance greater than the
diameter of the bolt, but, in practice, it is better to screw it in
for a considerably greater distance than that if a reasonable degree
of safety is to be secured.

Now about turning the barrel to secure the right adjustment. The barrel
looks solid, but, as a matter of fact, it is hollow and much more frail
than it appears. For that reason it should not be turned by seizing
it with pliers, as that may distort it and spoil the bore within it.
The best method is to pass a piece of wire through the hole in its
centre, and to use that as a lever. When the correct adjustment has been
secured, the turnbuckle must be locked to prevent it from unscrewing.
It is quite possible to lock it in such a way as to allow it to unscrew
a quarter or a half turn, and that would throw the wires out of the very
fine adjustment necessary. The proper way is to use the locking wire so
that its direction is such as to oppose the tendency of the barrel to
unscrew, thus:

[Illustration]

WIRES.--The following points should be carefully observed where wire is
concerned:

1. _Quality._--It must not be too hard or too soft. An easy practical
way of learning to know the approximate quality of wire is as follows:

Take three pieces, all of the same gauge, and each about a foot in
length. One piece should be too soft, another too hard, and the third
piece of the right quality. Fix them in a vice, about an inch apart and
in a vertical position, and with the light from a window shining upon
them. Burnish them if necessary, and you will see a band of light
reflected from each wire.

Now bend the wires over as far as possible and away from the light.
Where the soft wire is concerned, it will squash out at the bend, and
this will be indicated by the band of light, which will broaden at that
point. In the case of the wire which is too hard, the band of light will
broaden very little at the turn, but, if you look carefully, you will
see some little roughness of surface. In the case of the wire of the
right quality, the band of light may broaden a very little at the turn,
but there will be no roughness of surface.

By making this experiment two or three times one can soon learn to know
really bad wire from good, and also learn to know the strength of hand
necessary to bend the right quality.

2. _It must not be damaged._ That is to say, it must be unkinked,
rustless, and unscored.

3. Now as regards keeping wire in good condition. Where outside wires
are concerned, they should be kept _well greased or oiled_, especially
where bent over at the ends. Internal bracing wires cannot be reached
for the purpose of regreasing them, as they are inside fabric-covered
surfaces. They should be prevented from rusting by being painted with
an anti-rust mixture. Great care should be taken to see that the wire
is perfectly clean and dry before being painted. A greasy finger-mark
is sufficient to stop the paint from sticking to the wire. In such
a case there will be a little space between the paint and the wire.
Air may enter there and cause the wire to rust.

4. _Tension of Wires._--The tension to which the wires are adjusted is
of the greatest importance. All the wires should be of the same tension
when the aeroplane is supported in such a way as to throw no stress upon
them. If some wires are in greater tension than others, the aeroplane
will quickly become distorted and lose its efficiency.

In order to secure the same tension of all wires, the aeroplane,
when being rigged, should be supported by packing underneath the lower
surfaces as well as by packing underneath the fuselage or nacelle. In
this way the anti-lift wires are relieved of the weight, and there is
no stress upon any of the wires.

As a general rule the wires of an aeroplane are tensioned too much.
The tension should be sufficient to keep the framework rigid. Anything
more than that lowers the factor of safety, throws various parts of the
framework into undue compression, pulls the fittings into the wood, and
will, in the end, distort the whole framework of the aeroplane.

Only experience will teach the rigger what tension to employ. Much may
be done by learning the construction of the various types of aeroplanes,
the work the various parts do, and in cultivating a touch for tensioning
wires by constantly handling them.

5. _Wires with no Opposition Wires._--In some few cases wires will be
found which have no opposition wires pulling in the opposite direction.
For instance, an auxiliary lift wire may run from the bottom of a strut
to a spar in the top plane at a point between struts. In such a case
great care should be taken not to tighten the wire beyond barely taking
up the slack.

[Illustration: Distortion of upper wing caused by auxiliary lift wire
being too tight.]

Such a wire must be a little slack, or, as illustrated above, it will
distort the framework. That, in the example given, will spoil the camber
(curvature) of the surface, and result in changing both the lift and
the drift at that part of the surface. Such a condition will cause the
aeroplane to lose its directional stability and also to fly one wing
down.

I cannot impress this matter of tension upon the reader too strongly.
It is of the utmost importance. When this, and also accuracy in securing
the various adjustments, has been learned, one is on the way to becoming
a good rigger.

6. _Wire Loops._--Wire is often bent over at its end in the form of a
loop, in order to connect with a turnbuckle or fitting. These loops,
even when made as perfectly as possible, have a tendency to elongate,
thus spoiling the adjustment of the wires. Great care should be taken
to minimize this as much as possible. The rules to be observed are as
follows:

[Illustration: Wrong shape. Result of wrong shape. Right Shape.]

(_a_) The size of the loop should be as small as possible within reason.
By that I mean it should not be so small as to create the possibility of
the wire breaking.

(_b_) The shape of the loop should be symmetrical.

(_c_) It should have well-defined shoulders in order to prevent the
ferrule from slipping up. At the same time, a shoulder should not have
an angular place.

(_d_) When the loop is finished it should be undamaged, and it should
not be, as is often the case, badly scored.

7. _Stranded Wire Cable._--No splice should be served with twine until
it has been inspected by whoever is in charge of the workshop. The
serving may cover bad work.

Should a strand become broken, then the cable should be replaced at once
by another one.

Control cables have a way of wearing out and fraying wherever they pass
round pulleys. Every time an aeroplane comes down from flight the rigger
should carefully examine the cables, especially where they pass round
pulleys. If he finds a strand broken, he should replace the cable.

The ailerons' balance cable on the top of the top plane is often
forgotten, since it is necessary to fetch a high pair of steps in order
to examine it. Don't slack this, or some gusty day the pilot may
unexpectedly find himself minus the aileron control.

CONTROLLING SURFACES.--The greatest care should be exercised in rigging
the aileron, rudder, and elevator properly, for the pilot entirely
depends upon them in managing the aeroplane.

[Illustration: Position in which controlling surface must be rigged. It
will be its position during flight.]

The ailerons and elevator should be rigged so that, when the aeroplane
is in flight, they are in a fair true line with the surface in front and
to which they are hinged.

[Illustration: Position during flight. Position in which controlling
surface must be rigged.]

If the surface to which they are hinged is not a lifting surface, then
they should be rigged to be in a fair true line with it as illustrated
above.

If the controlling surface is, as illustrated, hinged to the back of a
lifting surface, then it should be rigged a little below the position it
would occupy if in a fair true line with the surface in front. This is
because, in such a case, it is set at an angle of incidence. This angle
will, during flight, cause it to lift a little above the position in
which it has been rigged. It is able to lift owing to a certain amount
of slack in the control wire holding it--and one cannot adjust the
control wire to have no slack, because that would cause it to bind
against the pulleys and make the operation of it too hard for the pilot.
It is therefore necessary to rig it a little below the position it would
occupy if it was rigged in a fair true line with the surface in front.
Remember that this only applies when it is hinged to a lifting surface.
The greater the angle of incidence (and therefore the lift) of the
surface in front, then the more the controlling surface will have to be
rigged down.

As a general rule it is safe to rig it down so that its trailing edge
is 1/2 to 3/4 inch below the position it would occupy if in a fair line
with the surface in front; or about 1/2 inch down for every 18 inches of
chord of the controlling surface.

When making these adjustments the pilot's control levers should be in
their neutral positions. It is not sufficient to lash them. They should
be rigidly blocked into position with wood packing.

The surfaces must not be distorted in any way. If they are held true by
bracing wires, then such wires must be carefully adjusted. If they are
distorted and there are no bracing wires with which to true them, then
some of the internal framework will probably have to be replaced.

The controlling surfaces should never be adjusted with a view to
altering the stability of the aeroplane. Nothing can be accomplished in
that way. The only result will be to spoil the control of the aeroplane.

FABRIC-COVERED SURFACES.--First of all make sure that there is no
distortion of spars or ribs, and that they are perfectly sound. Then
adjust the internal bracing wires so that the ribs are parallel to the
direction of flight. The ribs usually cause the fabric to make a ridge
where they occur, and, if such ridge is not parallel to the direction of
flight, it will produce excessive drift. As a rule the ribs are at right
angles to both main and rear spars.

The tension of the internal bracing wires should be just sufficient to
give rigidity to the framework. They should not be tensioned above that
unless the wires are, at their ends, bent to form loops. In that case a
little extra tension may be given to offset the probable elongation of
the loops.

The turnbuckles must now be generously greased, and served round with
adhesive tape. The wires must be rendered perfectly dry and clean, and
then painted with an anti-rust mixture. The woodwork must be well
varnished.

If it is necessary to bore holes in the spars for the purpose of
receiving, for instance, socket bolts, then their places should be
marked before being bored and their positions confirmed by whoever is in
charge of the workshop. All is now ready for the sail-maker to cover the
surface with fabric.

ADJUSTMENT OF CONTROL CABLES.--The adjustment of the control cables is
quite an art, and upon it will depend to a large degree the quick and
easy control of the aeroplane by the pilot.

The method is as follows:

After having rigged the controlling surfaces, and as far as possible
secured the correct adjustment of the control cables, then remove the
packing which has kept the control levers rigid. Then, sitting in the
pilot's seat, move the control levers _smartly_. Tension the control
cables so that when the levers are smartly moved there is no perceptible
snatch or lag. Be careful not to tension the cables more than necessary
to take out the snatch. If tensioned too much they will (1) bind round
the pulleys and result in hard work for the pilot; (2) throw dangerous
stresses upon the controlling surfaces, which are of rather flimsy
construction; and (3) cause the cables to fray round the pulleys quicker
than would otherwise be the case.

Now, after having tensioned the cables sufficiently to take out the
snatch, place the levers in their neutral positions, and move them to
and fro about 1/8 inch either side of such positions. If the adjustment
is correct, it should be possible to see the controlling surfaces move.
If they do not move, then the control cables are too slack.

FLYING POSITION.--Before rigging an aeroplane or making any adjustments
it is necessary to place it in what is known as its "flying position."
I may add that it would be better termed its "rigging position."

In the case of an aeroplane fitted with a stationary engine this is
secured by packing up the machine so that the engine foundations are
perfectly horizontal both longitudinally and laterally. This position is
found by placing a straight-edge and a spirit-level across the engine
foundations (both longitudinally and laterally), and great care should
be taken to see that the bubble is exactly in the centre of the level.
The slightest error will assume magnitude towards the extremities of
the aeroplane. Great care should be taken to block up the aeroplane
rigidly. In case it gets accidentally disturbed while the work is going
on, it is well to constantly verify the flying position by running
the straight-edge and spirit-level over the engine foundations. The
straight-edge should be carefully tested before being used, as, being
generally made of wood, it will not remain true long. Place it lightly
in a vice, and in such a position that a spirit-level on top shows
the bubble exactly in the centre. Now slowly move the level along the
straight-edge, and the bubble should remain exactly in the centre.
If it does not do so, then the straight-edge is not true and must be
corrected. _This should never be omitted._

In the case of aeroplanes fitted with engines of the rotary type, the
"flying position" is some special attitude laid down in the aeroplane's
specifications, and great care should be taken to secure accuracy.

ANGLE OF INCIDENCE.--One method of finding the angle of incidence is
as follows:

[Illustration]

First place the aeroplane in its flying position. The corner of the
straight-edge must be placed underneath and against the _centre_ of the
rear spar, and held in a horizontal position parallel to the ribs. This
is secured by using a spirit-level. The set measurement will then be
from the top of the straight-edge to the centre of the bottom surface of
the main spar, or it may be from the top of the straight-edge to the
lowest part of the leading edge. Care should be taken to measure from
the centre of the spar and to see that the bubble is exactly in the
centre of the level. Remember that all this will be useless if the
aeroplane has not been placed accurately in its flying position.

This method of finding the angle of incidence must be used under every
part of the lower surface where struts occur. It should not be used
between the struts, because, in such places, the spars may have taken
a slight permanent set up or down; not, perhaps, sufficiently bad to
make any material difference to the flying of the machine, but quite
bad enough to throw out the angle of incidence, which cannot be
corrected at such a place.

If the angle is wrong, it should then be corrected as follows:

If it is too great, then the rear spar must be warped up until it is
right, and this is done by slackening _all_ the wires going to the top
of the strut, and then tightening _all_ the wires going to the bottom
of the strut.

If the angle is too small, then slacken _all_ the wires going to the
bottom of the strut, and tighten _all_ the wires going to the top of the
strut, until the correct adjustment is secured.

Never attempt to adjust the angle by warping the main spar.

The set measurement, which is of course stated in the aeroplane's
specifications, should be accurate to 1/16 inch.

LATERAL DIHEDRAL ANGLE.--One method of securing this is as follows,
and this method will, at the same time, secure the correct angle of
incidence:

[Illustration: FRONT ELEVATION and PLAN.]

The strings, drawn very tight, must be taken over both the main and
rear spars of the top surface. They must run between points on the
spars just inside the outer struts. The set measurement (which should
be accurate to 1/16 inch or less) is then from the strings down to four
points on the main and rear spars of the centre-section surface. These
points should be just inside the four centre-section struts; that is
to say, as far as possible away from the centre of the centre-section.
Do not attempt to take the set measurement near the centre of the
centre-section.

The strings should be as tight as possible, and, if it can be arranged,
the best way to accomplish that is as shown in the above illustration,
_i.e._, by weighting the strings down to the spars by means of weights
and tying their ends to struts. This will give a tight and motionless
string.

However carefully the above adjustment is made, there is sure to be some
slight error. This is of no great importance, provided it is divided
equally between the left- and right-hand wings. In order to make sure
of this, certain check measurements should be taken as follows:

Each bay must be diagonally measured, and such measurements must be the
same to within 1/16 inch on each side of the aeroplane. As a rule such
diagonal measurements are taken from the bottom socket of one strut to
the top socket of another strut, but this is bad practice, because of
possible inaccuracies due to faulty manufacture.

The points between which the diagonal measurements are taken should be
at fixed distances from the butts of the spars, such distances being the
same on each side of the aeroplane, thus:

[Illustration: Points A, B, and C, must be the same fixed distances
from the butt as are Points D, E, and F. Distances 1 and 2 must equal
distances 3 and 4.]

The above applies to both front and rear bays.

It would be better to use the centre line of the aeroplane rather than
the butts of the spars. It is not practicable to do so, however, as the
centre line probably runs through the petrol tanks, etc.

THE DIHEDRAL BOARD.--Another method of securing the dihedral angle, and
also the angle of incidence, is by means of the dihedral board. It is a
light handy thing to use, but leads to many errors, and should not be
used unless necessary. The reasons are as follows:

The dihedral board is probably not true. If it must be used, then it
should be very carefully tested for truth beforehand. Another reason
against its use is that it has to be placed on the spars in a position
between the struts, and that is just where the spars may have a little
permanent set up or down, or some inaccuracy of surface which will, of
course, throw out the accuracy of the adjustment. The method of using
it is as follows:

[Illustration]

The board is cut to the same angle as that specified for the upward
inclination of the surface towards its wing-tips. It is placed on the
spar as indicated above, and it is provided with two short legs to raise
it above the flanges of the ribs (which cross over the spars), as they
may vary in depth. A spirit-level is then placed on the board, and the
wires must be adjusted to give the surface such an inclination as to
result in the bubble being in the centre of the level. This operation
must be performed in respect of each bay both front and rear. The bays
must then be diagonally measured as already explained.

YET ANOTHER METHOD of finding the dihedral angle, and at the same time
the angle of incidence, is as follows:

A horizontal line is taken from underneath the butt of each spar,
and the set measurement is either the angle it makes with the spar,
or a fixed measurement from the line to the spar taken at a specified
distance from the butt. This operation must be performed in respect of
both main and rear spars, and all the bays must be measured diagonally
afterwards.

[Illustration]

Whichever method is used, be sure that after the job is done the spars
are perfectly straight.

STAGGER.--The stagger is the distance the top surface is in advance of
the bottom surface when the aeroplane is in flying position. The set
measurement is obtained as follows:

[Illustration]

Plumb-lines must be dropped over the leading edge of the top surface
wherever struts occur, and also near the fuselage. The set measurement
is taken from the front of the lower leading edge to the plumb-lines. It
makes a difference whether the measurement is taken along a horizontal
line (which can be found by using a straight-edge and a spirit-level) or
along a projection of the chord. The line along which the measurement
should be taken is laid down in the aeroplane's specifications.

If a mistake is made and the measurement taken along the wrong line, it
may result in a difference of perhaps 1/4 inch or more to the stagger,
with the certain result that the aeroplane will, in flight, be
nose-heavy or tail-heavy.

After the adjustments of the angles of incidence, dihedral, and stagger
have been secured, it is as well to confirm all of them, as, in making
the last adjustment, the first one may have been spoiled.

OVER-ALL ADJUSTMENTS.--The following over-all check measurements should
now be taken.

[Illustration: The dotted lines on the surface represent the spars
within it.]

The straight lines AC and BC should be equal to within 1/8 inch. The
point C is the centre of the propeller, or, in the case of a "pusher"
aeroplane, the centre of the nacelle. The points A and B are marked on
the main spar, and must in each case be the same distance from the butt
of the spar. The rigger should not attempt to make A and B merely the
sockets of the outer struts, as they may not have been placed quite
accurately by the manufacturer. The lines AC and BC must be taken from
both top and bottom spars--two measurements on each side of the
aeroplane.

The two measurements FD and FE should be equal to within 1/8 inch. F is
the centre of the fuselage or rudder-post. D and E are points marked on
both top and bottom rear spars, and each must be the same fixed distance
from the butt of the spar. Two measurements on each side of the
aeroplane.

If these over-all measurements are not correct, then it is probably due
to some of the drift or anti-drift wires being too tight or too slack.
It may possibly be due to the fuselage being out of truth, but of course
the rigger should have made quite sure that the fuselage was true before
rigging the rest of the machine. Again, it may be due to the internal
bracing wires within the lifting surfaces not being accurately adjusted,
but of course this should have been seen to before covering the surfaces
with fabric.

FUSELAGE.--The method of truing the fuselage is laid down in the
aeroplane's specifications. After it has been adjusted according to the
specified directions, it should then be arranged on trestles in such
a way as to make about three-quarters of it towards the tail stick
out unsupported. In this way it will assume a condition as near as
possible to flying conditions, and when it is in this position the set
measurements should be confirmed. If this is not done it may be out of
truth, but perhaps appear all right when supported by trestles at both
ends, as, in such case, its weight may keep it true as long as it is
resting upon the trestles.

THE TAIL-PLANE (EMPENNAGE).--The exact angle of incidence of the
tail-plane is laid down in the aeroplane's specifications. It is
necessary to make sure that the spars are horizontal when the aeroplane
is in flying position and the tail unsupported as explained above under
the heading of Fuselage. If the spars are tapered, then make sure that
their centre lines are horizontal.

UNDERCARRIAGE.--The undercarriage must be very carefully aligned as laid
down in the specifications.

1. The aeroplane must be placed in its flying position and sufficiently
high to ensure the wheels being off the ground when rigged. When in this
position the axle must be horizontal and the bracing wires adjusted to
secure the various set measurements stated in the specifications.

2. Make sure that the struts bed well down into their sockets.

3. Make sure that the shock absorbers are of equal tension. In the case
of rubber shock absorbers, both the number of turns and the lengths must
be equal.


HOW TO DIAGNOSE FAULTS IN FLIGHT, STABILITY, AND CONTROL.

DIRECTIONAL STABILITY will be badly affected if there is more drift
(_i.e._, resistance) on one side of the aeroplane than there is on the
other side. The aeroplane will tend to turn towards the side having the
most drift. This may be caused as follows:

1. The angle of incidence of the main surface or the tail surface may be
wrong. The greater the angle of incidence, the greater the drift. The
less the angle, the less the drift.

2. If the alignment of the fuselage, fin in front of the rudder, the
struts or stream-line wires, or, in the case of the Maurice Farman, the
front outriggers, are not absolutely correct--that is to say, if they
are turned a little to the left or to the right instead of being in line
with the direction of flight--then they will act as a rudder and cause
the aeroplane to turn off its course.

3. If any part of the surface is distorted, it will cause the aeroplane
to turn off its course. The surface is cambered, _i.e._, curved, to pass
through the air with the least possible drift. If, owing perhaps to the
leading edge, spars, or trailing edge becoming bent, the curvature is
spoiled, that will result in changing the amount of drift on one side of
the aeroplane, which will then have a tendency to turn off its course.

LATERAL INSTABILITY (FLYING ONE WING DOWN).--The only possible reason
for such a condition is a difference in the lifts of right and left
wings. That may be caused as follows:

1. The angle of incidence may be wrong. If it is too great, it will
produce more lift than on the other side of the aeroplane; and if too
small, it will produce less lift than on the other side--the result
being that, in either case, the aeroplane will try to fly one wing down.

2. _Distorted Surfaces._--If some part of the surface is distorted, then
its camber is spoiled, and the lift will not be the same on both sides
of the aeroplane, and that, of course, will cause it to fly one wing
down.

Longitudinal Instability may be due to the following reasons:

1. _The stagger may be wrong._ The top surface may have drifted back a
little owing to some of the wires, probably the incidence wires, having
elongated their loops or having pulled the fittings into the wood. If
the top surface is not staggered forward to the correct degree, then
consequently the whole of its lift is too far back, and it will then
have a tendency to lift up the tail of the machine too much. The
aeroplane would then be said to be "nose-heavy."

A 1/4-inch area in the stagger will make a very considerable difference
to the longitudinal stability.

2. If _the angle of incidence_ of the main surface is not right, it will
have a bad effect, especially in the case of an aeroplane with a lifting
tail-plane.

If the angle is too great, it will produce an excess of lift, and that
may lift up the nose of the aeroplane and result in a tendency to fly
"tail-down." If the angle is too small, it will produce a decreased
lift, and the aeroplane may have a tendency to fly "nose-down."

3. _The fuselage_ may have become warped upward or downward, thus giving
the tail-plane an incorrect angle of incidence. If it has too much
angle, it will lift too much, and the aeroplane will be "nose-heavy." If
it has too little angle, then it will not lift enough, and the aeroplane
will be "tail-heavy."

4. (The least likely reason.) _The tail-plane_ may be mounted upon
the fuselage at a wrong angle of incidence, in which case it must
be corrected. If nose-heavy, it should be given a smaller angle of
incidence. If tail-heavy, it should be given a larger angle; but
care should be taken not to give it too great an angle, because the
longitudinal stability entirely depends upon the tail-plane being set
at a much smaller angle of incidence than is the main surface, and
if that difference is decreased too much, the aeroplane will become
uncontrollable longitudinally. Sometimes the tail-plane is mounted on
the aeroplane at the same angle as the main surface, but it actually
engages the air at a lesser angle, owing to the air being deflected
downwards by the main surface. There is then, in effect, a longitudinal
dihedral as explained and illustrated in Chapter I.

CLIMBS BADLY.--Such a condition is, apart from engine or propeller
trouble, probably due to (1) distorted surfaces, or (2) too small an
angle of incidence.

FLIGHT SPEED POOR.--Such a condition is, apart from engine or propeller
trouble, probably due to (1) distorted surfaces, (2) too great an angle
of incidence, or (3) dirt or mud, and consequently excessive
skin-friction.

INEFFICIENT CONTROL is probably due to (1) wrong setting of control
surfaces, (2) distortion of control surfaces, or (3) control cables
being badly tensioned.

WILL NOT "TAXI" STRAIGHT.--If the aeroplane is uncontrollable on the
ground, it is probably due to (1) alignment of undercarriage being
wrong, or (2) unequal tension of shock absorbers.




CHAPTER IV

THE PROPELLER, OR "AIR-SCREW"


The sole object of the propeller is to translate the power of the engine
into thrust.

The propeller screws through the air, and its blades, being set at an
angle inclined to the direction of motion, secure a reaction, as in the
case of the aeroplane's lifting surface.

This reaction may be conveniently divided into two component parts or
values, namely, Thrust and Drift (see illustration overleaf).

The Thrust is opposed to the Drift of the aeroplane, and must be equal
and opposite to it at flying speed. If it falls off in power, then the
flying speed must decrease to a velocity, at which the aeroplane drift
equals the decreased thrust. The Drift of the propeller may be
conveniently divided into the following component values:

_Active Drift_, produced by the useful thrusting part of the propeller.

_Passive Drift_, produced by all the rest of the propeller, _i.e._, by
its detrimental surface.

_Skin-Friction_, produced by the friction of the air with roughness of
surface.

_Eddies_ attending the movement of the air caused by the action of the
propeller.

_Cavitation_ (very marked at excessive speed of revolution). A tendency
of the propeller to produce a cavity or semi-vacuum in which it
revolves, the thrust decreasing with increase of speed and cavitation.

THRUST-DRIFT RATIO.--The proportion of thrust to drift is of paramount
importance, for it expresses the efficiency of the propeller. It is
affected by the following factors:

_Speed of Revolution._--The greater the speed, the greater the
proportion of drift to thrust. This is due to the increase with speed of
the passive drift, which carries with it no increase in thrust. For this
reason propellers are often geared down to revolve at a lower speed than
that of the engine.

_Angle of Incidence._--The same reasons as in the case of the aeroplane
surface.

_Aspect Ratio._--Ditto.

_Camber._--Ditto.

[Illustration:
  M, Direction of motion of propeller (rotary).
  R, Direction of reaction.
  T, Direction of thrust.
 AD, Direction of the resistance of the air to the passage of the
     aeroplane, _i.e._, aeroplane drift.
  D, Direction of propeller drift (rotary).
  P, Engine power, opposed to propeller drift and transmitted to
     the propeller through the propeller shaft.]

In addition to the above factors there are, when it comes to actually
designing a propeller, mechanical difficulties to consider. For
instance, the blades must be of a certain strength and consequent
thickness. That, in itself, limits the aspect ratio, for it will
necessitate a chord long enough in proportion to the thickness to make
a good camber possible. Again, the diameter of the propeller must be
limited, having regard to the fact that greater diameters than those
used to-day would not only result in excessive weight of construction,
but would also necessitate a very high undercarriage to keep the
propeller off the ground, and such undercarriage would not only produce
excessive drift, but would also tend to make the aeroplane stand on
its nose when alighting. The latter difficulty cannot be overcome by
mounting the propeller higher, as the centre of its thrust must be
approximately coincident with the centre of aeroplane drift.


MAINTENANCE OF EFFICIENCY.

The following conditions must be observed:

1. PITCH ANGLE.--The angle, at any given point on the propeller, at
which the blade is set is known as the pitch angle, and it must be
correct to half a degree if reasonable efficiency is to be maintained.

This angle secures the "pitch," which is the distance the propeller
advances during one revolution, supposing the air to be solid. The air,
as a matter of fact, gives back to the thrust of the blades just as
the pebbles slip back as one ascends a shingle beach. Such "give-back"
is known as _Slip_. If a propeller has a pitch of, say, 10 feet, but
actually advances, say, only 8 feet owing to slip, then it will be said
to possess 20 per cent. slip.

Thus, the pitch must equal the flying speed of the aeroplane plus
the slip of the propeller. For example, let us find the pitch of
a propeller, given the following conditions:

  Flying speed          ... 70 miles per hour.
  Propeller revolutions ... 1,200 per minute.
  Slip                  ... 15 per cent.

First find the distance in feet the aeroplane will travel forward in one
minute. That is--

    369,600 feet (70 miles)
    ----------------------- = 6,160 feet per minute.
         60   "  (minutes)

Now divide the feet per minute by the propeller revolutions per minute,
add 15 per cent. for the slip, and the result will be the propeller
pitch:

    6,160
    ----- + 15 per cent. = 5.903 feet.
    1,200

In order to secure a constant pitch from root to tip of blade, the pitch
angle decreases towards the tip. This is necessary, since the end of the
blade travels faster than its root, and yet must advance forward at the
same speed as the rest of the propeller. For example, two men ascending
a hill. One prefers to walk fast and the other slowly, but they wish to
arrive at the top of the hill simultaneously. Then the fast walker must
travel a farther distance than the slow one, and his angle of path
(pitch angle) must then be smaller than the angle of path taken by the
slow walker. Their pitch angles are different, but their pitch (in this
case altitude reached in a given time) is the same.

[Illustration]

In order to test the pitch angle, the propeller must be mounted upon
a shaft at right angles to a beam the face of which must be perfectly
level, thus:

[Illustration]

First select a point on the blade at some distance (say about 2 feet)
from the centre of the propeller. At that point find, by means of a
protractor, the angle a projection of the chord makes with the face of
the beam. That angle is the pitch angle of the blade at that point.

Now lay out the angle on paper, thus:

[Illustration]

The line above and parallel to the circumference line must be placed
in a position making the distance between the two lines equal to the
specified pitch, which is, or should be, marked upon the boss of the
propeller.

Now find the circumference of the propeller where the pitch angle is
being tested. For example, if that place is 2 feet radius from the
centre, then the circumference will be 2 feet x 2 = 4 feet diameter,
which, if multiplied by 3.1416 = 15.56 feet circumference.

Now mark off the circumference distance, which is represented above by
A--B, and reduce it in scale for convenience.

The distance a vertical line makes between B and the chord line is
the pitch at the point where the angle is being tested, and it should
coincide with the specified pitch.

You will note, from the above illustration, that the actual pitch line
should meet the junction of the chord line and top line.

The propeller should be tested at several points, about a foot apart, on
each blade; and the diagram, provided the propeller is not faulty, will
then look like this:

[Illustration:
  A, B, C, and D, Actual pitch at points tested.
  I, Pitch angle at point tested nearest to centre of propeller.
  E, Circumference at I.
  J, Pitch angle at point tested nearest to I.
  F, Circumference at J.
  K, Pitch angle at next point tested.
  G, Circumference at K.
  L, Pitch angle tested at point nearest tip of blade.
  H, Circumference at L.]

At each point tested the actual pitch coincides with the specified
pitch: a satisfactory condition.

A faulty propeller will produce a diagram something like this:

[Illustration]

At every point tested the pitch angle is wrong, for nowhere does the
actual pitch coincide with the specified pitch. Angles A, C, and D,
are too large, and B is too small. The angle should be correct to half
a degree if reasonable efficiency is to be maintained.

A fault in the pitch angle may be due to (1) faulty manufacture, (2)
distortion, or (3) the shaft hole through the boss being out of
position.

2. STRAIGHTNESS.--To test for straightness the propeller must be mounted
upon a shaft. Now bring the tip of one blade round to graze some fixed
object. Mark the point it grazes. Now bring the other tip round, and it
should come within 1/8 inch of the mark. If it does not do so, it is due
to (1) faulty manufacture, (2) distortion, or (3) to the hole through
the boss being out of position.

3. LENGTH.--The blades should be of equal length to 1/16 inch.

4. BALANCE.--The usual method of testing a propeller for balance is as
follows: Mount it upon a shaft, which must be on ball-bearings. Place
the propeller in a horizontal position, and it should remain in that
position. If a weight of a trifle over an ounce placed in a bolt-hole on
one side of the boss fails to disturb the balance, then the propeller is
usually regarded as unfit for use.

[Illustration]

The above method is rather futile, as it does not test for the balance
of centrifugal force, which comes into play as soon as the propeller
revolves. It can be tested as follows:

[Illustration]

The propeller must be in a horizontal position, and then weighed at
fixed points, such as A, B, C, D, E, and F, and the weights noted. The
points A, B, and C must, of course, be at the same fixed distances from
the centre of the propeller as the points D, E, and F. Now reverse the
propeller and weigh at each point again. Note the results. The first
series of weights should correspond to the second series, thus:

Weight A should equal weight F.

Weight B should equal weight E.

Weight C should equal weight D.

There is no standard practice as to the degree of error permissible, but
if there are any appreciable differences the propeller is unfit for use.

5. SURFACE AREA.--The surface area of the blades should be equal. Test
with calipers thus:

[Illustration]

The distance A--B should equal K--L.

The distance C--D should equal I--J.

The distance E--F should equal G--H.

The points between which the distances are taken must, of course, be at
the same distance from the centre in the case of each blade.

There is no standard practice as to the degree of error permissible. If,
however, there is an error of over 1/8 inch, the propeller is really
unfit for use.

6. CAMBER.--The camber (curvature) of the blades should be (1) equal,
(2) decrease evenly towards the tips of the blades, and (3) the greatest
depth of the curve should, at any point of the blade, be approximately
at the same percentage of the chord from the leading edge as at other
points.

It is difficult to test the top camber without a set of templates,[18]
but a fairly accurate idea of the concave camber can be secured by
slowly passing a straight-edge along the blade, thus:

[Illustration]

The camber can now be easily seen, and as the straight-edge is passed
along the blade, the observer should look for any irregularities of the
curvature, which should gradually and evenly decrease towards the tip of
the blade.

7. THE JOINTS.--The usual method for testing the glued joints is by
revolving the propeller at greater speed than it will be called upon to
make during flight, and then carefully examining the joints to see if
they have opened. It is not likely, however, that the reader will have
the opportunity of making this test. He should, however, examine all the
joints very carefully, trying by hand to see if they are quite sound.
Suspect a propeller of which the joints appear to hold any thickness of
glue. Sometimes the joints in the boss open a little, but this is not
dangerous unless they extend to the blades, as the bolts will hold the
laminations together.

8. CONDITION OF SURFACE.--The surface should be very smooth, especially
towards the tips of the blades. Some propeller tips have a speed of over
30,000 feet a minute, and any roughness will produce a bad drift or
resistance and lower the efficiency.

9. MOUNTING.--Great care should be taken to see that the propeller
is mounted quite straight on its shaft. Test in the same way as for
straightness. If it is not straight, it is possibly due to some of the
propeller bolts being too slack or to others having been pulled up too
tightly.

FLUTTER.--Propeller "flutter," or vibration, may be due to faulty pitch
angle, balance, camber, surface area, or to bad mounting. It causes a
condition sometimes mistaken for engine trouble, and one which may
easily lead to the collapse of the propeller.

CARE OF PROPELLERS.--The care of propellers is of the greatest
importance, as they become distorted very easily.

1. Do not store them in a very damp or a very dry place.

2. Do not store them where the sun will shine upon them.

3. Never leave them long in a horizontal position or leaning up
against a wall.

4. They should be hung on horizontal pegs, and the position of
the propellers should be vertical.

If the points I have impressed upon you in these notes are not attended
to, you may be sure of the following results:

1. Lack of efficiency, resulting in less aeroplane speed and climb
than would otherwise be the case.

2. Propeller "flutter" and possible collapse.

3. A bad stress upon the propeller shaft and its bearings.

TRACTOR.--A propeller mounted in front of the main surface.

PUSHER.--A propeller mounted behind the main surface.

FOUR-BLADED PROPELLERS.--Four-bladed propellers are suitable only when
the pitch is comparatively large. For a given pitch, and having regard
to "interference," they are not so efficient as two-bladed propellers.

[Illustration:
  SPIRAL COURSES OF TWO-BLADE TIPS.
  SPIRAL COURSES OF FOUR-BLADE TIPS.
  Pitch the same in each case.]

The smaller the pitch, the less the "gap," _i.e._, the distance,
measured in the direction of the thrust, between the spiral courses of
the blades (see illustration on preceding page).

If the gap is too small, then the following blade will engage air which
the preceding blade has put into motion, with the result that the
following blade will not secure as good a reaction as would otherwise be
the case. It is very much the same as in the case of the aeroplane gap.

For a given pitch, the gap of a four-bladed propeller is only half
that of a two-bladed one. Therefore the four-bladed propeller is only
suitable for large pitch, as such pitch produces spirals with a large
gap, thus offsetting the decrease in gap caused by the numerous blades.

The greater the speed of rotation, the less the pitch for a given
aeroplane speed. Then, in order to secure a large pitch and consequently
a good gap, the four-bladed propeller is usually geared to rotate at a
lower speed than would be the case if directly attached to the engine
crank-shaft.

[Footnote 18: I have heard of temporary ones being made quickly by
bending strips of lead over the convex side of the blade, but I should
think it very difficult to secure a sufficient degree of accuracy in
that way.]




CHAPTER V

MAINTENANCE


CLEANLINESS.--The fabric must be kept clean and free from oil, as that
will rot it. To take out dirt or oily patches, try acetone. If that will
not remedy matters, then try petrol, but use it sparingly, as otherwise
it will take off an unnecessary amount of dope. If that will not remove
the dirt, then hot water and soap will do so, but, in that case, be
sure to use soap having no alkali in it, as otherwise it may injure the
fabric. Use the water sparingly, or it may get inside the planes and
rust the internal bracing wires, or cause some of the wooden framework
to swell.

The wheels of the undercarriage have a way of throwing up mud on to
the lower surface. This should, if possible, be taken off while wet.
It should never be scraped off when dry, as that may injure the fabric.
If dry, then it should be moistened before being removed.

Measures should be taken to prevent dirt from collecting upon any
part of the aeroplane, as, otherwise, excessive skin-friction will be
produced with resultant loss of flight speed. The wires, being greasy,
collect dirt very easily.

CONTROL CABLES.--After every flight the rigger should pass his hand over
the control cables and carefully examine them near pulleys. Removal of
grease may be necessary to make a close inspection possible. If only one
strand is broken the wire should be replaced. Do not forget the aileron
balance wire on the top surface.

Once a day try the tension of the control cables by smartly moving the
control levers about as explained elsewhere.

WIRES.--All the wires should be kept well greased or oiled, and in the
correct tension. When examining the wires, it is necessary to place the
aeroplane on level ground, as otherwise it may be twisted, thus throwing
some wires into undue tension and slackening others. The best way, if
there is time, is to pack the machine up into its "flying position."

If you see a slack wire, do not jump to the conclusion that it must
be tensioned. Perhaps its opposition wire is too tight, in which case
slacken it, and possibly you will find that will tighten the slack wire.

Carefully examine all wires and their connections near the propeller,
and be sure that they are snaked round with safety wire, so that the
latter may keep them out of the way of the propeller if they come
adrift.

The wires inside the fuselage should be cleaned and regreased about once
a fortnight.

STRUTS AND SOCKETS.--These should be carefully examined to see if any
splitting has occurred.

DISTORTION.--Carefully examine all surfaces, including the controlling
surfaces, to see whether any distortion has occurred. If distortion can
be corrected by the adjustment of wires, well and good; but if not, then
some of the internal framework probably requires replacement.

ADJUSTMENTS.--Verify the angles of incidence, dihedral, and stagger, and
the rigging position of the controlling surfaces, as often as possible.

UNDERCARRIAGE.--Constantly examine the alignment and fittings of the
undercarriage, and the condition of tyres and shock absorbers. The
latter, when made of rubber, wear quickest underneath. Inspect axles and
skids to see if there are any signs of them becoming bent. The wheels
should be taken off occasionally and greased.

LOCKING ARRANGEMENTS.--Constantly inspect the locking arrangements of
turnbuckles, bolts, etc. Pay particular attention to the control cable
connections, and to all moving parts in respect of the controls.

LUBRICATION.--Keep all moving parts, such as pulleys, control levers,
and hinges of controlling surfaces, well greased.

SPECIAL INSPECTION.--Apart from constantly examining the aeroplane with
reference to the above points I have made, I think that, in the case of
an aeroplane in constant use, it is an excellent thing to make a special
inspection of every part, say, once a week. This will take from two to
three hours according to the type of aeroplane. In order to carry it out
methodically, the rigger should have a list of every part down to the
smallest split-pin. He can then check the parts as he examines them,
and nothing will be passed over. This, I know from experience, greatly
increases the confidence of the pilot, and tends to produce good work
in the air.

WINDY WEATHER.--The aeroplane, when on the ground, should face the
wind; and it is advisable to lash the control lever fast, so that the
controlling surfaces may not be blown about and possibly damaged.

"VETTING" BY EYE.--This should be practised at every opportunity, and,
if persevered in, it is possible to become quite expert in diagnosing
by eye faults in flight efficiency, stability, and control.

The aeroplane should be standing upon level ground, or, better than
that, packed up into its "flying position."

Now stand in front of it and line up the leading edge with the main
spar, rear spar, and trailing edge. Their shadows can usually be seen
through the fabric. Allowance must, of course, be made for wash-in and
wash-out; otherwise, the parts I have specified should be parallel with
each other.

Now line up the centre part of the main-plane with the tail-plane. The
latter should be symmetrical with it. Next, sight each interplane front
strut with its rear strut. They should be parallel.

Then, standing on one side of the aeroplane, sight all the front struts.
The one nearest to you should cover all the others. This applies to the
rear struts also.

Look for distortion of leading edges, main and rear spars, trailing
edges, tail-plane, and controlling surfaces.

This sort of thing, if practised constantly, will not only develop
an expert eye for diagnosis of faults, but will also greatly assist in
impressing upon the memory the characteristics and possible troubles
of the various types of aeroplanes.

MISHANDLING ON THE GROUND.--This is the cause of a lot of unnecessary
damage. The golden rule to observe is, PRODUCE NO BENDING STRESSES.

Nearly all the wood in an aeroplane is designed to take merely the
stress of direct compression, and it cannot be bent safely. Therefore,
in packing an aeroplane up from the ground, or in pulling or pushing it
about, be careful to stress it in such a way as to produce, as far as
possible, only direct compression stresses. For instance, if it is
necessary to support the lifting surface, then the packing should be
arranged to come directly under the struts so that they may take the
stress in the form of compression for which they are designed. Such
supports should be covered with soft packing in order to prevent the
fabric from becoming damaged.

When pulling an aeroplane along, if possible, pull from the top of the
undercarriage struts. If necessary to pull from elsewhere, then do so by
grasping the interplane struts as low down as possible. Never pull by
means of wires.

Never lay fabric-covered parts upon a concrete floor. Any slight
movement will cause the fabric to scrape over the floor with resultant
damage.

Struts, spars, etc., should never be left about the floor, as in such
position they are likely to become scored. I have already explained the
importance of protecting the outside fibres of the wood. Remember also
that wood becomes distorted easily. This particularly applies to
interplane struts. If there are no proper racks to stand them in, then
the best plan is to lean them up against the wall in as near a vertical
position as possible.

TIME.--Learn to know the time necessary to complete any of the various
rigging jobs. This is really important. Ignorance of this will lead
to bitter disappointments in civil life; and, where Service flying is
concerned, it will, to say the least of it, earn unpopularity with
senior officers, and fail to develop respect and good work where men
are concerned.

THE AEROPLANE SHED.--This should be kept as clean and orderly as
possible. A clean, smart shed produces briskness, energy, and pride of
work. A dirty, disorderly shed nearly always produces slackness and poor
quality of work, lost tools, and mislaid material.

[Illustration]

[Illustration]




GLOSSARY

_The numbers at the right-hand side of the page indicate the parts
numbered in the preceding diagrams._


=Aeronautics=--The science of aerial navigation.

=Aerofoil=--A rigid structure, of large superficial area relative to
its thickness, designed to obtain, when driven through the air at an
angle inclined to the direction of motion, a reaction from the air
approximately at right angles to its surface. Always cambered when
intended to secure a reaction in one direction only. As the term
"aerofoil" is hardly ever used in practical aeronautics, I have,
throughout this book, used the term SURFACE, which, while academically
incorrect, since it does not indicate thickness, is the term usually
used to describe the cambered lifting surfaces, _i.e._, the "planes"
or "wings," and the stabilizers and the controlling aerofoils.

=Aerodrome=--The name usually applied to a ground used for the practice
of aviation. It really means "flying machine," but is never used in that
sense nowadays.

=Aeroplane=--A power-driven aerofoil fitted with stabilizing and
controlling surfaces.

=Acceleration=--The rate of change of velocity.

=Angle of Incidence=--The angle at which the "neutral lift line" of
a surface attacks the air.

=Angle of Incidence, Rigger's=--The angle the chord of a surface makes
with a line parallel to the axis of the propeller.

=Angle of Incidence, Maximum=--The greatest angle of incidence at which,
for a given power, surface (including detrimental surface), and weight,
horizontal flight can be maintained.

=Angle of Incidence, Minimum=--The smallest angle of incidence at which,
for a given power, surface (including detrimental surface), and weight,
horizontal flight can be maintained.

=Angle of Incidence, Best Climbing=--That angle of incidence at which an
aeroplane ascends quickest. An angle approximately halfway between the
maximum and optimum angles.

=Angle of Incidence, Optimum=--The angle of incidence at which the
lift-drift ratio is the highest.

=Angle, Gliding=--The angle between the horizontal and the path along
which an aeroplane, at normal flying speed, but not under engine power,
descends in still air.

=Angle, Dihedral=--The angle between two planes.

=Angle, Lateral Dihedral=--The lifting surface of an aeroplane is said
to be at a lateral dihedral angle when it is inclined upward towards its
wing-tips.

=Angle, Longitudinal Dihedral=--The main surface and tail surface are
said to be at a longitudinal dihedral angle when the projections of their
neutral lift lines meet and produce an angle above them.

=Angle, Rigger's Longitudinal Dihedral=--Ditto, but substituting "chords"
for "neutral lift lines."

=Angle, Pitch=--The angle at any given point of a propeller, at which
the blade is inclined to the direction of motion when the propeller is
revolving but the aeroplane stationary.

=Altimeter=--An instrument used for measuring height.

=Air-Speed Indicator=--An instrument used for measuring air pressures or
velocities. It consequently indicates whether the surface is securing
the requisite reaction for flight. Usually calibrated in miles per hour,
in which case it indicates the correct number of miles per hour at only
one altitude. This is owing to the density of the air decreasing with
increase of altitude and necessitating a greater speed through space to
secure the same air pressure as would be secured by less speed at a
lower altitude. It would be more correct to calibrate it in units of air
pressure. [1]

=Air Pocket=--A local movement or condition of the air causing an
aeroplane to drop or lose its correct attitude.

=Aspect-Ratio=--The proportion of span to chord of a surface.

=Air-Screw (Propeller)=--A surface so shaped that its rotation about an
axis produces a force (thrust) in the direction of its axis. [2]

=Aileron=--A controlling surface, usually situated at the wing-tip,
the operation of which turns an aeroplane about its longitudinal axis;
causes an aeroplane to tilt sideways. [3]

=Aviation=--The art of driving an aeroplane.

=Aviator=--The driver of an aeroplane.

=Barograph=--A recording barometer, the charts of which can be calibrated
for showing air density or height.

=Barometer=--An instrument used for indicating the density of air.

=Bank, to=--To turn an aeroplane about its longitudinal axis (to tilt
sideways) when turning to left or right.

=Biplane=--An aeroplane of which the main lifting surface consists of a
surface or pair of wings mounted above another surface or pair of wings.

=Bay=--The space enclosed by two struts and whatever they are fixed to.

=Boom=--A term usually applied to the long spars joining the tail of a
"pusher" aeroplane to its main lifting surface. [4]

=Bracing=--A system of struts and tie wires to transfer a force from one
point to another.

=Canard=--Literally "duck." The name which was given to a type of
aeroplane of which the longitudinal stabilizing surface (_empennage_)
was mounted in front of the main lifting surface. Sometimes termed
"tail-first" aeroplanes, but such term is erroneous, as in such a design
the main lifting surface acts as, and is, the _empennage_.

=Cabre=--To fly or glide at an excessive angle of incidence; tail down.

=Camber=--Curvature.

=Chord=--Usually taken to be a straight line between the trailing and
leading edges of a surface.

=Cell=--The whole of the lower surface, that part of the upper surface
directly over it, together with the struts and wires holding them
together.

=Centre (Line) of Pressure=--A line running from wing-tip to wing-tip,
and through which all the air forces acting upon the surface may be
said to act, or about which they may be said to balance.

=Centre (Line) of Pressure, Resultant=--A line transverse to the
longitudinal axis, and the position of which is the resultant of the
centres of pressure of two or more surfaces.

=Centre of Gravity=--The centre of weight.

=Cabane=--A combination of two pylons, situated over the fuselage, and
from which the anti-lift wires are suspended. [5]

=Cloche=--Literally "bell." Is applied to the bell-shaped construction
which forms the lower part of the pilot's control lever in a Bleriot
monoplane, and to which the control cables are attached.

=Centrifugal Force=--Every body which moves in a curved path is urged
outwards from the centre of the curve by a force termed "centrifugal."

=Control Lever=--A lever by means of which the controlling surfaces are
operated. It usually operates the ailerons and elevator. The
"joy-stick." [6]

=Cavitation, Propeller=--The tendency to produce a cavity in the air.

=Distance Piece=--A long, thin piece of wood (sometimes tape) passing
through and attached to all the ribs in order to prevent them from
rolling over sideways. [7]

=Displacement=--Change of position.

=Drift= (_of an aeroplane as distinct from the propeller_)--The horizontal
component of the reaction produced by the action of driving through the
air a surface inclined upwards and towards its direction of motion
_plus_ the horizontal component of the reaction produced by the
"detrimental" surface _plus_ resistance due to "skin-friction."
Sometimes termed "head-resistance."

=Drift, Active=--Drift produced by the lifting surface.

=Drift, Passive=--Drift produced by the detrimental surface.

=Drift= (_of a propeller_)--Analogous to the drift of an aeroplane.
It is convenient to include "eddies" and "cavitation" within this term.

=Drift, to=--To be carried by a current of air; to make leeway.

=Dive, to=--To descend so steeply as to produce a speed greater than the
normal flying speed.

=Dope, to=--To paint a fabric with a special fluid for the purpose of
tightening and protecting it.

=Density=--Mass of unit volume; for instance, pounds per cubic foot.

=Efficiency=--

    Output
    ------
    Input.

=Efficiency= (_of an aeroplane as distinct from engine and propeller_)--

         Lift and Velocity
    ---------------------------
    Thrust (= aeroplane drift).

=Efficiency, Engine=--

      Brake horse-power
    ----------------------
    Indicated horse-power.

=Efficiency, Propeller=--

           Thrust horse-power
    --------------------------------
    Horse-power received from engine
          (= propeller drift).

  NOTE.--The above terms can, of course, be expressed in foot-pounds. It
  is then only necessary to divide the upper term by the lower one to find
  the measure of efficiency.

=Elevator=--A controlling surface, usually hinged to the rear of the
tail-plane, the operation of which turns an aeroplane about an axis
which is transverse to the direction of normal horizontal flight. [8]

=Empennage=--See "Tail-plane."

=Energy=--Stored work. For instance, a given weight of coal or petroleum
stores a given quantity of energy which may be expressed in foot-pounds.

=Extension=--That part of the upper surface extending beyond the span of
the lower surface. [9]

=Edge, Leading=--The front edge of a surface relative to its normal
direction of motion. [10]

=Edge, Trailing=--The rear edge of a surface relative to its normal
direction of motion. [11]

=Factor of Safety=--Usually taken to mean the result found by dividing
the stress at which a body will collapse by the maximum stress it will be
called upon to bear.

=Fineness= (_of stream-line_)--The proportion of length to maximum width.

=Flying Position=--A special position in which an aeroplane must be placed
when rigging it or making adjustments. It varies with different types of
aeroplanes. Would be more correctly described as "rigging position."

=Fuselage=--That part of an aeroplane containing the pilot, and to which
is fixed the tail-plane. [12]

=Fin=--Additional keel-surface, usually mounted at the rear of an
aeroplane. [13]

=Flange= (_of a rib_)--That horizontal part of a rib which prevents it
from bending sideways. [14]

=Flight=--The sustenance of a body heavier than air by means of its action
upon the air.

=Foot-pound=--A measure of work representing the weight of 1 lb. raised
1 foot.

=Fairing=--Usually made of thin sheet aluminium, wood, or a light
construction of wood and fabric; and bent round detrimental surface in
order to give it a "fair" or "stream-like" shape. [15]

=Gravity=--Is the force of the Earth's attraction upon a body. It
decreases with increase of distance from the Earth. See "Weight."

=Gravity, Specific=--

    Density of substance
    --------------------
      Density of water.

    Thus, if the density of water is 10 lb. per unit volume, the same
    unit volume of petrol, if weighing 7 lb., would be said to have a
    specific gravity of 7/10, _i.e._, 0.7.

=Gap= (_of an aeroplane_)--The distance between the upper and lower
surfaces of a biplane. In a triplane or multiplane, the distance between
any two of its surfaces. [16]

=Gap, Propeller=--The distance, measured in the direction of the thrust,
between the spiral courses of the blades.

=Girder=--A structure designed to resist bending, and to combine lightness
and strength.

=Gyroscope=--A heavy circular wheel revolving at high speed, the effect of
which is a tendency to maintain its plane of rotation against disturbing
forces.

=Hangar=--An aeroplane shed.

=Head-resistance=--Drift. The resistance of the air to the passage of
a body.

=Helicopter=--An air-screw revolving about a vertical axis, the direction
of its thrust being opposed to gravity.

=Horizontal Equivalent=--The plan view of a body whatever its attitude
may be.

=Impulse=--A force causing a body to gain or lose momentum.

=Inclinometer=--A curved form of spirit-level used for indicating the
attitude of a body relative to the horizontal.

=Instability=--An inherent tendency of a body, which, if the body is
disturbed, causes it to move into a position as far as possible away
from its first position.

=Instability, Neutral=--An inherent tendency of a body to remain in the
position given it by the force of a disturbance, with no tendency to
move farther or to return to its first position.

=Inertia=--The inherent resistance to displacement of a body as distinct
from resistance the result of an external force.

=Joy-Stick=--See "Control Lever."

=Keel-Surface=--Everything to be seen when viewing an aeroplane from the
side of it.

=King-Post=--A bracing strut; in an aeroplane, usually passing through a
surface and attached to the main spar, and from the end or ends of which
wires are taken to spar, surface, or other part of the construction in
order to prevent distortion. When used in connection with a controlling
surface, it usually performs the additional function of a lever, control
cables connecting its ends with the pilot's control lever. [17]

=Lift=--The vertical component of the reaction produced by the action
of driving through the air a surface inclined upwards and towards its
direction of motion.

=Lift, Margin of=--The height an aeroplane can gain in a given time and
starting from a given altitude.

=Lift-Drift Ratio=--The proportion of lift to drift.

=Loading=--The weight carried by an aerofoil. Usually expressed in pounds
per square foot of superficial area.

=Longeron=--The term usually applied to any long spar running length-ways
of a fuselage. [18]

=Mass=--The mass of a body is a measure of the quantity of material in it.

=Momentum=--The product of the mass and velocity of a body is known as
"momentum."

=Monoplane=--An aeroplane of which the main lifting surface consists of
one surface or one pair of wings.

=Multiplane=--An aeroplane of which the main lifting surface consists of
numerous surfaces or pairs of wings mounted one above the other.

=Montant=--Fuselage strut.

=Nacelle=--That part of an aeroplane containing the engine and/or pilot
and passenger, and to which the tail-plane is not fixed. [19]

=Neutral Lift Line=--A line taken through a surface in a forward direction
relative to its direction of motion, and starting from its trailing
edge. If the attitude of the surface is such as to make the said line
coincident with the direction of motion, it results in no lift, the
reaction then consisting solely of drift. The position of the neutral
lift line, _i.e._, the angle it makes with the chord, varies with
differences of camber, and it is found by means of wind-tunnel research.

=Newton's Laws of Motion=--1. If a body be at rest, it will remain at
rest; or, if in motion, it will move uniformly in a straight line until
acted upon by some force.

2. The rate of change of the quantity of motion (momentum) is
proportional to the force which causes it, and takes place in the
direction of the straight line in which the force acts. If a body be
acted upon by several forces, it will obey each as though the others
did not exist, and this whether the body be at rest or in motion.

3. To every action there is opposed an equal and opposite reaction.

=Ornithopter (or Orthopter)=--A flapping wing design of aircraft intended
to imitate the flight of a bird.

=Outrigger=--This term is usually applied to the framework connecting the
main surface with an elevator placed in advance of it. Sometimes applied
to the "tail-boom" framework connecting the tail-plane with the main
lifting surface. [20]

=Pancake, to=--To "stall."

=Plane=--This term is often applied to a lifting surface. Such application
is not quite correct, since "plane" indicates a flat surface, and the
lifting surfaces are always cambered.

=Propeller=--See "Air-Screw."

=Propeller, Tractor=--An air-screw mounted in front of the main lifting
surface.

=Propeller, Pusher=--An air-screw mounted behind the main lifting surface.

=Pusher=--An aeroplane of which the propeller is mounted behind the main
lifting surface.

=Pylon=--Any V-shaped construction from the point of which wires are
taken.

=Power=--Rate of working. [21]

=Power, Horse=--One horse-power represents a force sufficient to raise
33,000 lb. 1 foot in a minute.

=Power, Indicated Horse=--The I.H.P. of an engine is a measure of the
rate at which work is done by the pressure upon the piston or pistons,
as distinct from the rate at which the engine does work. The latter
is usually termed "brake horse-power," since it may be measured by an
absorption brake.

=Power, Margin of=--The available quantity of power above that necessary
to maintain horizontal flight at the optimum angle.

=Pitot Tube=--A form of air-speed indicator consisting of a tube with open
end facing the wind, which, combined with a static pressure or suction
tube, is used in conjunction with a gauge for measuring air pressures or
velocities. (_No. 1 in diagram._)

=Pitch, Propeller=--The distance a propeller advances during one
revolution supposing the air to be solid.

=Pitch, to=--To plunge nose-down.

=Reaction=--A force, equal and opposite to the force of the action
producing it.

=Rudder=--A controlling surface, usually hinged to the tail, the operation
of which turns an aeroplane about an axis which is vertical in normal
horizontal flight; causes an aeroplane to turn to left or right of the
pilot. [22]

=Roll, to=--To turn about the longitudinal axis.

=Rib, Ordinary=--A light curved wooden part mounted in a fore and aft
direction within a surface. The ordinary ribs give the surface its
camber, carry the fabric, and transfer the lift from the fabric to the
spars. [23]

=Rib, Compression=--Acts as an ordinary rib, besides bearing the stress of
compression produced by the tension of the internal bracing wires. [24]

=Rib, False=--A subsidiary rib, usually used to improve the camber of the
front part of the surface. [25]

=Right and Left Hand=--Always used relative to the position of the pilot.
When observing an aeroplane from the front of it, the right hand side of
it is then on the left hand of the observer.

=Remou=--A local movement or condition of the air which may cause
displacement of an aeroplane.

=Rudder-Bar=--A control lever moved by the pilot's feet, and operating
the rudder. [26]

=Surface=--See "Aerofoil."

=Surface, Detrimental=--All exterior parts of an aeroplane including
the propeller, but excluding the (aeroplane) lifting and (propeller)
thrusting surfaces.

=Surface, Controlling=--A surface the operation of which turns an
aeroplane about one of its axes.

=Skin-Friction=--The friction of the air with roughness of surface. A form
of drift.

=Span=--The distance from wing-tip to wing-tip.

=Stagger=--The distance the upper surface is forward of the lower surface
when the axis of the propeller is horizontal.

=Stability=--The inherent tendency of a body, when disturbed, to return to
its normal position.

=Stability, Directional=--The stability about an axis which is vertical
during normal horizontal flight, and without which an aeroplane has no
natural tendency to remain upon its course.

=Stability, Longitudinal=--The stability of an aeroplane about an axis
transverse to the direction of normal horizontal flight, and without
which it has no tendency to oppose pitching and tossing.

=Stability, Lateral=--The stability of an aeroplane about its longitudinal
axis, and without which it has no tendency to oppose sideways rolling.

=Stabilizer=--A surface, such as fin or tail-plane, designed to give an
aeroplane inherent stability.

=Stall, to=--To give or allow an aeroplane an angle of incidence greater
than the "maximum" angle, the result being a fall in the lift-drift
ratio, the lift consequently becoming less than the weight of the
aeroplane, which must then fall, _i.e._, "stall" or "pancake."

=Stress=--Burden or load.

=Strain=--Deformation produced by stress.

=Side-Slip, to=--To fall as a result of an excessive "bank" or "roll."

=Skid, to=--To be carried sideways by centrifugal force when turning to
left or right.

=Skid, Undercarriage=--A spar, mounted in a fore and aft direction, and
to which the wheels of the undercarriage are sometimes attached. Should
a wheel give way the skid is then supposed to act like the runner of a
sleigh and to support the aeroplane. [28]

=Skid, Tail=--A piece of wood or other material, orientable, and fitted
with shock absorbers, situated under the tail of an aeroplane in order
to support it upon the ground and to absorb the shock of alighting.
[28_a_]

=Section=--Any separate part of the top surface, that part of the bottom
surface immediately underneath it, with their struts and wires.

=Spar=--Any long piece of wood or other material.

=Spar, Main=--A spar within a surface and to which all the ribs are
attached, such spar being the one situated nearest to the centre of
pressure. It transfers more than half the lift from the ribs to the
bracing. [29]

=Spar, Rear=--A spar within a surface, and to which all the ribs are
attached, such spar being situated at the rear of the centre of pressure
and at a greater distance from it than is the main spar. It transfers
less than half of the lift from the ribs to the bracing. [30]

=Strut=--Any wooden member intended to take merely the stress of direct
compression.

=Strut, Interplane=--A strut holding the top and bottom surfaces
apart. [31]

=Strut, Fuselage=--A strut holding the _fuselage longerons_ apart. It
should be stated whether top, bottom, or side. If side, then it should
be stated whether right or left hand. _Montant_. [32]

=Strut, Extension=--A strut supporting an "extension" when not in
flight. It may also prevent the extension from collapsing upwards during
flight. [33]

=Strut, undercarriage=-- [33_a_]

=Strut, Dope=--A strut within a surface, so placed as to prevent the
tension of the doped fabric from distorting the framework. [34]

=Serving=--To bind round with wire, cord, or similar material. Usually
used in connection with wood joints and wire cable splices.

=Slip, Propeller=--The pitch less the distance the propeller advances
during one revolution.

=Stream-Line=--A form or shape of detrimental surface designed to produce
minimum drift.

=Toss, to=--To plunge tail-down.

=Torque, Propeller=--The tendency of a propeller to turn an aeroplane
about its longitudinal axis in a direction opposite to that in which the
propeller revolves.

=Tail-Slide=--A fall whereby the tail of an aeroplane leads.

=Tractor=--An aeroplane of which the propeller is mounted in front of the
main lifting surface.

=Triplane=--An aeroplane of which the main lifting surface consists of
three surfaces or pairs of wings mounted one above the other.

=Tail-Plane=--A horizontal stabilizing surface mounted at some distance
behind the main lifting surface. _Empennage_. [36]

=Turnbuckle=--A form of wire-tightener, consisting of a barrel into each
end of which is screwed an eyebolt. Wires are attached to the eyebolts
and the required degree of tension is secured by means of rotating the
barrel.

=Thrust, Propeller=--See "Air-Screw."

=Undercarriage=--That part of an aeroplane beneath the _fuselage_ or
_nacelle_, and intended to support the aeroplane when at rest, and to
absorb the shock of alighting.

=Velocity=--Rate of displacement; speed.

=Volplane=--A gliding descent.

=Weight=--Is a measure of the force of the Earth's attraction (gravity)
upon a body. The standard unit of weight in this country is 1 lb., and
is the force of the Earth's attraction on a piece of platinum called
_the standard pound_, deposited with the Board of Trade in London. At
the centre of the Earth a body will be attracted with equal force in
every direction. It will therefore have no weight, though its mass is
unchanged. Gravity, of which weight is a measure, decreases with
increase of altitude.

=Web= (_of a rib_)--That vertical part of a rib which prevents it from
bending upwards. [37_a_]

=Warp, to=--To distort a surface in order to vary its angle of incidence.
To vary the angle of incidence of a controlling surface.

=Wash=--The disturbance of air produced by the flight of an aeroplane.

=Wash-in=--An increasing angle of incidence of a surface towards its
wing-tip. [38]

=Wash-out=--A decreasing angle of incidence of a surface towards its
wing-tip. [39]

=Wing-tip=--The right or left-hand extremity of a surface. [40]

=Wire=--A wire is, in Aeronautics, always known by the name of its
function.

=Wire, Lift or Flying=--A wire opposed to the direction of lift, and used
to prevent a surface from collapsing upward during flight. [41]

=Wire, Anti-lift or Landing=--A wire opposed to the direction of gravity,
and used to sustain a surface when it is at rest. [42]

=Wire, Drift=--A wire opposed to the direction of drift, and used to
prevent a surface from collapsing backwards during flight.

=Wire, Anti-drift=--A wire opposed to the tension of a drift wire, and
used to prevent such tension from distorting the framework. [44]

=Wire, Incidence=--A wire running from the top of an interplane strut
to the bottom of the interplane strut in front of or behind it. It
maintains the "stagger" and assists in maintaining the angle of
incidence. Sometimes termed "stagger wire." [45]

=Wire, Bracing=--Any wire holding together the framework of any part of
an aeroplane. It is not, however, usually applied to the wires described
above unless the function performed includes a function additional to
those described above. Thus, a lift wire, while strictly speaking a
bracing wire, is not usually described as one unless it performs the
additional function of bracing some well-defined part such as the
undercarriage. It will then be said to be an "undercarriage bracing lift
wire." It might, perhaps, be acting as a drift wire also, in which case
it will then be described as an "undercarriage bracing lift-drift
wire." It should always be stated whether a bracing wire is (1) top,
(2) bottom, (3) cross, or (4) side. If a "side bracing wire," then it
should be stated whether right- or left-hand.

=Wire, Internal Bracing=--A bracing wire (usually drift or anti-drift)
within a surface.

=Wire, Top Bracing=--A bracing wire, approximately horizontal and situated
between the top longerons of fuselage, between top tail booms, or at the
top of similar construction. [46]

=Wire, Bottom Bracing=--Ditto, substituting "bottom" for "top." [47]

=Wire, Side Bracing=--A bracing wire crossing diagonally a side bay of
fuselage, tail boom bay, undercarriage side bay or centre-section side
bay. This term is not usually used with reference to incidence wires,
although they cross diagonally the side bays of the cell. It should be
stated whether right- or left-hand. [48]

=Wire, Cross Bracing=--A bracing wire, the position of which is diagonal
from right to left when viewing it from the front of an aeroplane. [49]

=Wire, Control Bracing=--A wire preventing distortion of a controlling
surface. [50]

=Wire, Control=--A wire connecting a controlling surface with the pilot's
control lever, wheel, or rudder-bar. [51]

=Wire, Aileron Gap=--A wire connecting top and bottom ailerons. [52]

=Wire, Aileron Balance=--A wire connecting the right- and left-hand top
ailerons. Sometimes termed the "aileron compensating wire." [53]

=Wire, Snaking=--A wire, usually of soft metal, wound spirally or tied
round another wire, and attached at each end to the framework. Used to
prevent the wire round which it is "snaked" from becoming, in the event
of its displacement, entangled with the propeller.

=Wire, Locking=--A wire used to prevent a turnbuckle barrel or other
fitting from losing its adjustment.

=Wing=--Strictly speaking, a wing is one of the surfaces of an
ornithopter. The term is, however, often applied to the lifting surface
of an aeroplane when such surface is divided into two parts, one being
the left-hand "wing," and the other the right-hand "wing."

=Wind-Tunnel=--A large tube used for experimenting with surfaces and
models, and through which a current of air is made to flow by artificial
means.

=Work=--Force × displacement.

=Wind-Screen=--A small transparent screen mounted in front of the pilot
to protect his face from the air pressure.




Types of Aeroplanes.




[Illustration: Plate I.]

The first machine to fly--of which there is anything like authentic
record--was the Ader "Avion," after which the more notable advances were
made as shown above.


[Illustration: Plate II.]

The Henri Farman was the first widely used aeroplane. Above are shown
the chief steps in its development.


[Illustration: Plate III.]

THE AVRO.--The aeroplane designed and built by Mr. A. V. Roe was the
first successful heavier-than-air flying machine built by a British
subject. Mr. Roe's progress may be followed in the picture, from his
early "canard" biplane, through various triplanes, with 35 J.A.P. and 35
h.p. Green engines, to his successful tractor biplane with the same 35
h.p. Green, thence through the "totally enclosed" biplane 1912, with 60
h.p. Green, to the biplane 1913-14, with 80 h.p. Gnome.


[Illustration: Plate IV.]

THE SOPWITH LAND-GOING BIPLANES.--The earliest was a pair of Wright
planes with a fuselage added. Next was the famous tractor with 80 h.p.
Gnome. Then the "tabloid" of 1913, which set a completely new fashion
in aeroplane design. From this developed the Gordon-Bennett racer shown
over date 1914. The gun-carrier was produced about the same time, and
the later tractor biplane in a development of the famous 80 h.p. but
with 100 h.p. monosoupape Gnome.


[Illustration: Plate V.]

THE MAURICE FARMAN.--First, 1909, the 50-60 h.p. Renault and coil-spring
chassis. 1910, the same chassis with beginning of the characteristic
bent-up skids. 1911 appeared the huge French Military Trials 3-seater;
also the round-ended planes and tails and "Henry" type wheels. This
developed, 1912, into the square-ended planes and upper tail, and long
double-acting ailerons of the British Military Trials. The 1913 type had
two rectangular tail-planes and better seating arrangements, known
affectionately as the "mechanical cow"; the same year came the first
"shorthorn," with two tail-planes and a low nacelle. This finally
developed into the carefully streamlined "shorthorn" with the raised
nacelle and a single tail-plane.


[Illustration: Plate VI.]

THE SHORT "PUSHERS."--In 1909 came the semi-Wright biplane, with 35 h.p.
Green, on which Mr. Moore-Brabazon won the "Daily Mail's" £1000 prize
for the first mile flight on a circuit on a British aeroplane. Then the
first box-kite flown by Mr. Grace at Wolverhampton. Later the famous
"extension" type on which the first Naval officers learned to fly. Then
the "38" type with elevator on the nacelle, on which dozens of R.N.A.S.
pilots were taught.


[Illustration: Plate VII.]

SHORT TRACTORS, 1911-1912.--They were all co-existent, but the first was
the "tractor-pusher" (bottom of picture). Then came the "twin-tractor
plus propeller" (at top). A development was the "triple-tractor" (on the
right), with two 50 h.p. Gnomes, one immediately behind the other under
the cowl, one driving the two chains, the other coupled direct. Later
came the single-engined 80 h.p. tractor (on the left), the original of
the famous Short seaplanes.


[Illustration: Plate VIII.]

THE VICKERS MACHINES: First the Vickers-R.E.P. of 1911, which developed
into the full-bodied No. V. with R.E.P. engine, then the Military Trials
"sociable" with Viale engine, and so to the big No. VII with a 100 h.p.
Gnome. Contemporary with the No. V and No. VI were a number of school
box-kites of ordinary Farman type, which developed into the curious
"pumpkin" sociable, and the early "gun 'bus" of 1913. Thence arrived the
gun-carrier with 100 h.p. monosoupape Gnome.


[Illustration: Plate IX.]

THE BRISTOL AEROPLANES.--First, 1910, Farman type box-kites familiar to
all early pupils. Then the miniature Maurice-Farman type biplane of the
"Circuit of Britain." Contemporaneous was the "floating tail" monoplane
designed by Pierre Prier, and after it a similar machine with fixed
tail. Then came the handsome but unfortunate monoplane designed by
M. Coanda for the Military Trials, 1912.


[Illustration: Plate X.]

THE BRISTOL TRACTORS.--Late 1912 came the round fuselaged tractor, with
Gnome engine, designed by Mr. Gordon England for Turkey. 1912-13 came
the biplane built onto the Military Trials monoplane type fuselage,
also with a Gnome, designed by M. Coanda for Roumania. Then the
Renault-engined Coanda tractor 1913, followed by 80 h.p. Gnome-engined
scout, designed by Messrs. Barnwell and Busteed, which with Gnomes,
le Rhones and Clergets, has been one of the great successes. Almost
contemporary was the two-seater Bristol.


[Illustration: Plate XI.]

THE MARTINSYDES.--1909, first experimental monoplane built with small
4-cylinder engine. J.A.P.-engined machine, 1910, followed by the
Gnome-engined machine, 1911. 1912, first big monoplane with Antoinette
engine was built, followed by powerful Austro-Daimler monoplane, 1913.
Then came the little Gnome-engined scout biplanes, 1914, some with,
some without, skids.


[Illustration: Plate XII.]

THE CURTISS BIPLANES.--In 1909 came the "June-bug," the united product
of Glen Curtiss, Dr. Graham Bell, and J. A. D. McCurdy. Then the
box-kite type, 1909, on which Mr. Curtiss won the Gordon-Bennett Race at
Reims. Next the "rear-elevator" pusher, 1912, followed by first tractor,
1913, with an outside flywheel. All purely Curtiss machines to that
date had independent ailerons intended to get away from Wright patents.
Following these came tractors with engines varying from 70 to 160 h.p.,
fitted with varying types of chassis. All these have ordinary ailerons.


[Illustration: Plate XIII.]

THE BLERIOT (1).--The first engine-driven machine was a "canard"
monoplane. Then came the curious tractor monoplanes 1908-1909, in
order shown. Famous "Type XI" was prototype of all Bleriot successes.
"Type XII" was never a great success, though the ancestor of the popular
"parasol" type. The big passenger carrier was a descendant of this type.


[Illustration: Plate XIV.]

THE BLERIOT (2):--1910, "Type XI," on which Mr. Grahame-White won
Gordon-Bennett Race, with a 14-cylinder 100 h.p. Gnome. 1911 came the
improved "Type XI," with large and effective elevator flaps. On this
type, with a 50 h.p. Gnome, Lieut. de Conneau (M. Beaumont) won
Paris-Rome Race and "Circuit of Britain." Same year saw experimental
"Limousine" flown by M. Legagneux, and fast but dangerous "clipped-wing"
Gordon-Bennett racer with the fish-tail, flown by Mr. Hamel. About the
same time came the fish-tailed side-by-side two-seater, flown by Mr.
Hamel at Hendon and by M. Perreyon in 1912 Military Trials. 1911, M.
Bleriot produced the 100 h.p. three-seater which killed M. Desparmets in
French Military Trials. 1912-13, M. Bleriot produced a quite promising
experimental biplane, and a "monocoque" monoplane in which the passenger
faced rearward.


[Illustration: Plate XV.]

THE BLERIOT (3)--1912 tandem two-seater proved one of the best machines
of its day. 1913 "canard" lived up to its name. A "pusher" monoplane was
built in which the propeller revolved on the top tail boom. This machine
came to an untimely end, with the famous pilot, M. Perreyon. 1912
"tandem" was developed in 1914 into the type shown in centre; almost
simultaneously "parasol" tandem appeared. 1914, M. Bleriot built a
monoplane embodying a most valuable idea never fully developed. The
engine tanks and pilot were all inside an armoured casing. Behind them
the fuselage was a "monocoque" of three-ply wood bolted onto the armour.
And behind this all the tail surfaces were bolted on as a separate unit.


[Illustration: Plate XVI.]

THE CAUDRON.--1910, came the machine with ailerons and a 28 h.p. Anzani.
1911 this was altered to warp control and a "star" Anzani was fitted.
From this came the 35 h.p. type of 1912, one of the most successful
of school machines. Small fast monoplane, 1912, was never further
developed. 1913 appeared the familiar biplanes with 80 h.p. Gnomes,
and 5-seater with 100 h.p. Anzani for French "Circuit of Anjou." 1914
produced the "scout" biplane which won at Vienna. 1915 appeared the
twin-engined type, the first successful "battle-plane."


[Illustration: Plate XVII.]

THE DEPERDUSSIN.--In 1911 the little monoplane with a Gyp. engine.
Then the Gnome-engined machine of the "Circuit of Europe." In 1912 came
the Navy's machine with 70 h.p. Gnome, and Prevost's Gordon-Bennett
"Bullet," 135 miles in the hour. The last was the British-built
"Thunder-Bug," familiar at Hendon.


[Illustration: Plate XVIII.]

THE BREGUET.--First to fly was the complicated but business-like machine
of 1909. Then came the record passenger carrier, 1910 (which lifted 8
passengers). 1911 the French Military Trials machine with geared-down
100 h.p. Gnome appeared. 1912 produced the machine with 130 h.p. Salmson
engine on which the late Mr. Moorhouse flew the Channel with Mrs.
Moorhouse and Mr. Ledeboer as passengers; also the machine with 130 h.p.
horizontal Salmson, known as the "Whitebait." The last before the war
was the rigid wing machine with 200 h.p. Salmson.


[Illustration: Plate XIX.]

THE CODY.--First the Military Experiment of 1908, with an Antoinette
engine, then improved type 1909 with a Green engine. Next the
"Cathedral," 1910, with a Green engine, which won Michelin Prize. In
1911 "Daily Mail" Circuit machine, also with a Green, won the Michelin.
This was modified into 1912 type which won Military Competition and
£5,000 in prizes, with an Austro-Daimler engine, and later the Michelin
Circuit Prize, again with a Green. 1912 the only Cody Monoplane was
built. 1913 a modified biplane on which the great pioneer was killed.


[Illustration: Plate XX.]

THE NIEUPORT.--The first Nieuport of 1909 was curiously like a monoplane
version of a Caudron. In 1910 came the little two-cylinder machine with
fixed tail-plane and universally jointed tail. In 1911 the French Trials
machine was built with 100 h.p. 14 cylinder Gnome, and is typical of
this make. Also the little two-cylinder record breaker. A modification
of 1913 was the height record machine of the late M. Legagneux.


[Illustration: Plate XXI.]

THE R.E.P. MONOPLANES.--First came the curious and highly interesting
experiments of 1907, 1908, 1909, and 1910. 1910-1911, the World's
Distance Record breaker was produced; after it, the "European Circuit,"
all with R.E.P. engines. In 1913-14 came the French military type with
Gnome engine and finally the "parasol," 1915.


[Illustration: Plate XXII.]

THE MORANE: First the European Circuit and Paris-Madrid type. Then the
1912 types, with taper wing and modern type wing. The 1913 types, the
"clipped wing," flown by the late Mr. Hamel, one of the standard tandem
types now in use. About the same time came the "parasol." 1914-15 came
a little biplane like a Nieuport, and the "destroyer" type with a round
section body, flown by Vedrines.


[Illustration: Plate XXIII.]

THE VOISIN.--1908, the first properly controlled flight on a European
aeroplane was made on a Voisin of the type shown with fixed engine.
Then followed the record breaker of 1909 with a Gnome engine. In 1909
also the only Voisin tractor was produced. 1910 the Paris-Bordeaux type
was built; 1911 the amphibious "canard" and the "military" type with
extensions, and the type without an elevator. 1913 came the type with
only two tail-booms and a geared-down engine, which developed into the
big "gun" machine with a Salmson engine.


[Illustration: Plate XXIV.]

THE HANRIOT AND PONNIER MONOPLANES.--In 1909 came the first Hanriot with
50 h.p. 6-cylinder Buchet engine, and in 1910 the famous "Henrietta"
type with E.N.Vs. and stationary Clergets. 1911 came the Clerget
two-seater entered in French Military Trials, and 1912 the 100 h.p.
Hanriot-Pagny monoplane which took part in British Military Trials.
Sister machines of the same year were the single seater with 50 h.p.
Gnome and the 100 h.p. Gnome racer with stripped chassis. In 1913 the
Ponnier-Pagny racing monoplane with 160 h.p. Le Rhone competed in the
Gordon-Bennett race, doing about 130 miles in the hour. The 60 h.p.
Ponnier biplane was the first successful French scout tractor biplane.


[Illustration: Plate XXV.]

THE WRIGHT BIPLANE.--The first power flights were made, 1903, on a
converted glider fitted with 16 h.p. motor. The prone position of the
pilot will be noted. By 1907 the machine had become reasonably practical
with 40 h.p. motor. On this the first real flying in the world was done.
In 1910 the miniature racing Wright was produced; also the type with a
rear elevator in addition to one in front. Soon afterwards the front
elevator disappeared, and the machine became the standard American
exhibition and school machine for four years. In 1915 a machine with
enclosed fuselage was produced.


[Illustration: Plate XXVI.]

THE BLACKBURN MONOPLANES.--In 1909 was built the curious four-wheeled
parasol-type machine with 35 h.p. Green engine and chain transmission,
on which flying was done at Saltburn. In 1911 the Isaacson-engined
machine was built, together with a 50 h.p. Gnome single-seater on which
Mr. Hucks started in the Circuit of Britain race. In 1912 another 50
h.p. single-seater was built on which a good deal of school work was
done. A more advanced machine appeared in 1913 and a two-seater with
80 h.p. Gnome did a great deal of cross-country work in 1913-14.


[Illustration: Plate XXVII.]

In 1908 the first Antoinette monoplane was produced by MM. Gastambide
and Mengin. Then followed a machine with central skids, a single wheel,
and wing skids. In 1909 came the machine with four-wheeled chassis and
ailerons and later an improved edition which reverted to the central
skid idea. On this M. Latham made his first cross-channel attempt.
The next machine shed the wing skids and widened its wheelbase.
During 1910-11 the ailerons vanished, warp control was adopted and the
king-post system of wing-bracing was used. In 1911 the curious machine
with streamlined "pantalette" chassis, totally enclosed body and
internal wing-bracing, was produced for French Military Trials. In 1912
the three-wheeled machine was used to a certain extent in the French
Army. Then the type disappeared.


[Illustration: Plate XXVIII.]

In 1908 and 1909 detached experimental machines in various countries
attained a certain success. The late Capt. Ferber made a primitive
tractor biplane 1908. The Odier-Vendome biplane was a curious bat-winged
pusher biplane built 1909. The tailless Etrich monoplane, built in
Austria, 1908, was an adaptation of the Zanonia leaf. M. Santos-Dumont
made primitive parasol type monoplanes known as "Demoiselles," in which
bamboo was largely used. 1909 type is seen above. A curious steel
monoplane was built by the late John Moisant, 1909. The twin-pusher
biplane, built by the Barnwell Bros. in Scotland, made one or two
straight flights in 1909. The Clement-Bayard Co. in France constructed
in 1909 a biplane which did fairly well. Hans Grade, the first German
to fly, made his early efforts on a "Demoiselle" type machine, 1908.


[Illustration: Plate XXIX.]

In 1910 a number of novel machines were produced. The Avis with Anzani
engine was flown by the Hon. Alan Boyle. Note the cruciform universally
jointed tail. The Goupy with 50 h.p. Gnome was an early French tractor,
notable for its hinging wing-tips. The Farman was a curious "knock-up"
job, chiefly composed of standard box-kite fittings. The Sommer with
50 h.p. Gnome was a development of the box-kite with a shock-breaking
chassis. The Savary, also French, was one of the first twin tractors to
fly. The model illustrated had an E.N.V. engine. Note position of the
rudders on the wing tips. The Austrian Etrich was the first successful
machine of the Taube class ever built.


[Illustration: Plate XXX.]

INTERESTING MACHINES, 1910.--The Werner monoplane with E.N.V. engine,
combined shaft and chain drive, was a variant of the de Pischoff. The
Macfie biplane was a conventional biplane with 50 h.p. Gnome and useful
originalities. The Valkyrie monoplane, another British machine, was a
"canard" monoplane with propeller behind the pilot and in front of main
plane. The Weiss monoplane was a good British effort at inherent
stability. The Tellier monoplane was a modified Bleriot with Antoinette
proportions. The Howard Wright biplane was a pusher with large lifting
monoplane tail. The Dunne biplane was another British attempt at
inherent stability. The Jezzi biplane was an amateur built
twin-propeller.


[Illustration: Plate XXXI.]

SOME INTERESTING MACHINES, 1911.--The Compton-Paterson biplane was very
similar to the early Curtiss pusher; it had a 50 h.p. Gnome. The Sloan
bicurve was a French attempt at inherent stability with 50 h.p. Gnome
and tractor screw. The Paulhan biplane was an attempt at a machine for
military purposes to fold up readily for transport. The Sanders was
a British biplane intended for rough service. The Barnwell monoplane
was the first Scottish machine to fly; it had a horizontally opposed
Scottish engine. The Harlan monoplane was an early German effort; note
position of petrol tank.


[Illustration: Plate XXXII.]

The Clement-Bayard monoplane, 1911, was convertible into a tractor
biplane. The standard engine was a 50 h.p. Gnome. The machine was
interesting, but never did much. The Zodiac was one of the earliest
to employ staggered wings. With 50 h.p. Gnome engine it was badly
underpowered, so never did itself justice. The Jezzi tractor biplane,
1911, was a development of an earlier model built entirely by Mr. Jezzi,
an amateur constructor. With a low-powered J.A.P. engine it developed
an amazing turn of speed, and it may be regarded as a forerunner of the
scout type and the properly streamlined aeroplane. The Paulhan-Tatin
monoplane, 1911, was a brilliant attempt at high speed for low power;
it presented certain advantages as a scout. A 50 h.p. Gnome, fitted
behind the pilot's seat in the streamlined fuselage, was cooled through
louvres. The propeller at the end of the tail was connected with the
engine by a flexible coupling. This machine was, in its day, the fastest
for its power in the world, doing 80 miles per hour. Viking 1 was a twin
tractor biplane driven by a 50 h.p. Gnome engine through chains. It was
built by the author at Hendon in 1912.


[Illustration: Plate XXXIII.]

Much ingenuity was exerted by the French designers in 1911 to
produce machines for the Military Trials. Among them was the 100 h.p.
Gnome-Borel monoplane with a four-wheeled chassis, and the Astra
triplane with a 75 h.p. Renault engine. This last had a surface of about
500 square feet and presented considerable possibilities. Its principal
feature was its enormous wheels with large size tyres as an attempt to
solve difficulties of the severe landing tests. The Clement-Bayard
biplane was a further development of the Clement-Bayard monoplane;
the type represented could be converted into a monoplane at will. The
Lohner Arrow biplane with the Daimler engine was an early German tractor
biplane built with a view to inherent stability, and proved very
successful. The Pivot monoplane was of somewhat unconventional French
construction, chiefly notable for the special spring chassis and pivoted
ailerons at the main planes; this pivoting had nothing to do with the
name of the machine, which was designed by M. Pivot.


[Illustration: Plate XXXIV.]

The Flanders monoplane, 1912, with 70 h.p. Renault engine, was one of
the last fitted with king-post system of wing bracing. The Flanders
biplane entered for British Military Trials. Notable features: the
highly staggered planes, extremely low chassis and deep fuselage. Also,
the upper plane was bigger in every dimension than the lower; about
the first instance of this practice. The Bristol biplane, with 100 h.p.
Gnome engine, was also entered for the Trials, but ultimately withdrawn.
The Mars monoplane, later known as the "D.F.W.," was a successful
machine of Taube type with 120 h.p. Austro-Daimler engine. The building
of the engine into a cowl, complete with radiator in front, followed car
practice very closely. The tail of the monoplane had a flexible trailing
edge; its angle of incidence could be varied from the pilot's seat,
so that perfect longitudinal balance was attained at all loadings and
speeds. The Handley-Page monoplane, with 70 h.p. Gnome engine, was an
early successful British attempt at inherent stability.


[Illustration: Plate XXXV.]

The Sommer monoplane, with 50 h.p. Gnome, was a 1911-12 machine; it did
a good deal of cross-country flying. The Vendome monoplane of 1912, also
with 50 h.p. Gnome engine, was notable chiefly for its large wheels
and jointed fuselage, which enabled the machine to be taken down for
transport. The Savary biplane took part in the French Military Trials,
1911. It had a four-cylinder Labor aviation motor. Notable features are
twin chain-driven propellers, rudders between the main planes, the broad
wheel-base and the position of the pilot. The Paulhan triplane, which
also figured in the French Military Trials, was a development of the
Paulhan folding biplane. It had a 70 h.p. Renault engine. For practical
purposes it was a failure. The R.E.P. biplane, with 60 h.p. R.E.P.
engine, was a development of the famous R.E.P. monoplanes. Its spring
chassis, with sliding joints, marked an advance. Like the monoplanes,
it was built largely of steel.


[Illustration: Plate XXXVI.]

In 1912 came the first really successful Handley-Page monoplane, with
50 h.p. Gnome engine. The Short monoplane, was built generally on
Bleriot lines. Its chassis was an original feature. The Coventry
Ordnance biplane was a two-seater tractor built for the British Military
Trials. It had a 100 h.p. 14-cylinder Gnome engine, with propeller
geared down through a chain drive. The machine was an interesting
experiment, but not an unqualified success. The Moreau "Aerostable,"
fitted with a 50 h.p. Gnome, was a French attempt to obtain automatic
stability, but it only operated longitudinally. The pilot's nacelle was
pivoted under the main planes, wires were attached to the control
members so that the movements of the nacelle in its efforts to keep a
level keel brought them into operation. The Mersey monoplane, an entrant
for the British Military Trials, was designed to present a clear field
of view and fire. The 45 h.p. Isaacson engine was connected by a shaft
to a propeller mounted behind the nacelle on the top tail boom. It was a
promising experiment, but came to grief. The Radley-Moorhouse monoplane
was a sporting type machine on Bleriot lines, with 50 h.p. Gnome engine.
It was notable for its streamlined body and disc wheels.






End of the Project Gutenberg EBook of The Aeroplane Speaks, by H. Barber

*** END OF THIS PROJECT GUTENBERG EBOOK THE AEROPLANE SPEAKS ***

***** This file should be named 21791-8.txt or 21791-8.zip *****
This and all associated files of various formats will be found in:
        http://www.gutenberg.org/2/1/7/9/21791/

Produced by Jonathan Ingram, Marvin A. Hodges, David Garcia
and the Online Distributed Proofreading Team at
http://www.pgdp.net


Updated editions will replace the previous one--the old editions
will be renamed.

Creating the works from public domain print editions means that no
one owns a United States copyright in these works, so the Foundation
(and you!) can copy and distribute it in the United States without
permission and without paying copyright royalties.  Special rules,
set forth in the General Terms of Use part of this license, apply to
copying and distributing Project Gutenberg-tm electronic works to
protect the PROJECT GUTENBERG-tm concept and trademark.  Project
Gutenberg is a registered trademark, and may not be used if you
charge for the eBooks, unless you receive specific permission.  If you
do not charge anything for copies of this eBook, complying with the
rules is very easy.  You may use this eBook for nearly any purpose
such as creation of derivative works, reports, performances and
research.  They may be modified and printed and given away--you may do
practically ANYTHING with public domain eBooks.  Redistribution is
subject to the trademark license, especially commercial
redistribution.



*** START: FULL LICENSE ***

THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full Project
Gutenberg-tm License (available with this file or online at
http://gutenberg.org/license).


Section 1.  General Terms of Use and Redistributing Project Gutenberg-tm
electronic works

1.A.  By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement.  If you do not agree to abide by all
the terms of this agreement, you must cease using and return or destroy
all copies of Project Gutenberg-tm electronic works in your possession.
If you paid a fee for obtaining a copy of or access to a Project
Gutenberg-tm electronic work and you do not agree to be bound by the
terms of this agreement, you may obtain a refund from the person or
entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B.  "Project Gutenberg" is a registered trademark.  It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement.  There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement.  See
paragraph 1.C below.  There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this agreement
and help preserve free future access to Project Gutenberg-tm electronic
works.  See paragraph 1.E below.

1.C.  The Project Gutenberg Literary Archive Foundation ("the Foundation"
or PGLAF), owns a compilation copyright in the collection of Project
Gutenberg-tm electronic works.  Nearly all the individual works in the
collection are in the public domain in the United States.  If an
individual work is in the public domain in the United States and you are
located in the United States, we do not claim a right to prevent you from
copying, distributing, performing, displaying or creating derivative
works based on the work as long as all references to Project Gutenberg
are removed.  Of course, we hope that you will support the Project
Gutenberg-tm mission of promoting free access to electronic works by
freely sharing Project Gutenberg-tm works in compliance with the terms of
this agreement for keeping the Project Gutenberg-tm name associated with
the work.  You can easily comply with the terms of this agreement by
keeping this work in the same format with its attached full Project
Gutenberg-tm License when you share it without charge with others.

1.D.  The copyright laws of the place where you are located also govern
what you can do with this work.  Copyright laws in most countries are in
a constant state of change.  If you are outside the United States, check
the laws of your country in addition to the terms of this agreement
before downloading, copying, displaying, performing, distributing or
creating derivative works based on this work or any other Project
Gutenberg-tm work.  The Foundation makes no representations concerning
the copyright status of any work in any country outside the United
States.

1.E.  Unless you have removed all references to Project Gutenberg:

1.E.1.  The following sentence, with active links to, or other immediate
access to, the full Project Gutenberg-tm License must appear prominently
whenever any copy of a Project Gutenberg-tm work (any work on which the
phrase "Project Gutenberg" appears, or with which the phrase "Project
Gutenberg" is associated) is accessed, displayed, performed, viewed,
copied or distributed:

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org

1.E.2.  If an individual Project Gutenberg-tm electronic work is derived
from the public domain (does not contain a notice indicating that it is
posted with permission of the copyright holder), the work can be copied
and distributed to anyone in the United States without paying any fees
or charges.  If you are redistributing or providing access to a work
with the phrase "Project Gutenberg" associated with or appearing on the
work, you must comply either with the requirements of paragraphs 1.E.1
through 1.E.7 or obtain permission for the use of the work and the
Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or
1.E.9.

1.E.3.  If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any additional
terms imposed by the copyright holder.  Additional terms will be linked
to the Project Gutenberg-tm License for all works posted with the
permission of the copyright holder found at the beginning of this work.

1.E.4.  Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.

1.E.5.  Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.

1.E.6.  You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including any
word processing or hypertext form.  However, if you provide access to or
distribute copies of a Project Gutenberg-tm work in a format other than
"Plain Vanilla ASCII" or other format used in the official version
posted on the official Project Gutenberg-tm web site (www.gutenberg.org),
you must, at no additional cost, fee or expense to the user, provide a
copy, a means of exporting a copy, or a means of obtaining a copy upon
request, of the work in its original "Plain Vanilla ASCII" or other
form.  Any alternate format must include the full Project Gutenberg-tm
License as specified in paragraph 1.E.1.

1.E.7.  Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8.  You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works provided
that

- You pay a royalty fee of 20% of the gross profits you derive from
     the use of Project Gutenberg-tm works calculated using the method
     you already use to calculate your applicable taxes.  The fee is
     owed to the owner of the Project Gutenberg-tm trademark, but he
     has agreed to donate royalties under this paragraph to the
     Project Gutenberg Literary Archive Foundation.  Royalty payments
     must be paid within 60 days following each date on which you
     prepare (or are legally required to prepare) your periodic tax
     returns.  Royalty payments should be clearly marked as such and
     sent to the Project Gutenberg Literary Archive Foundation at the
     address specified in Section 4, "Information about donations to
     the Project Gutenberg Literary Archive Foundation."

- You provide a full refund of any money paid by a user who notifies
     you in writing (or by e-mail) within 30 days of receipt that s/he
     does not agree to the terms of the full Project Gutenberg-tm
     License.  You must require such a user to return or
     destroy all copies of the works possessed in a physical medium
     and discontinue all use of and all access to other copies of
     Project Gutenberg-tm works.

- You provide, in accordance with paragraph 1.F.3, a full refund of any
     money paid for a work or a replacement copy, if a defect in the
     electronic work is discovered and reported to you within 90 days
     of receipt of the work.

- You comply with all other terms of this agreement for free
     distribution of Project Gutenberg-tm works.

1.E.9.  If you wish to charge a fee or distribute a Project Gutenberg-tm
electronic work or group of works on different terms than are set
forth in this agreement, you must obtain permission in writing from
both the Project Gutenberg Literary Archive Foundation and Michael
Hart, the owner of the Project Gutenberg-tm trademark.  Contact the
Foundation as set forth in Section 3 below.

1.F.

1.F.1.  Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
public domain works in creating the Project Gutenberg-tm
collection.  Despite these efforts, Project Gutenberg-tm electronic
works, and the medium on which they may be stored, may contain
"Defects," such as, but not limited to, incomplete, inaccurate or
corrupt data, transcription errors, a copyright or other intellectual
property infringement, a defective or damaged disk or other medium, a
computer virus, or computer codes that damage or cannot be read by
your equipment.

1.F.2.  LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees.  YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH F3.  YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.

1.F.3.  LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from.  If you
received the work on a physical medium, you must return the medium with
your written explanation.  The person or entity that provided you with
the defective work may elect to provide a replacement copy in lieu of a
refund.  If you received the work electronically, the person or entity
providing it to you may choose to give you a second opportunity to
receive the work electronically in lieu of a refund.  If the second copy
is also defective, you may demand a refund in writing without further
opportunities to fix the problem.

1.F.4.  Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE.

1.F.5.  Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of damages.
If any disclaimer or limitation set forth in this agreement violates the
law of the state applicable to this agreement, the agreement shall be
interpreted to make the maximum disclaimer or limitation permitted by
the applicable state law.  The invalidity or unenforceability of any
provision of this agreement shall not void the remaining provisions.

1.F.6.  INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in accordance
with this agreement, and any volunteers associated with the production,
promotion and distribution of Project Gutenberg-tm electronic works,
harmless from all liability, costs and expenses, including legal fees,
that arise directly or indirectly from any of the following which you do
or cause to occur: (a) distribution of this or any Project Gutenberg-tm
work, (b) alteration, modification, or additions or deletions to any
Project Gutenberg-tm work, and (c) any Defect you cause.


Section  2.  Information about the Mission of Project Gutenberg-tm

Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of computers
including obsolete, old, middle-aged and new computers.  It exists
because of the efforts of hundreds of volunteers and donations from
people in all walks of life.

Volunteers and financial support to provide volunteers with the
assistance they need, is critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come.  In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future generations.
To learn more about the Project Gutenberg Literary Archive Foundation
and how your efforts and donations can help, see Sections 3 and 4
and the Foundation web page at http://www.pglaf.org.


Section 3.  Information about the Project Gutenberg Literary Archive
Foundation

The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service.  The Foundation's EIN or federal tax identification
number is 64-6221541.  Its 501(c)(3) letter is posted at
http://pglaf.org/fundraising.  Contributions to the Project Gutenberg
Literary Archive Foundation are tax deductible to the full extent
permitted by U.S. federal laws and your state's laws.

The Foundation's principal office is located at 4557 Melan Dr. S.
Fairbanks, AK, 99712., but its volunteers and employees are scattered
throughout numerous locations.  Its business office is located at
809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email
[email protected].  Email contact links and up to date contact
information can be found at the Foundation's web site and official
page at http://pglaf.org

For additional contact information:
     Dr. Gregory B. Newby
     Chief Executive and Director
     [email protected]


Section 4.  Information about Donations to the Project Gutenberg
Literary Archive Foundation

Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment.  Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.

The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States.  Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements.  We do not solicit donations in locations
where we have not received written confirmation of compliance.  To
SEND DONATIONS or determine the status of compliance for any
particular state visit http://pglaf.org

While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.

International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States.  U.S. laws alone swamp our small staff.

Please check the Project Gutenberg Web pages for current donation
methods and addresses.  Donations are accepted in a number of other
ways including checks, online payments and credit card donations.
To donate, please visit: http://pglaf.org/donate


Section 5.  General Information About Project Gutenberg-tm electronic
works.

Professor Michael S. Hart is the originator of the Project Gutenberg-tm
concept of a library of electronic works that could be freely shared
with anyone.  For thirty years, he produced and distributed Project
Gutenberg-tm eBooks with only a loose network of volunteer support.


Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as Public Domain in the U.S.
unless a copyright notice is included.  Thus, we do not necessarily
keep eBooks in compliance with any particular paper edition.


Most people start at our Web site which has the main PG search facility:

     http://www.gutenberg.org

This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.